/* Copyright 2017 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ /* Nuvoton M4 EB board-specific configuration */ #include "adc.h" #include "backlight.h" #include "chipset.h" #include "common.h" #include "driver/temp_sensor/tmp006.h" #include "extpower.h" #include "fan.h" #include "fan_chip.h" #include "gpio.h" #include "i2c.h" #include "keyboard_scan.h" #include "lid_switch.h" #include "peci.h" #include "power.h" #include "power_button.h" #include "pwm.h" #include "pwm_chip.h" #include "registers.h" #include "spi.h" #include "switch.h" #include "temp_sensor.h" #include "temp_sensor_chip.h" #include "timer.h" #include "thermal.h" #include "util.h" #include "gpio_list.h" /******************************************************************************/ /* ADC channels. Must be in the exactly same order as in enum adc_channel. */ const struct adc_t adc_channels[] = { [ADC_CH_0] = {"ADC0", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, [ADC_CH_1] = {"ADC1", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, [ADC_CH_2] = {"ADC2", NPCX_ADC_CH2, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, [ADC_CH_3] = {"ADC3", NPCX_ADC_CH3, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, [ADC_CH_4] = {"ADC4", NPCX_ADC_CH4, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, }; BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); /******************************************************************************/ /* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ const struct pwm_t pwm_channels[] = { [PWM_CH_FAN] = { 0, PWM_CONFIG_OPEN_DRAIN, 25000}, [PWM_CH_KBLIGHT] = { 2, 0, 10000 }, }; BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); /******************************************************************************/ /* Physical fans. These are logically separate from pwm_channels. */ const struct fan_conf fan_conf_0 = { .flags = FAN_USE_RPM_MODE, .ch = 0, /* Use MFT id to control fan */ .pgood_gpio = GPIO_PGOOD_FAN, .enable_gpio = -1, }; const struct fan_rpm fan_rpm_0 = { .rpm_min = 1000, .rpm_start = 1000, .rpm_max = 5200, }; const struct fan_t fans[] = { [FAN_CH_0] = { .conf = &fan_conf_0, .rpm = &fan_rpm_0, }, }; BUILD_ASSERT(ARRAY_SIZE(fans) == FAN_CH_COUNT); /******************************************************************************/ /* MFT channels. These are logically separate from pwm_channels. */ const struct mft_t mft_channels[] = { [MFT_CH_0] = { NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN}, }; BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); /******************************************************************************/ /* I2C ports */ const struct i2c_port_t i2c_ports[] = { {"master0-0", NPCX_I2C_PORT0_0, 100, GPIO_I2C0_SCL0, GPIO_I2C0_SDA0}, {"master1-0", NPCX_I2C_PORT1_0, 100, GPIO_I2C1_SCL0, GPIO_I2C1_SDA0}, {"master2-0", NPCX_I2C_PORT2_0, 100, GPIO_I2C2_SCL0, GPIO_I2C2_SDA0}, {"master3-0", NPCX_I2C_PORT3_0, 100, GPIO_I2C3_SCL0, GPIO_I2C3_SDA0}, {"master7-0", NPCX_I2C_PORT7_0, 100, GPIO_I2C7_SCL0, GPIO_I2C7_SDA0}, }; const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); /******************************************************************************/ /* SPI devices */ const struct spi_device_t spi_devices[] = { { CONFIG_SPI_FLASH_PORT, 0, GPIO_SPI_CS_L}, }; const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices); /******************************************************************************/ /* Wake-up pins for hibernate */ const enum gpio_signal hibernate_wake_pins[] = { GPIO_AC_PRESENT, GPIO_LID_OPEN, GPIO_POWER_BUTTON_L, }; const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); /******************************************************************************/ /* Keyboard scan setting */ __override struct keyboard_scan_config keyscan_config = { .output_settle_us = 40, .debounce_down_us = 6 * MSEC, .debounce_up_us = 30 * MSEC, .scan_period_us = 1500, .min_post_scan_delay_us = 1000, .poll_timeout_us = SECOND, .actual_key_mask = { 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, 0xa4, 0xff, 0xf6, 0x55, 0xfa, 0xc8 /* full set */ }, };