# Embedded Controller (EC) [TOC] > **Note** - This document covers the legacy Chrome EC implementation. The > legacy EC implementation is used by all Chromebook reference designs prior to > July 2021. On newer Chromebook designs, the EC implementation is based on the > Zephyr RTOS. Refer to the [Zephyr EC Introduction](./docs/zephyr/README.md) > for details on the Zephyr EC implementation. ## Introduction The Chromium OS project includes open source software for embedded controllers (EC) used in recent ARM and x86 based Chromebooks. This software includes a lightweight, multitasking OS with modules for power sequencing, keyboard control, thermal control, battery charging, and verified boot. The EC software is written in C and supports [a variety of micro-controllers](https://chromium.googlesource.com/chromiumos/platform/ec/+/main/chip/). This document is a guide to help make you familiar with the EC code, current features, and the process for submitting code patches. For more see the Chrome OS Embedded Controller [presentation](https://docs.google.com/presentation/d/1Xa_Z6SjW-soPvkugAR8__TEJFrJpzoZUa9HNR14Sjs8/pub?start=false&loop=false&delayms=3000) and [video](http://youtu.be/Ie7LRGgCXC8) from the [2014 Firmware Summit](http://dev.chromium.org/chromium-os/2014-firmware-summit). ## What you will need 1. A Chromebook with a compatible EC. This includes the Samsung Chromebook (XE303C12) and all Chromebooks shipped after the Chromebook Pixel 2013 (inclusive). See the [Chrome OS devices](http://dev.chromium.org/chromium-os/developer-information-for-chrome-os-devices) page for a list. 1. A Linux development environment. The latest Debian Stable (x86_64) is commonly used. Linux in a VM may work if you have a powerful host machine. 1. A [servo debug board](http://dev.chromium.org/chromium-os/servo) (and header) is highly recommended for serial console and JTAG access to the EC. 1. A sense of adventure! ## Terminology ### EC EC (aka Embedded Controller) can refer to many things in the Chrome OS documentation due to historical reasons. If you just see the term "EC", it probably refers to "the" EC (i.e. the first one that existed). Most Chrome OS devices have an MCU, known as "the EC" that controls lots of things (key presses, turning the AP on/off). The OS that was written for "the" EC is now running on several different MCUs on Chrome OS devices with various tweaks (e.g. the FPMCU, the touchpad one that can do palm rejection, etc.). It's quite confusing, so try to be specific and use terms like FPMCU to distinguish the fingerprint MCU from "the EC". See the [EC Acronyms and Technologies](./docs/ec_terms.md) for a more complete glossary. ## Getting the EC code The code for the EC is open source and is included in the Chromium OS development environment (`~/trunk/src/platform/ec/`). See[ http://www.chromium.org/chromium-os/quick-start-guide](http://dev.chromium.org/chromium-os/quick-start-guide) for build setup instructions. If you want instant gratification, you can fetch the source code directly. However, you will need the tool-chain provided by the Chromium OS development environment to build a binary. ```bash git clone https://chromium.googlesource.com/chromiumos/platform/ec ``` The source code can also be browsed on the web at: https://chromium.googlesource.com/chromiumos/platform/ec/ ## Code Overview The following is a quick overview of the top-level directories in the EC repository: **baseboard** - Code and configuration details shared by a collection of board variants. Tightly linked with the `board` directory described below. **board** - Board specific code and configuration details. This includes the GPIO map, battery parameters, and set of tasks to run for the device. **build** - Build artifacts are generated here. Be sure to delete this and rebuild when switching branches and before "emerging" (see Building an EC binary below). make clobber is a convenient way to clean up before building. **chip** - IC specific code for interfacing with registers and hardware blocks (adc, jtag, pwm, uart etc…) **core** - Lower level code for task and memory management. **common** - A mix of upper-level code that is shared across boards. This includes the charge state machine, fan control, and the keyboard driver (among other things). **driver** - Low-level drivers for light sensors, charge controllers, I2C/onewire LED controllers, and I2C temperature sensors. **include** - Header files for core and common code. **util** - Host utilities and scripts for flashing the EC. Also includes “ectool” used to query and send commands to the EC from userspace. **test** - Unit tests for EC components. These can be run locally in a mock "host" environment