/* -*- mode:c -*-
 *
 * Copyright 2019 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Declare symbolic names for all the GPIOs that we care about.
 * Note: Those with interrupt handlers must be declared first. */

/* Wake Source interrupts */
GPIO_INT(EC_LID_OPEN,          PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt)
GPIO_INT(EC_WP_L,              PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)
GPIO_INT(H1_EC_PWR_BTN_ODL,    PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt)
GPIO_INT(ACOK_OD,              PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt)

/* Power sequencing interrupts */

/* Sensor Interrupts */

/* USB-C interrupts */

/* HDMI interrupts */

/* Volume button interrupts */

/* AP Signals */
GPIO(EC_RST_ODL,               PIN(0, 2), GPIO_ODR_HIGH)
GPIO(EC_ENTERING_RW,           PIN(E, 3), GPIO_OUT_LOW)
GPIO(EC_PCH_WAKE_ODL,          PIN(7, 4), GPIO_ODR_HIGH)
GPIO(EC_PCH_PWR_BTN_ODL,       PIN(C, 1), GPIO_ODR_HIGH)

/* USB and USBC Signals */

/* Misc Signals */

/* I2C pins - Alternate function below configures I2C module on these pins */
GPIO(EC_I2C0_SENSOR_SCL,       PIN(B, 5), GPIO_INPUT | GPIO_SEL_1P8V)
GPIO(EC_I2C0_SENSOR_SDA,       PIN(B, 4), GPIO_INPUT | GPIO_SEL_1P8V)
GPIO(EC_I2C1_USB_C0_SCL,       PIN(9, 0), GPIO_INPUT)
GPIO(EC_I2C1_USB_C0_SDA,       PIN(8, 7), GPIO_INPUT)
GPIO(EC_I2C2_USB_C1_SCL,       PIN(9, 2), GPIO_INPUT)
GPIO(EC_I2C2_USB_C1_SDA,       PIN(9, 1), GPIO_INPUT)
GPIO(EC_I2C3_USB_1_MIX_SCL,    PIN(D, 1), GPIO_INPUT)
GPIO(EC_I2C3_USB_1_MIX_SDA,    PIN(D, 0), GPIO_INPUT)
GPIO(EC_I2C5_POWER_SCL,        PIN(3, 3), GPIO_INPUT)
GPIO(EC_I2C5_POWER_SDA,        PIN(3, 6), GPIO_INPUT)
GPIO(EC_I2C7_EEPROM_SCL,       PIN(B, 3), GPIO_INPUT)
GPIO(EC_I2C7_EEPROM_SDA,       PIN(B, 2), GPIO_INPUT)

/* Alternate functions GPIO definitions */
ALTERNATE(PIN_MASK(B, BIT(5) | BIT(2)), 0, MODULE_I2C, (GPIO_INPUT | GPIO_SEL_1P8V)) /* I2C0 */
ALTERNATE(PIN_MASK(9, BIT(0) | BIT(2) | BIT(1)), 0, MODULE_I2C, 0)                   /* I2C1 SCL / I2C2 */
ALTERNATE(PIN_MASK(8, BIT(7)), 0, MODULE_I2C, 0)                                     /* I2C1 SDA */
ALTERNATE(PIN_MASK(D, BIT(1) | BIT(0)), 0, MODULE_I2C, 0)                            /* I2C3 */
ALTERNATE(PIN_MASK(3, BIT(3) | BIT(6)), 0, MODULE_I2C, 0)                            /* I2C5 */
ALTERNATE(PIN_MASK(B, BIT(3) | BIT(2)), 0, MODULE_I2C, 0)                            /* I2C7 */

/* UART */
ALTERNATE(PIN_MASK(6, BIT(5) | BIT(4)), 0, MODULE_UART, 0)                           /* UART from EC to Servo */