/* Copyright 2019 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Hatch baseboard configuration */

#ifndef __CROS_EC_BASEBOARD_H
#define __CROS_EC_BASEBOARD_H

/* NPCX7 config */
#define NPCX7_PWM1_SEL    0  /* GPIO C2 is not used as PWM1. */
#define NPCX_UART_MODULE2 1  /* GPIO64/65 are used as UART pins. */
/* Internal SPI flash on NPCX796FC is 512 kB */
#define CONFIG_FLASH_SIZE (512 * 1024)
#define CONFIG_SPI_FLASH_REGS
#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */
#define CONFIG_I2C

/* EC Defines */
#define CONFIG_ADC
#define CONFIG_BOARD_VERSION_CBI
#define CONFIG_CRC8
#define CONFIG_CROS_BOARD_INFO
#define CONFIG_DPTF
#define CONFIG_HIBERNATE_PSL
#define CONFIG_PWM
#define CONFIG_VBOOT_HASH
#define CONFIG_VSTORE
#define CONFIG_VSTORE_SLOT_COUNT 1

/* Chipset config */
#define CONFIG_CHIPSET_COMETLAKE
#define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK
#define CONFIG_CHIPSET_RESET_HOOK
#define CONFIG_CPU_PROCHOT_ACTIVE_LOW
#define CONFIG_EXTPOWER_GPIO
#define CONFIG_POWER_BUTTON
#define CONFIG_POWER_BUTTON_X86
#define CONFIG_POWER_COMMON
#define CONFIG_POWER_PP5000_CONTROL
#define CONFIG_POWER_S0IX
#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE

/* Common Keyboard Defines */
#define CONFIG_CMD_KEYBOARD
#define CONFIG_KEYBOARD_BOARD_CONFIG
#define CONFIG_KEYBOARD_COL2_INVERTED
#define CONFIG_KEYBOARD_KEYPAD
#define CONFIG_KEYBOARD_PROTOCOL_8042
#define CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI2

/* Sensors */
#define CONFIG_MKBP_EVENT
#define CONFIG_MKBP_USE_GPIO
#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
/* I2C_PORT_ACCEL needs to be defined for i2c transactions */
#define I2C_PORT_ACCEL I2C_PORT_SENSOR

/* FIFO size is in power of 2. */
#define CONFIG_ACCEL_FIFO 256
/* Depends on how fast the AP boots and typical ODRs */
#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO / 3)

/* Sensor console commands */
#define CONFIG_CMD_ACCELS
#define CONFIG_CMD_ACCEL_INFO

/* Common charger defines */
#define CONFIG_CHARGE_MANAGER
#define CONFIG_CHARGER
#define CONFIG_CHARGER_BQ25710
#define CONFIG_CHARGER_DISCHARGE_ON_AC
#define CONFIG_CHARGER_INPUT_CURRENT 512 /* Allow low-current USB charging */
#define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON 1
#define CONFIG_CHARGER_NARROW_VDC
#define CONFIG_CHARGER_SENSE_RESISTOR 10
#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
#define CONFIG_CHARGER_V2

/* Common battery defines */
#define CONFIG_BATTERY_CUT_OFF
#define CONFIG_BATTERY_DEVICE_CHEMISTRY  "LION"
#define CONFIG_BATTERY_FUEL_GAUGE
#define CONFIG_BATTERY_HW_PRESENT_CUSTOM
#define CONFIG_BATTERY_PRESENT_CUSTOM
#define CONFIG_BATTERY_REVIVE_DISCONNECT
#define CONFIG_BATTERY_SMART
#undef  CONFIG_BATT_HOST_FULL_FACTOR
#define CONFIG_BATT_HOST_FULL_FACTOR	100

