/* Copyright 2020 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ /* * Memory mapping for STM32G431xb. The STM32G431xb is a category 2 device within * the STM32G4 chip family. Category 2 devices have either 32, 64, or 128 kB of * internal flash. The 'xB' indicates 128 kB of internal flash. * * STM32G431x is a single bank only device consisting of 64 pages of 2 kB * each. It supports both a mass erase or page erase feature. Note that * CONFIG_FLASH_BANK_SIZE is consistent with page size as defined in RM0440 TRM * for the STM32G4 chip family. The minimum erase size is 1 page. * * The minimum write size for STM32G4 is 8 bytes. Cros-EC does not support * PSTATE in single bank memories with a write size > 4 bytes. */ #define CONFIG_FLASH_SIZE_BYTES (128 * 1024) #define CONFIG_FLASH_WRITE_SIZE 0x0004 #define CONFIG_FLASH_BANK_SIZE (2 * 1024) #define CONFIG_FLASH_ERASE_SIZE CONFIG_FLASH_BANK_SIZE /* Erasing 128K can take up to 2s, need to defer erase. */ #define CONFIG_FLASH_DEFERRED_ERASE /* No page mode on STM32G4, so no benefit to larger write sizes */ #define CONFIG_FLASH_WRITE_IDEAL_SIZE CONFIG_FLASH_WRITE_SIZE /* * STM32G431x6/x8/xB devices feature 32 Kbytes of embedded SRAM. This SRAM * is split into three blocks: * • 16 Kbytes mapped at address 0x2000 0000 (SRAM1). * • 6 Kbytes mapped at address 0x2000 4000 (SRAM2). * • 10 Kbytes mapped at address 0x1000 0000 (CCM SRAM). It is also aliased * at 0x2000 5800 address to be accessed by all bus controllers. */ #define CONFIG_RAM_BASE 0x20000000 #define CONFIG_RAM_SIZE 0x00008000 #undef I2C_PORT_COUNT #define I2C_PORT_COUNT 3 /* Number of DMA channels supported (6 channels each for DMA1 and DMA2) */ #define DMAC_COUNT 12 /* Use PSTATE embedded in the RO image, not in its own erase block */ #define CONFIG_FLASH_PSTATE #undef CONFIG_FLASH_PSTATE_BANK /* Number of IRQ vectors on the NVIC */ #define CONFIG_IRQ_COUNT 101 /* USB packet ram config */ #define CONFIG_USB_RAM_BASE 0x40006000 #define CONFIG_USB_RAM_SIZE 1024 #define CONFIG_USB_RAM_ACCESS_TYPE uint16_t #define CONFIG_USB_RAM_ACCESS_SIZE 2