or compiled for a target board. If building for a target board, the test must be flashed and run manually on the device. All unit tests and fuzzers are build/run using the local host environment during a `buildall`. To run all unit tests locally, run `make runhosttests -j`. To build a specific unit test for a specific board, run `make test- BOARD=`. Please contribute new tests if writing new functionality. Please run `make help` for more detail. **fuzz** - Fuzzers for EC components. These fuzzers are expected to run in the mock host environment. They follow the same rules as unit tests, as thus use the same commands to build and run. ## Firmware Branches Each Chrome device has a firmware branch created when the read-only firmware is locked down prior to launch. This is done so that updates can be made to the read-write firmware with a minimal set of changes from the read-only. Some Chrome devices only have build targets on firmware branches and not on cros/main. Run “`git branch -a | grep firmware`” to locate the firmware branch for your board. Note that for devices still under development, the board configuration may be on the branch for the platform reference board. To build EC firmware on a branch, just check it out and build it: ```bash git checkout cros/firmware-falco_peppy-4389.B ``` To make changes on a branch without creating a whole new development environment (chroot), create a local tracking branch: ```bash git branch --track firmware-falco_peppy-4389.B cros/firmware-falco_peppy-4389.B git checkout firmware-falco_peppy-4389.B make clobber # repo upload --cbr . # (The --cbr means "upload to the current branch") ``` Here is a useful command to see commit differences between branches (change the branch1...branch2 as needed): ```bash git log --left-right --graph --cherry-pick --oneline branch1...branch2 ``` For example, to see the difference between cros/main and the HEAD of the current branch: ```bash git log --left-right --graph --cherry-pick --oneline cros/main...HEAD # Note: Use three dots “...” or it won’t work! ``` ## Building an EC binary Note: The EC is normally built from within the Chromium OS development chroot to use the correct toolchain. Building directly from the EC repository: ```bash cros_sdk cd ~/chromiumos/src/platform/ec make -j BOARD= ``` Where `` is replaced by the name of the board you want to build an EC binary for. For example, the boardname for the Chromebook Pixel is “link”. The make command will generate an EC binary at `build//ec.bin`. The `-j` tells make to build multi-threaded which can be much faster on a multi-core machine. ### Building via emerge (the build file used when you build Chrome OS): (optional) Run this command if you want to build from local source instead of the most recent stable version: ```bash cros_workon- start chromeos-ec ``` Build the EC binary: ``` emerge- chromeos-ec ``` Please be careful if doing both local `make`s and running emerge. The emerge can pick up build artifacts from the build subdirectory. It’s best to delete the build directory before running emerge with `make clobber`. The generated EC binary from emerge is found at: ``` (chroot) $ /build//firmware/ec.bin ``` or ``` (chroot) $ /build//firmware//ec.bin ``` The `devicename` is the name of a device (also referred as board or variant) which belongs to a family of baseboard. `boardname` is the baseboard name in this case. Example : `/build/dedede/firmware/madoo/ec.bin` The ebuild file used by Chromium OS is found [here](https://chromium.googlesource.com/chromiumos/overlays/chromiumos-overlay/+/main/chromeos-base/chromeos-ec/chromeos-ec-9999.ebuild): ```bash (chroot) $ ~/trunk/src/third_party/chromiumos-overlay/chromeos-base/chromeos-ec/chromeos-ec-9999.ebuild ``` ## Flashing an EC binary to a board ### Flashing via the servo debug board If you get an error, you may not have set up the dependencies for servo correctly. The EC (on current Chromebooks) must be powered either by external power or a charged battery for re-flashing to succeed. You can re-flash via servo even if your existing firmware is bad. ```bash (chroot) $ sudo emerge openocd ``` ```bash (chroot) $ ~/trunk/src/platform/ec/util/flash_ec --board= [--image=] ``` Note: This command will fail if write protect is enabled. If you build your own EC firmware with the `make BOARD=` command the firmware image will be at: ```bash (chroot) $ ~/trunk/src/platform/ec/build//ec.bin ``` If you build Chrome OS with `build_packages` the firmware image will be at: ```bash (chroot) $ /build//firmware/ec.bin ``` or ``` (chroot) $ /build//firmware//ec.bin ``` The `devicename` is the name of a device (also referred as board or variant) which belongs to