/* Copyright 2021 The ChromiumOS Authors
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Volteer board-specific configuration */
#include "button.h"
#include "common.h"
#include "accelgyro.h"
#include "cbi_ec_fw_config.h"
#include "driver/accel_bma2x2.h"
#include "driver/accelgyro_bmi160.h"
#include "driver/bc12/pi3usb9201.h"
#include "driver/ppc/syv682x.h"
#include "driver/tcpm/ps8xxx.h"
#include "driver/tcpm/tcpci.h"
#include "driver/sync.h"
#include "extpower.h"
#include "fan.h"
#include "fan_chip.h"
#include "gpio.h"
#include "hooks.h"
#include "keyboard_scan.h"
#include "lid_switch.h"
#include "power.h"
#include "power_button.h"
#include "pwm.h"
#include "pwm_chip.h"
#include "switch.h"
#include "system.h"
#include "task.h"
#include "tablet_mode.h"
#include "throttle_ap.h"
#include "uart.h"
#include "usb_mux.h"
#include "usb_pd.h"
#include "usb_pd_tbt.h"
#include "usb_pd_tcpm.h"
#include "usbc_ppc.h"
#include "util.h"

#include "gpio_list.h" /* Must come after other header files. */

#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ##args)

/* Keyboard scan setting */
__override struct keyboard_scan_config keyscan_config = {
	/* Increase from 50 us, because KSO_02 passes through the H1. */
	.output_settle_us = 80,
	/* Other values should be the same as the default configuration. */
	.debounce_down_us = 9 * MSEC,
	.debounce_up_us = 30 * MSEC,
	.scan_period_us = 3 * MSEC,
	.min_post_scan_delay_us = 1000,
	.poll_timeout_us = 100 * MSEC,
	.actual_key_mask = {
		0x1c, 0xfe, 0xff, 0xff, 0xff, 0xf5, 0xff,
		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
	},
};

static const struct ec_response_keybd_config copano_kb = {
	.num_top_row_keys = 10,
	.action_keys = {
		TK_BACK,		/* T1 */
		TK_REFRESH,		/* T2 */
		TK_FULLSCREEN,		/* T3 */
		TK_OVERVIEW,		/* T4 */
		TK_SNAPSHOT,		/* T5 */
		TK_BRIGHTNESS_DOWN,	/* T6 */
		TK_BRIGHTNESS_UP,	/* T7 */
		TK_VOL_MUTE,		/* T8 */
		TK_VOL_DOWN,		/* T9 */
		TK_VOL_UP,		/* T10 */
	},
	.capabilities = KEYBD_CAP_SCRNLOCK_KEY,
};

__override const struct ec_response_keybd_config *
board_vivaldi_keybd_config(void)
{
	return &copano_kb;
}

/******************************************************************************/
/*
 * FW_CONFIG defaults for Terrador if the CBI data is not initialized.
 */
union volteer_cbi_fw_config fw_config_defaults = {
	.usb_db = DB_USB3_ACTIVE,
};

static void board_init(void)
{
}
DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);

/******************************************************************************/
/* I2C port map configuration */
const struct i2c_port_t i2c_ports[] = {
	{
		.name = "sensor",
		.port = I2C_PORT_SENSOR,
		.kbps = 400,
		.scl = GPIO_EC_I2C0_SENSOR_SCL,
		.sda = GPIO_EC_I2C0_SENSOR_SDA,
	},
	{
		.name = "usb_c0",
		.port = I2C_PORT_USB_C0,
		.kbps = 1000,
		.scl = GPIO_EC_I2C1_USB_C0_SCL,
		.sda = GPIO_EC_I2C1_USB_C0_SDA,
	},
	{
		.name = "usb_c1",
		.port = I2C_PORT_USB_C1,
		.kbps = 1000,
		.scl = GPIO_EC_I2C2_USB_C1_SCL,
		.sda = GPIO_EC_I2C2_USB_C1_SDA,
	},
	{
		.name = "usb_0_mix",
		.port = I2C_PORT_USB_0_MIX,
		.kbps = 100,
		.scl = GPIO_EC_I2C3_USB_0_MIX_SCL,
		.sda = GPIO_EC_I2C3_USB_0_MIX_SDA,
	},
	{
		.name = "usb_1_mix",
		.port = I2C_PORT_USB_1_MIX,
		.kbps = 100,
		.scl = GPIO_EC_I2C4_USB_1_MIX_SCL,
		.sda = GPIO_EC_I2C4_USB_1_MIX_SDA,
	},
	{
		.name = "power",
		.port = I2C_PORT_POWER,
		.kbps = 100,
		.scl = GPIO_EC_I2C5_POWER_SCL,
		.sda = GPIO_EC_I2C5_POWER_SDA,
	},
	{
		.name = "eeprom",
		.port = I2C_PORT_EEPROM,
		.kbps = 400,
		.scl = GPIO_EC_I2C7_EEPROM_SCL,
		.sda = GPIO_EC_I2C7_EEPROM_SDA,
	},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);

