/* Copyright 2019 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ /* Shared USB-C policy for Hatch boards */ #include "charge_manager.h" #include "common.h" #include "compile_time_macros.h" #include "console.h" #include "ec_commands.h" #include "gpio.h" #include "system.h" #include "tcpm/tcpci.h" #include "tcpm/tcpm.h" #include "usb_mux.h" #include "usb_pd.h" #include "usbc_ppc.h" #include "util.h" #define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) #define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) int pd_check_vconn_swap(int port) { /* Only allow vconn swap if pp5000_A rail is enabled */ return gpio_get_level(GPIO_EN_PP5000_A); } void pd_power_supply_reset(int port) { int prev_en; prev_en = ppc_is_sourcing_vbus(port); /* Disable VBUS. */ ppc_vbus_source_enable(port, 0); /* Enable discharge if we were previously sourcing 5V */ if (prev_en) pd_set_vbus_discharge(port, 1); #ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT /* Give back the current quota we are no longer using */ charge_manager_source_port(port, 0); #endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ /* Notify host of power info change. */ pd_send_host_event(PD_EVENT_POWER_CHANGE); } int pd_set_power_supply_ready(int port) { int rv; /* Disable charging. */ rv = ppc_vbus_sink_enable(port, 0); if (rv) return rv; pd_set_vbus_discharge(port, 0); /* Provide Vbus. */ rv = ppc_vbus_source_enable(port, 1); if (rv) return rv; #ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT /* Ensure we advertise the proper available current quota */ charge_manager_source_port(port, 1); #endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ /* Notify host of power info change. */ pd_send_host_event(PD_EVENT_POWER_CHANGE); return EC_SUCCESS; } #ifdef CONFIG_USB_PD_VBUS_DETECT_PPC int pd_snk_is_vbus_provided(int port) { return ppc_is_vbus_present(port); } #endif int board_vbus_source_enabled(int port) { return ppc_is_sourcing_vbus(port); }