/* Copyright 2022 The ChromiumOS Authors
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

#include "common.h"
#include "compile_time_macros.h"
#include "console.h"
#include "driver/bc12/pi3usb9201_public.h"
#include "driver/ppc/syv682x_public.h"
#include "driver/retimer/bb_retimer_public.h"
#include "driver/retimer/kb800x.h"
#include "driver/tcpm/rt1715.h"
#include "driver/tcpm/tcpci.h"
#include "ec_commands.h"
#include "gpio.h"
#include "gpio_signal.h"
#include "hooks.h"
#include "system.h"
#include "task.h"
#include "task_id.h"
#include "timer.h"
#include "usb_charge.h"
#include "usb_mux.h"
#include "usb_pd.h"
#include "usb_pd_tcpm.h"
#include "usbc_config.h"
#include "usbc_ppc.h"

#include <stdbool.h>
#include <stdint.h>

#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ##args)
#define CPRINTS(format, args...) cprints(CC_USBPD, format, ##args)

/* USBC TCPC configuration */
const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
	[USBC_PORT_C0] = {
		.bus_type = EC_BUS_TYPE_I2C,
		.i2c_info = {
			.port = I2C_PORT_USB_C0_C2_TCPC,
			.addr_flags = RT1715_I2C_ADDR_FLAGS,
		},
		.drv = &rt1715_tcpm_drv,
	},
};

/* USBC PPC configuration */
struct ppc_config_t ppc_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = {
	[USBC_PORT_C0] = {
		.i2c_port = I2C_PORT_USB_C0_C2_PPC,
		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
		.drv = &syv682x_drv,
	},
};

unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);

/* USBC mux configuration - Alder Lake includes internal mux */
static const struct usb_mux_chain usbc0_tcss_usb_mux = {
	.mux =
		&(const struct usb_mux){
			.usb_port = USBC_PORT_C0,
			.driver = &virtual_usb_mux_driver,
			.hpd_update = &virtual_hpd_update,
		},
};

const struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
	[USBC_PORT_C0] = {
		.mux = &(const struct usb_mux) {
			.usb_port = USBC_PORT_C0,
			.driver = &bb_usb_retimer,
			.hpd_update = bb_retimer_hpd_update,
			.i2c_port = I2C_PORT_USB_C0_C2_MUX,
			.i2c_addr_flags = USBC_PORT_C0_BB_RETIMER_I2C_ADDR,
		},
		.next = &usbc0_tcss_usb_mux,
	},
};

/* BC1.2 charger detect configuration */
const struct pi3usb9201_config_t
	pi3usb9201_bc12_chips[CONFIG_USB_PD_PORT_MAX_COUNT] = {
	[USBC_PORT_C0] = {
		.i2c_port = I2C_PORT_USB_C0_C2_BC12,
		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
	},
};

__override int bb_retimer_power_enable(const struct usb_mux *me, bool enable)
{
	enum gpio_signal rst_signal;

	if (me->usb_port == USBC_PORT_C0) {
		rst_signal = GPIO_USB_C0_RT_RST_ODL;
	} else {
		return EC_ERROR_INVAL;
	}

	/*
	 * We do not have a load switch for the burnside bridge chips,
	 * so we only need to sequence reset.
	 */

	if (enable) {
		/*
		 * Tpw, minimum time from VCC to RESET_N de-assertion is 100us.
		 * For boards that don't provide a load switch control, the
		 * retimer_init() function ensures power is up before calling
		 * this function.
		 */
		gpio_set_level(rst_signal, 1);
		/*
		 * Allow 1ms time for the retimer to power up lc_domain
		 * which powers I2C controller within retimer
		 */
		msleep(1);
	} else {
		gpio_set_level(rst_signal, 0);
		msleep(1);
	}
	return EC_SUCCESS;
}

__override int bb_retimer_reset(const struct usb_mux *me)
{
	/*
	 * TODO(b/193402306, b/195375738): Remove this once transition to
	 * QS Silicon is complete
	 */
	bb_retimer_power_enable(me, false);
	msleep(5);
	bb_retimer_power_enable(me, true);
	msleep(25);

	return EC_SUCCESS;
}

void board_reset_pd_mcu(void)
{
	/*
	 * TODO(b/179648104): figure out correct timing
	 */
}

static void board_tcpc_init(void)
{
	/* Don't reset TCPCs after initial reset */
	if (!system_jumped_late()) {
		board_reset_pd_mcu();
	}

	/* Enable PPC interrupts. */
	gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL);

	/* Enable TCPC interrupts. */
	gpio_enable_interrupt(GPIO_USB_C0_C2_TCPC_INT_ODL);
}
DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_CHIPSET);

uint16_t tcpc_get_alert_status(void)
{
	uint16_t status = 0;

	if (gpio_get_level(GPIO_USB_C0_C2_TCPC_INT_ODL) == 0)
		status |= PD_STATUS_TCPC_ALERT_0 | PD_STATUS_TCPC_ALERT_2;

	return status;
}

int ppc_get_alert_status(int port)
{
	if (port == USBC_PORT_C0)
		return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0;
	return 0;
}

void tcpc_alert_event(enum gpio_signal signal)
{
	switch (signal) {
	case GPIO_USB_C0_C2_TCPC_INT_ODL:
		schedule_deferred_pd_interrupt(USBC_PORT_C0);
		break;
	default:
		break;
	}
}

void bc12_interrupt(enum gpio_signal signal)
{
	switch (signal) {
	case GPIO_USB_C0_BC12_INT_ODL:
		usb_charger_task_set_event(0, USB_CHG_EVENT_BC12);
		break;
	default:
		break;
	}
}

void ppc_interrupt(enum gpio_signal signal)
{
	switch (signal) {
	case GPIO_USB_C0_PPC_INT_ODL:
		syv682x_interrupt(USBC_PORT_C0);
		break;
	default:
		break;
	}
}

void retimer_interrupt(enum gpio_signal signal)
{
	/*
	 * TODO(b/179513527): add USB-C support
	 */
}

__override bool board_is_dts_port(int port)
{
	return port == USBC_PORT_C0;
}

__override bool board_is_tbt_usb4_port(int port)
{
	return true;
}

__override enum tbt_compat_cable_speed board_get_max_tbt_speed(int port)
{
	if (!board_is_tbt_usb4_port(port))
		return TBT_SS_RES_0;

	return TBT_SS_TBT_GEN3;
}