/* Copyright 2019 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Volteer family-specific configuration */
#include "gpio.h"
#include "i2c.h"

/******************************************************************************/
/* Wake up pins */
const enum gpio_signal hibernate_wake_pins[] = {
};
const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins);

/******************************************************************************/
/* I2C port map configuration */
const struct i2c_port_t i2c_ports[] = {
	{
		.name = "sensor",
		.port = I2C_PORT_SENSOR,
		.kbps = 400,
		.scl = GPIO_EC_I2C0_SENSOR_SCL,
		.sda = GPIO_EC_I2C0_SENSOR_SDA,
	},
	{
		.name = "usb_c0",
		.port = I2C_PORT_USB_C0,
		/* TODO: design supports 1 MHz, set to 100 KHz for bringup */
		.kbps = 100,
		.scl = GPIO_EC_I2C1_USB_C0_SCL,
		.sda = GPIO_EC_I2C1_USB_C0_SDA,
	},
	{
		.name = "usb_c1",
		.port = I2C_PORT_USB_C1,
		/* TODO: design supports 1 MHz, set to 100 KHz for bringup */
		.kbps = 100,
		.scl = GPIO_EC_I2C2_USB_C1_SCL,
		.sda = GPIO_EC_I2C2_USB_C1_SDA,
	},
	{
		.name = "usb_1_mix",
		.port = I2C_PORT_USB_1_MIX,
		.kbps = 100,
		.scl = GPIO_EC_I2C3_USB_1_MIX_SCL,
		.sda = GPIO_EC_I2C3_USB_1_MIX_SDA,
	},
	{
		.name = "power",
		.port = I2C_PORT_POWER,
		.kbps = 400,
		.scl = GPIO_EC_I2C5_POWER_SCL,
		.sda = GPIO_EC_I2C5_POWER_SDA,
	},
	{
		.name = "eeprom",
		.port = I2C_PORT_EEPROM,
		.kbps = 400,
		.scl = GPIO_EC_I2C7_EEPROM_SCL,
		.sda = GPIO_EC_I2C7_EEPROM_SDA,
	},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);