/* Copyright 2016 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. * * Battery pack vendor provided charging profile */ #include "battery.h" #include "battery_smart.h" #include "charge_state.h" #include "console.h" #include "driver/charger/rt946x.h" #include "ec_commands.h" #include "extpower.h" #include "util.h" static const struct battery_info info = { .voltage_max = 4350, .voltage_normal = 3800, .voltage_min = 3000, .precharge_current = 700, .start_charging_min_c = 0, .start_charging_max_c = 45, .charging_min_c = 0, .charging_max_c = 45, .discharging_min_c = -20, .discharging_max_c = 55, }; const struct battery_info *battery_get_info(void) { return &info; } int board_cut_off_battery(void) { return rt946x_cutoff_battery(); } enum battery_disconnect_state battery_get_disconnect_state(void) { if (battery_is_present() == BP_YES) return BATTERY_NOT_DISCONNECTED; return BATTERY_DISCONNECTED; } int charger_profile_override(struct charge_state_data *curr) { const struct battery_info *batt_info = battery_get_info(); int now_discharging; /* battery temp in 0.1 deg C */ int bat_temp_c = curr->batt.temperature - 2731; if (curr->state == ST_CHARGE) { /* Don't charge if outside of allowable temperature range */ if (bat_temp_c >= batt_info->charging_max_c * 10 || bat_temp_c < batt_info->charging_min_c * 10) { curr->requested_current = curr->requested_voltage = 0; curr->batt.flags &= ~BATT_FLAG_WANT_CHARGE; curr->state = ST_IDLE; now_discharging = 0; /* Don't start charging if battery is nearly full */ } else if (curr->batt.status & STATUS_FULLY_CHARGED) { curr->requested_current = curr->requested_voltage = 0; curr->batt.flags &= ~BATT_FLAG_WANT_CHARGE; curr->state = ST_DISCHARGE; now_discharging = 1; } else now_discharging = 0; charger_discharge_on_ac(now_discharging); } return 0; } /* Customs options controllable by host command. */ #define PARAM_FASTCHARGE (CS_PARAM_CUSTOM_PROFILE_MIN + 0) enum ec_status charger_profile_override_get_param(uint32_t param, uint32_t *value) { return EC_RES_INVALID_PARAM; } enum ec_status charger_profile_override_set_param(uint32_t param, uint32_t value) { return EC_RES_INVALID_PARAM; }