/******************************************************************************/
/* PWM configuration */
const struct pwm_t pwm_channels[] = {
	[PWM_CH_KBLIGHT] = {
		.channel = 3,
		.flags = 0,
		/*
		 * Set PWM frequency to multiple of 50 Hz and 60 Hz to prevent
		 * flicker. Higher frequencies consume similar average power to
		 * lower PWM frequencies, but higher frequencies record a much
		 * lower maximum power.
		 */
		.freq = 10000,
	},
};
BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);

/******************************************************************************/
/* EC thermal management configuration */

/*
 * Tiger Lake specifies 100 C as maximum TDP temperature.  THRMTRIP# occurs at
 * 130 C.  However, sensor is located next to DDR, so we need to use the lower
 * DDR temperature limit (85 C)
 */
/*
 * TODO(b/202062363): Remove when clang is fixed.
 */
#define THERMAL_CPU              \
	{                        \
		.temp_host = { \
			[EC_TEMP_THRESH_HIGH] = C_TO_K(70), \
			[EC_TEMP_THRESH_HALT] = C_TO_K(80), \
		}, \
		.temp_host_release = { \
			[EC_TEMP_THRESH_HIGH] = C_TO_K(65), \
		}, \
		.temp_fan_off = C_TO_K(35), \
		.temp_fan_max = C_TO_K(50), \
	}
__maybe_unused static const struct ec_thermal_config thermal_cpu = THERMAL_CPU;

/*
 * Inductor limits - used for both charger and PP3300 regulator
 *
 * Need to use the lower of the charger IC, PP3300 regulator, and the inductors
 *
 * Charger max recommended temperature 100C, max absolute temperature 125C
 * PP3300 regulator: operating range -40 C to 145 C
 *
 * Inductors: limit of 125c
 * PCB: limit is 80c
 */
/*
 * TODO(b/202062363): Remove when clang is fixed.
 */
#define THERMAL_INDUCTOR         \
	{                        \
		.temp_host = { \
			[EC_TEMP_THRESH_HIGH] = C_TO_K(75), \
			[EC_TEMP_THRESH_HALT] = C_TO_K(80), \
		}, \
		.temp_host_release = { \
			[EC_TEMP_THRESH_HIGH] = C_TO_K(65), \
		}, \
		.temp_fan_off = C_TO_K(40), \
		.temp_fan_max = C_TO_K(55), \
	}
__maybe_unused static const struct ec_thermal_config thermal_inductor =
	THERMAL_INDUCTOR;

struct ec_thermal_config thermal_params[] = {
	[TEMP_SENSOR_1_CHARGER] = THERMAL_INDUCTOR,
	[TEMP_SENSOR_2_PP3300_REGULATOR] = THERMAL_INDUCTOR,
	[TEMP_SENSOR_3_DDR_SOC] = THERMAL_CPU,
	[TEMP_SENSOR_4_FAN] = THERMAL_CPU,
};
BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);

/******************************************************************************/

static void kb_backlight_enable(void)
{
	gpio_set_level(GPIO_EC_KB_BL_EN, 1);
}
DECLARE_HOOK(HOOK_CHIPSET_RESUME, kb_backlight_enable, HOOK_PRIO_DEFAULT);

static void kb_backlight_disable(void)
{
	gpio_set_level(GPIO_EC_KB_BL_EN, 0);
}
DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, kb_backlight_disable, HOOK_PRIO_DEFAULT);

/*****************************************************************************/
/* USBC PPC configuration */
struct ppc_config_t ppc_chips[] = {
	[USBC_PORT_C0] = {
		.i2c_port = I2C_PORT_USB_C0,
		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
		.drv = &syv682x_drv,
	},
	[USBC_PORT_C1] = {
		.i2c_port = I2C_PORT_USB_C1,
		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
		.drv = &syv682x_drv,
	},
};
BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT);
unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);

/******************************************************************************/
/* PPC support routines */
void ppc_interrupt(enum gpio_signal signal)
{
	switch (signal) {
	case GPIO_USB_C0_PPC_INT_ODL:
		syv682x_interrupt(USBC_PORT_C0);
		break;
	case GPIO_USB_C1_PPC_INT_ODL:
		syv682x_interrupt(USBC_PORT_C1);
	default:
		break;
	}
}

/******************************************************************************/
/* BC1.2 charger detect configuration */
const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
	[USBC_PORT_C0] = {
		.i2c_port = I2C_PORT_USB_C0,
		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
	},
	[USBC_PORT_C1] = {
		.i2c_port = I2C_PORT_USB_C1,
		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
	},
};
BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT);

/******************************************************************************/
/* USBC TCPC configuration */
const struct tcpc_config_t tcpc_config[] = {
	[USBC_PORT_C0] = {
		.bus_type = EC_BUS_TYPE_I2C,
		.i2c_info = {
			.port = I2C_PORT_USB_C0,
			.addr_flags = PS8XXX_I2C_ADDR1_FLAGS,
		},
		.flags = TCPC_FLAGS_TCPCI_REV2_0 |
			TCPC_FLAGS_TCPCI_REV2_0_NO_VSAFE0V,
		.drv = &ps8xxx_tcpm_drv,
	},
	[USBC_PORT_C1] = {
		.bus_type = EC_BUS_TYPE_I2C,
		.i2c_info = {
			.port = I2C_PORT_USB_C1,
			.addr_flags = PS8XXX_I2C_ADDR1_FLAGS,
		},
		.flags = TCPC_FLAGS_TCPCI_REV2_0 |
			TCPC_FLAGS_TCPCI_REV2_0_NO_VSAFE0V,
		.drv = &ps8xxx_tcpm_drv,
	},
};
BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT);
BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT);

