/* Copyright 2020 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Nucleo-H743ZI baseboard configuration */

#ifndef __CROS_EC_BASE_BOARD_H
#define __CROS_EC_BASE_BOARD_H

/*
 * Flash layout:
 *
 * +++++++++++++
 * |    RO     | Bank 1
 * |           |
 * |           |
 * | ......... |
 * |  Rollback | (last two sectors)
 * +-----------+
 * |    RW     | Bank 2
 * |           |
 * |           |
 * |           |
 * |           |
 * +++++++++++++
 *
 * We adjust the following macros to accommodate a rollback region
 * and RO/RW regions of different sizes.
 */

#undef _IMAGE_SIZE
#undef CONFIG_ROLLBACK_OFF
#undef CONFIG_ROLLBACK_SIZE
#undef CONFIG_FLASH_PSTATE
#undef CONFIG_FW_PSTATE_SIZE
#undef CONFIG_FW_PSTATE_OFF
#undef CONFIG_RO_MEM_OFF
#undef CONFIG_RO_STORAGE_OFF
#undef CONFIG_RO_SIZE
#undef CONFIG_RW_MEM_OFF
#undef CONFIG_RW_STORAGE_OFF
#undef CONFIG_RW_SIZE
#undef CONFIG_EC_PROTECTED_STORAGE_OFF
#undef CONFIG_EC_PROTECTED_STORAGE_SIZE
#undef CONFIG_EC_WRITABLE_STORAGE_OFF
#undef CONFIG_EC_WRITABLE_STORAGE_SIZE
#undef CONFIG_WP_STORAGE_OFF
#undef CONFIG_WP_STORAGE_SIZE

/*
 * EC rollback protection block
 *
 * We need 2 independently erasable blocks, at a minimum.
 */
#define CONFIG_ROLLBACK_SIZE   (2 * CONFIG_FLASH_BANK_SIZE)
#define CONFIG_ROLLBACK_OFF    ((CONFIG_FLASH_SIZE_BYTES / 2) - \
				CONFIG_ROLLBACK_SIZE)

#define CONFIG_RO_MEM_OFF      0
#define CONFIG_RO_SIZE         CONFIG_ROLLBACK_OFF
#define CONFIG_RW_MEM_OFF      (CONFIG_FLASH_SIZE_BYTES / 2)
#define CONFIG_RW_SIZE         (CONFIG_FLASH_SIZE_BYTES / 2)

#define CONFIG_RO_STORAGE_OFF  0
#define CONFIG_RW_STORAGE_OFF  0

#define CONFIG_EC_PROTECTED_STORAGE_OFF   CONFIG_RO_MEM_OFF
#define CONFIG_EC_PROTECTED_STORAGE_SIZE  CONFIG_RO_SIZE
#define CONFIG_EC_WRITABLE_STORAGE_OFF    CONFIG_RW_MEM_OFF
#define CONFIG_EC_WRITABLE_STORAGE_SIZE   CONFIG_RW_SIZE

#define CONFIG_WP_STORAGE_OFF             CONFIG_EC_PROTECTED_STORAGE_OFF
#define CONFIG_WP_STORAGE_SIZE            CONFIG_EC_PROTECTED_STORAGE_SIZE

/* Disabled features */

#undef CONFIG_ADC
#undef CONFIG_HIBERNATE
#undef CONFIG_I2C
#undef CONFIG_LID_SWITCH
#undef CONFIG_TASK_PROFILING

/* Enabled features */

#define CONFIG_AES
#define CONFIG_AES_GCM
#define CONFIG_DMA
#define CONFIG_FORCE_CONSOLE_RESUME
#define CONFIG_FPU
#define CONFIG_HOST_COMMAND_STATUS
#define CONFIG_LOW_POWER_IDLE
#define CONFIG_MKBP_EVENT
#define CONFIG_MKBP_USE_GPIO
#define CONFIG_PRINTF_LEGACY_LI_FORMAT
#define CONFIG_RNG
#define CONFIG_RWSIG_TYPE_RWSIG
#define CONFIG_SHA256
#define CONFIG_SHA256_UNROLLED
#undef CONFIG_SHAREDLIB_SIZE
#define CONFIG_SHAREDLIB_SIZE   0
#define CONFIG_STM_HWTIMER32
#define CONFIG_WATCHDOG_HELP
#define CONFIG_WP_ACTIVE_HIGH

#ifndef TEST_BUILD
	/* TODO(hesling): Fix the illogical dependency between spi.c
	 *                and host_command.c
	 *
	 * Currently, the chip/stm32/spi.c depends on functions defined in
	 * common/host_command.c. When unit test builds use their own tasklist
	 * without the HOSTCMD task, host_command.c is excluded from the build,
	 * but chip/stm32/spi.c remains (because of CONFIG_SPI).
	 * This triggers an undefined reference linker error.
	 * The reproduce case:
	 * - Allow CONFIG_SPI in TEST_BUILDs
	 * - make BOARD=nucleo-h743zi tests
	 */
#	define CONFIG_SPI
#endif

/*
 * We want to prevent flash readout, and use it as indicator of protection
 * status.
 */
#define CONFIG_FLASH_READOUT_PROTECTION_AS_PSTATE

/*
 * RW does slow compute, RO does slow flash erase.
 */
#undef CONFIG_WATCHDOG_PERIOD_MS
#define CONFIG_WATCHDOG_PERIOD_MS 10000

/* Setup UART console */

#undef CONFIG_UART_CONSOLE
#define CONFIG_UART_CONSOLE 3 /* The UART console is on USART3 */
#define CONFIG_UART_TX_DMA
#define CONFIG_UART_TX_DMA_PH DMAMUX1_REQ_USART3_TX
#undef CONFIG_UART_TX_BUF_SIZE
#define CONFIG_UART_TX_BUF_SIZE 2048

/* Console commands */

#define CONFIG_CMD_FLASH
#define CONFIG_CMD_IDLE_STATS

#ifdef SECTION_IS_RO
	/* RO verifies the RW partition signature */
#	define CONFIG_RSA
#	define CONFIG_RWSIG
#endif  /* SECTION_IS_RO */

#define CONFIG_RSA_KEY_SIZE 3072
#define CONFIG_RSA_EXPONENT_3

/*
 * We do not use any "locally" generated entropy: this is normally used
 * to add local entropy when the main source of entropy is remote.
 */
#undef CONFIG_ROLLBACK_SECRET_LOCAL_ENTROPY_SIZE
#ifdef SECTION_IS_RW
#	undef CONFIG_ROLLBACK_UPDATE
#endif
/*
 * Add rollback protection
 */
#define CONFIG_ROLLBACK
#define CONFIG_ROLLBACK_MPU_PROTECT

#ifndef __ASSEMBLER__
	/* Timer selection */
#	define TIM_CLOCK32 2
#	define TIM_WATCHDOG 16
#	include "gpio_signal.h"
	void button_event(enum gpio_signal signal);
#endif /* !__ASSEMBLER__ */

#endif /* __CROS_EC_BASE_BOARD_H */