/* USB Type C and USB PD defines */
#define CONFIG_USB_POWER_DELIVERY
#define CONFIG_USB_PD_PORT_COUNT 2
#define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0
#define CONFIG_USB_PD_TCPC_LOW_POWER
#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
#define CONFIG_USB_PD_TCPM_ANX7447
#define CONFIG_USB_PD_TCPM_PS8751
#define CONFIG_USB_PD_DUAL_ROLE
#define CONFIG_USB_PD_LOGGING
#define CONFIG_USB_PD_ALT_MODE
#define CONFIG_USB_PD_ALT_MODE_DFP
#define CONFIG_USB_PD_DISCHARGE_PPC
#define CONFIG_USB_PD_TRY_SRC
#define CONFIG_USB_PD_VBUS_DETECT_PPC
#define CONFIG_USB_PD_TCPM_TCPCI
#define CONFIG_USBC_PPC_SN5S330
#define CONFIG_USBC_PPC_VCONN
#define CONFIG_USBC_SS_MUX
#define CONFIG_USB_PD_TCPM_MUX
#define CONFIG_USBC_VCONN
#define CONFIG_USBC_VCONN_SWAP

#define CONFIG_CMD_PD_CONTROL
#define CONFIG_CMD_PPC_DUMP

/* BC 1.2 */
#define CONFIG_USB_CHARGER
#define CONFIG_BC12_DETECT_PI3USB9201

/* Common Sensor Defines */
#define CONFIG_TABLET_MODE

/* USB Type A Features */
#define CONFIG_USB_PORT_POWER_SMART
#undef CONFIG_USB_PORT_POWER_SMART_PORT_COUNT
#define CONFIG_USB_PORT_POWER_SMART_PORT_COUNT 1
#define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY
#define GPIO_USB1_ILIM_SEL GPIO_EN_USB_A_LOW_PWR_OD

/* TODO(b/122273953): Use correct PD delay values */
#define PD_POWER_SUPPLY_TURN_ON_DELAY	30000	/* us */
#define PD_POWER_SUPPLY_TURN_OFF_DELAY	250000	/* us */
#define PD_VCONN_SWAP_DELAY		5000	/* us */

/* TODO(b/122273953): Use correct PD power values */
#define PD_OPERATING_POWER_MW	15000
#define PD_MAX_POWER_MW		60000
#define PD_MAX_CURRENT_MA	3000
#define PD_MAX_VOLTAGE_MV	20000

/* I2C Bus Configuration */
#define CONFIG_I2C
#define CONFIG_I2C_MASTER
#define I2C_PORT_SENSOR		NPCX_I2C_PORT0_0
#define I2C_PORT_PPC0		NPCX_I2C_PORT1_0
#define I2C_PORT_TCPC1		NPCX_I2C_PORT2_0
#define I2C_PORT_TCPC0		NPCX_I2C_PORT3_0
#define I2C_PORT_POWER		NPCX_I2C_PORT5_0
#define I2C_PORT_EEPROM		NPCX_I2C_PORT7_0
#define I2C_ADDR_EEPROM		0xA0
#define I2C_PORT_BATTERY	I2C_PORT_POWER
#define I2C_PORT_CHARGER	I2C_PORT_POWER

#define PP5000_PGOOD_POWER_SIGNAL_MASK POWER_SIGNAL_MASK(PP5000_A_PGOOD)

#ifndef __ASSEMBLER__

enum power_signal {
	X86_SLP_S0_DEASSERTED,
	X86_SLP_S3_DEASSERTED,
	X86_SLP_S4_DEASSERTED,
	X86_RSMRST_L_PGOOD,
	PP5000_A_PGOOD,
	ALL_SYS_PGOOD,
	/* Number of X86 signals */
	POWER_SIGNAL_COUNT
};

enum mst_source {
	MST_TYPE_C0,
	MST_TYPE_C1,
	MST_HDMI,
};

/* Forward declare common (within Hatch) board-specific functions */
void board_reset_pd_mcu(void);
void baseboard_mst_enable_control(enum mst_source, int level);

#endif /* !__ASSEMBLER__ */

#endif /* __CROS_EC_BASEBOARD_H */