/******************************************************************************/
/* USBC mux configuration - Tiger Lake includes internal mux */
static const struct usb_mux_chain usbc0_usb3_mb_retimer = {
	.mux =
		&(const struct usb_mux){
			.usb_port = USBC_PORT_C0,
			.driver = &tcpci_tcpm_usb_mux_driver,
			.hpd_update = &ps8xxx_tcpc_update_hpd_status,
		},
	.next = NULL,
};

static const struct usb_mux_chain usbc1_usb3_db_retimer = {
	.mux =
		&(const struct usb_mux){
			.usb_port = USBC_PORT_C1,
			.driver = &tcpci_tcpm_usb_mux_driver,
			.hpd_update = &ps8xxx_tcpc_update_hpd_status,
		},
	.next = NULL,
};

const struct usb_mux_chain usb_muxes[] = {
	[USBC_PORT_C0] = {
		.mux = &(const struct usb_mux) {
			.usb_port = USBC_PORT_C0,
			.driver = &virtual_usb_mux_driver,
			.hpd_update = &virtual_hpd_update,
		},
		.next = &usbc0_usb3_mb_retimer,
	},
	[USBC_PORT_C1] = {
		.mux = &(const struct usb_mux) {
			.usb_port = USBC_PORT_C1,
			.driver = &virtual_usb_mux_driver,
			.hpd_update = &virtual_hpd_update,
		},
		.next = &usbc1_usb3_db_retimer,
	},
};
BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT);

static void board_tcpc_init(void)
{
	/* Don't reset TCPCs after initial reset */
	if (!system_jumped_late())
		board_reset_pd_mcu();

	/* Enable PPC interrupts. */
	gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL);
	gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL);

	/* Enable TCPC interrupts. */
	gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL);
	gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL);

	/* Enable BC1.2 interrupts. */
	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL);
	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL);
}
DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_CHIPSET);

/******************************************************************************/
/* TCPC support routines */
uint16_t tcpc_get_alert_status(void)
{
	uint16_t status = 0;

	/*
	 * Check which port has the ALERT line set
	 */
	if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL))
		status |= PD_STATUS_TCPC_ALERT_0;
	if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL))
		status |= PD_STATUS_TCPC_ALERT_1;

	return status;
}

int ppc_get_alert_status(int port)
{
	if (port == USBC_PORT_C0)
		return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0;
	else
		return gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0;
}

/******************************************************************************/
/* USB-A charging control */
const int usb_port_enable[USB_PORT_COUNT] = {
	GPIO_EN_PP5000_USBA,
};

static void ps8815_reset(int port)
{
	int val;
	int i2c_port;
	enum gpio_signal ps8xxx_rst_odl;

	if (port == USBC_PORT_C0) {
		ps8xxx_rst_odl = GPIO_USB_C0_RT_RST_ODL;
		i2c_port = I2C_PORT_USB_C0;
	} else if (port == USBC_PORT_C1) {
		ps8xxx_rst_odl = GPIO_USB_C1_RT_RST_ODL;
		i2c_port = I2C_PORT_USB_C1;
	} else {
		return;
	}

	gpio_set_level(ps8xxx_rst_odl, 0);
	msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS, PS8815_PWR_H_RST_H_DELAY_MS));
	gpio_set_level(ps8xxx_rst_odl, 1);
	msleep(PS8815_FW_INIT_DELAY_MS);

	CPRINTS("[C%d] %s: patching ps8815 registers", port, __func__);

	if (i2c_read8(i2c_port, PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, &val) ==
	    EC_SUCCESS)
		CPRINTS("ps8815: reg 0x0f was %02x", val);

	if (i2c_write8(i2c_port, PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, 0x31) ==
	    EC_SUCCESS)
		CPRINTS("ps8815: reg 0x0f set to 0x31");

	if (i2c_read8(i2c_port, PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, &val) ==
	    EC_SUCCESS)
		CPRINTS("ps8815: reg 0x0f now %02x", val);
}

void board_reset_pd_mcu(void)
{
	ps8815_reset(USBC_PORT_C0);
	usb_mux_hpd_update(USBC_PORT_C0, USB_PD_MUX_HPD_LVL_DEASSERTED |
						 USB_PD_MUX_HPD_IRQ_DEASSERTED);
	ps8815_reset(USBC_PORT_C1);
	usb_mux_hpd_update(USBC_PORT_C1, USB_PD_MUX_HPD_LVL_DEASSERTED |
						 USB_PD_MUX_HPD_IRQ_DEASSERTED);
}