a family of baseboard. `boardname` is the baseboard name in this case. Example : `/build/dedede/firmware/madoo/ec.bin` Specifying `--image` is optional. If you leave off the `--image` argument, the `flash_ec` script will first look for a locally built `ec.bin` followed by one generated by `emerge`. ### Flashing on-device via flashrom Assuming your devices boots, you can flash it using the `flashrom` utility. Copy your binary to the device and run: ```bash (chroot) $ flashrom -p ec -w ``` Note: `-p internal:bus=lpc` also works on x86 boards...but why would you want to remember and type all that? ## Preventing the RW EC firmware from being overwritten by Software Sync at boot A feature called "Software Sync" keeps a copy of the read-write (RW) EC firmware in the RW part of the system firmware image. At boot, if the RW EC firmware doesn't match the copy in the system firmware, the EC’s RW section is re-flashed. While this is great for normal use as it makes updating the EC and system firmware a unified operation, it can be a challenge for EC firmware development. To disable software sync a flag can be set in the system firmware. Run the following commands from a shell on the device to disable Software Sync and turn on other developer-friendly flags (note that write protect must be disabled for this to work): ```bash # futility gbb --set --flash --flags=0x239 ``` ```bash # reboot ``` This turns on the following flags: * `GBB_FLAG_DEV_SCREEN_SHORT_DELAY` * `GBB_FLAG_FORCE_DEV_SWITCH_ON` * `GBB_FLAG_FORCE_DEV_BOOT_USB` * `GBB_FLAG_DISABLE_FW_ROLLBACK_CHECK` * `GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC` The `GBB` (Google Binary Block) flags are defined in the [vboot_reference source](https://chromium.googlesource.com/chromiumos/platform/vboot_reference/+/main/firmware/2lib/include/2struct.h). A varying subset of these flags are implemented and/or relevant for any particular board. ## Using the EC serial console The EC has an interactive serial console available only through the UART connected via servo. This console is essential to developing and debugging the EC. Find the serial device of the ec console (on your workstation): ```bash (chroot) $ dut-control ec_uart_pty ``` Connect to the console: ```bash (chroot) $ socat READLINE /dev/pts/XX ``` Where `XX` is the device number. Use `cu`, `minicom`, or `screen` if you prefer them over `socat`. ### Useful EC console commands: **help** - get a list of commands. help to get help on a specific command. **chan** - limit logging message to specific tasks (channels). Useful if you’re looking for a specific error or warning and don’t want spam from other tasks. **battfake** - Override the reported battery charge percentage. Good for testing low battery conditions (LED behavior for example). Set “battfake -1” to go back to the actual value. **fanduty** - Override automatic fan control. “fanduty 0” turns the fan off. “autofan” switches back to automated control. **hcdebug** - Display the commands that the host sends to the EC, in varying levels of detail (see include/ec_commands.h for the data structures). ## Host commands The way in which messages are exchanged between the AP and EC is [documented separately](./docs/ap-ec-comm.md). ## Software Features ### Tasks Most code run on the EC after initialization is run in the context of a task (with the rest in interrupt handlers). Each task has a fixed stack size and there is no heap (malloc). All variable storage must be explicitly declared at build-time. The EC (and system) will reboot if any task has a stack overflow. Tasks typically have a top-level loop with a call to task_wait_event() or usleep() to set a delay in uSec before continuing. A watchdog will trigger if a task runs for too long. The watchdog timeout varies by EC chip and the clock speed the EC is running at. The list of tasks for a board is specified in ec.tasklist in the `board/$BOARD/` sub-directory. Tasks are listed in priority order with the lowest priority task listed first. A task runs until it exits its main function or puts itself to sleep. The highest priority task that wants to run is scheduled next. Tasks can be preempted at any time by an interrupt and resumed after the handler is finished. The console `taskinfo` command will print run-time stats on each task: ``` > taskinfo Task Ready Name Events Time (s) StkUsed 0 R << idle >> 00000000 32.975554 196/256 1 R HOOKS 00000000 0.007835 192/488 2 VBOOTHASH 00000000 0.042818 392/488 3 POWERLED 00000000 0.000096 120/256 4 CHARGER 00000000 0.029050 392/488 5 CHIPSET 00000000 0.017558 400/488 6 HOSTCMD 00000000 0.379277 328/488 7 R CONSOLE 00000000 0.042050 348/640 8 KEYSCAN 00000000 0.002988 292/488 ``` The `StkUsed` column reports the largest size the stack for each task grew since reset (or sysjump). ### Hooks Hooks allow you to register a function to be run when specific events occur; such as the host suspending or external power being applied: ``` DECLARE_HOOK(HOOK_AC_CHANGE, ac_change_callback, HOOK_PRIO_DEFAULT); ``` Registered functions are run in the HOOKS task. Registered functions are called in priority order if more than one callback needs to be run. There are also hooks for running functions periodically: `HOOK_TICK` (fires every `HOOK_TICK_INVERVAL` ms which varies by EC chip) and `HOOK_SECOND`. See hook_type in [include/hooks.h](https://chromium.googlesource.com/chromiumos/platform/ec/+/main/include/hooks.h) for a complete list. ### Deferred Functions Deferred functions allow you to call a function after a delay specified in uSec without blocking. Deferred functions run in the HOOKS task. Here is an example of an interrupt handler. The deferred function allows the handler itself to be lightweight. Delaying the deferred call by 30 mSec also allows the interrupt to be debounced. ``` static int debounced_gpio_state; static void some_interrupt_deferred(void) { int gpio_state = gpio_get_level(GPIO_SOME_SIGNAL); if (gpio_state == debounced_gpio_state) return; debounced_gpio_state = gpio_state; dispense_sandwich(); /* Or some other useful action. */ } /* A function must be explicitly declared as being deferrable. */ DECLARE_DEFERRED(some_interrupt_deferred); void some_interrupt(enum gpio_signal signal) { hook_call_deferred(some_interrupt_deferred, 30 * MSEC); } ``` ### Shared Memory Buffer While there is no heap, there is a shared memory buffer that can be borrowed temporarily (ideally before a context switch). The size of the buffer depends on the EC chip being used. The buffer can only be used by one task at a time. See [common/shared_mem.c](https://chromium.googlesource.com/chromiumos/platform/ec/+/main/common/shared_mem.c) for more information. At present (May 2014), this buffer is only used by debug commands. ## Making Code Changes If you see a bug or want to make an improvement to the EC code please file an issue at [crbug.com/new](http://crbug.com/new). It's best to discuss the change you want to make first on an issue report to make sure the EC maintainers are on-board before digging into the fun part (writing code). In general, make more, smaller changes that solve single problems rather than bigger changes that solve multiple problems. Smaller changes are easier and faster to review. When changing common code shared between boards along with board specific code, please split the shared code change into its own change list (CL). The board specific CL can depend on the shared code CL. ### Coding style The EC code follows the [Linux Kernel style guide](https://www.kernel.org/doc/html/latest/process/coding-style.html). Please adopt the same style used in the existing code. Use tabs, not spaces, 80 column lines etc... Other style notes: 1. Globals should either be `static` or `const`. Use them for persistent state within a file or for constant data (such as the GPIO list in board.c). Do not use globals to pass information between modules without accessors. For module scope, accessors are not needed. 1. If you add a new `#define` config option to the code, please document it in [include/config.h](https://chromium.googlesource.com/chromiumos/platform/ec/+/main/include/config.h) with an `#undef` statement and descriptive comment. 1. The Chromium copyright header must be included at the top of new files in all contributions to the Chromium project: ``` /* Copyright The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ ``` ### Submitting changes Prior to uploading a new change for review, please run the EC unit tests with: ```bash (chroot) $ make -j buildall ``` ```bash (chroot) $ make -j tests ``` These commands will build and run unit tests in an emulator on your host. Pre-upload checks are run when you try to upload a change-list. If you wish to run these checks manually first, commit your change locally then run the following command from within the chroot and while in the `src/platform/ec` directory: ```bash (chroot) $ ~/trunk/src/repohooks/pre-upload.py ``` The pre-upload checks include checking the commit message. Commit messages must have a `BUG` and `TEST`. You may also optionally include a `BRANCH` line with a list of board names for which the CL should be cherry-picked back to old branches for. Please refer to existing commits (`git log`) to see the proper format for the commit message. Note that code you submit must adhere to the [ChromeOS EC Firmware Test Requirements]. ## Debugging While adding `printf` statements can be handy, there are some other options for debugging problems during development. ### Serial Console There may already be a message on the serial console that indicates your problem. If you don’t have a servo connected, the `ectool console` command will show the current contents of the console buffer (the buffer’s size varies by EC chip). This log persists across warm resets of the host but is cleared if the EC resets. The `ectool console` command will only work when the EC is not write protected. If you have interactive access to the serial console via servo, you can use the read word `rw` and write word `ww` commands to peek and poke the EC's RAM. You may need to refer to the datasheet for your EC chip or the disassembled code to find the memory address you need. There are other handy commands on the serial console to read temperatures, view the state of tasks (taskinfo) which may help. Type `help` for a list. ### Panicinfo The EC may save panic data which persists across resets. Use the “`ectool panicinfo`” command or console “`panicinfo`” command to view the saved data: ``` Saved panic data: (NEW) === HANDLER EXCEPTION: 05 ====== xPSR: 6100001e === r0 :00000001 r1 :00000f15 r2 :4003800c r3 :000000ff r4 :ffffffed r5 :00000799 r6 :0000f370 r7 :00000000 r8 :00000001 r9 :00000003 r10:20002fe0 r11:00000000 r12:00000008 sp :20000fd8 lr :000012e1 pc :0000105e ``` The most interesting information are the program counter (`pc`) and the link register (return address, `lr`) as they give you an indication of what code the EC was running when the panic occurred. `HANDLER EXCEPTIONS` indicate the panic occurred while servicing an interrupt. `PROCESS EXCEPTIONS` occur in regular tasks. If you see “Imprecise data bus error” listed, the program counter value is incorrect as the panic occurred when flushing a write buffer. If using a cortex-m based EC, add `CONFIG_DEBUG_DISABLE_WRITE_BUFFER` to your board.h to disable write buffering (with a performance hit) to get a “Precise bus error” with an accurate program counter value. ### Assembly Code If you have a program counter address you need to make sense of, you can generate the assembly code for the EC by checking out the code at the matching commit for your binary (`ectool version`) and running: ```bash (chroot) $ make BOARD=$board dis ``` This outputs two files with assembly code: ``` build/$board/RO/ec.RO.dis build/$board/RW/ec.RW.dis ``` which (in the case of the LM4 and STM32) are essentially the same, but the RW addresses are offset. ## Write Protect See [Firmware Write Protection]. ## EC Version Strings The read-only and read-write sections of the EC firmware each have a version string. This string tells you the branch and last change at which the firmware was built. On a running machine, run `ectool version` from a shell to see version information: ``` RO version: peppy_v1.5.103-7abb4f7 RW version: peppy_v1.5.129-cd1a1e9 Firmware copy: RW Build info: peppy_v1.5.129-cd1a1e9 2014-03-07 17:18:27 @build120-m2 ``` You can also run the `version` command on the EC serial console for a similar output. The format of the version string is: ``` _.- ``` If the version is: `rambi_v1.6.68-a6608c8`: * board name = rambi * branch number = v1.6 (which is for the firmware-rambi branch) * number of commits on this branch (since the tag was added) = 68 * latest git hash = a6608c8 The branch numbers (as of May 2014) are: * v1.0.0 cros/main * v1.1.0 cros/main * v1.2.0 cros/firmware-link-2695.2.B * v1.3.0 cros/firmware-snow-2695.90.B * v1.4.0 cros/firmware-skate-3824.129.B * v1.5.0 cros/firmware-4389.71.B * v1.6.0 cros/firmware-rambi-5216.B Hack command to check the branch tags: ``` git tag for hash in $(git for-each-ref --format='%(objectname)' refs/tags/); do git branch -a --contains $hash | head -1; done ``` (If anyone can come up with something prettier, make a CL). Run `util/getversion.sh` to see the current version string. The board name is passed as an environment variable `BOARD`: ```bash (chroot) $ BOARD="cheese" ./util/getversion.sh ``` ``` cheese_v1.1.1755-4da9520 ``` [Firmware Write Protection]: ./docs/write_protection.md ## CQ builder To test the cq builder script run these commands: ### firmware-ec-cq ``` rm -rf /tmp/artifact_bundles /tmp/artifact_bundle_metadata \ ~/chromiumos/src/platform/ec/build ./firmware_builder.py --metrics /tmp/metrics_build build && \ ./firmware_builder.py --metrics /tmp/metrics_test test && \ ./firmware_builder.py --metrics /tmp/metrics_bundle bundle && \ echo PASSED cat /tmp/artifact_bundle_metadata cat /tmp/metrics_build ls -l /tmp/artifact_bundles/ ``` [ChromeOS EC Firmware Test Requirements]: ./docs/chromeos-ec-firmware-test-requirements.md