/* Copyright 2016 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ /* Apollolake chipset power control module for Chrome EC */ #include "chipset.h" #include "console.h" #include "gpio.h" #include "power/intel_x86.h" #include "task.h" #include "timer.h" /* Console output macros */ #define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ##args) /* * force_shutdown is used to maintain chipset shutdown request. This request * needs to be handled from within the chipset task. */ static int force_shutdown; /* Power signals list. Must match order of enum power_signal. */ const struct power_signal_info power_signal_list[] = { #ifdef CONFIG_POWER_S0IX [X86_SLP_S0_N] = { GPIO_PCH_SLP_S0_L, POWER_SIGNAL_ACTIVE_HIGH | POWER_SIGNAL_DISABLE_AT_BOOT, "SLP_S0_DEASSERTED", }, #endif [X86_SLP_S3_N] = { GPIO_PCH_SLP_S3_L, POWER_SIGNAL_ACTIVE_HIGH, "SLP_S3_DEASSERTED", }, [X86_SLP_S4_N] = { GPIO_PCH_SLP_S4_L, POWER_SIGNAL_ACTIVE_HIGH, "SLP_S4_DEASSERTED", }, [X86_SUSPWRDNACK] = { GPIO_SUSPWRDNACK, POWER_SIGNAL_ACTIVE_HIGH, "SUSPWRDNACK_DEASSERTED", }, [X86_ALL_SYS_PG] = { GPIO_ALL_SYS_PGOOD, POWER_SIGNAL_ACTIVE_HIGH, "ALL_SYS_PGOOD", }, [X86_RSMRST_N] = { GPIO_PG_EC_RSMRST_ODL, POWER_SIGNAL_ACTIVE_HIGH, "RSMRST_L", }, [X86_PGOOD_PP3300] = { GPIO_PP3300_PG, POWER_SIGNAL_ACTIVE_HIGH, "PP3300_PG", }, [X86_PGOOD_PP5000] = { GPIO_PP5000_PG, POWER_SIGNAL_ACTIVE_HIGH, "PP5000_PG", }, }; BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT); __attribute__((weak)) void chipset_do_shutdown(void) { /* Need to implement board specific shutdown */ } static void internal_chipset_shutdown(void) { /* * UART buffer gets overwritten by other tasks if it is not explicitly * flushed before printing it on the console by same task. Hence, clean * up the UART buffer so that all the debug messages are printed on the * UART console before doing shutdown. */ cflush(); CPRINTS("%s()", __func__); force_shutdown = 0; chipset_do_shutdown(); } void chipset_force_shutdown(enum chipset_shutdown_reason reason) { CPRINTS("%s: %d", __func__, reason); report_ap_reset(reason); /* * This function is called from multiple tasks and hence it is racy! But * since things are going down hard, it does not matter if some task * misses out. */ force_shutdown = 1; task_wake(TASK_ID_CHIPSET); } enum power_state chipset_force_g3(void) { chipset_force_shutdown(CHIPSET_SHUTDOWN_G3); return POWER_G3; } void chipset_handle_espi_reset_assert(void) { } static void handle_all_sys_pgood(enum power_state state) { /* * Pass through asynchronously, as SOC may not react * immediately to power changes. */ int in_level = gpio_get_level(GPIO_ALL_SYS_PGOOD); int out_level = gpio_get_level(GPIO_PCH_SYS_PWROK); /* Nothing to do. */ if (in_level == out_level) return; gpio_set_level(GPIO_PCH_SYS_PWROK, in_level); CPRINTS("Pass through GPIO_ALL_SYS_PGOOD: %d", in_level); } enum power_state power_handle_state(enum power_state state) { enum power_state new_state; /* Process ALL_SYS_PGOOD state changes. */ handle_all_sys_pgood(state); if (state == POWER_S5 && !power_has_signals(IN_PGOOD_ALL_CORE)) { /* Required rail went away */ internal_chipset_shutdown(); new_state = POWER_S5G3; goto rsmrst_handle; } /* If force shutdown is requested, perform that. */ if (force_shutdown) internal_chipset_shutdown(); new_state = common_intel_x86_power_handle_state(state); rsmrst_handle: /* * Process RSMRST_L state changes: * RSMRST_L de-assertion is passed to SoC only on G3S5 to S5 transition. * RSMRST_L is also checked in some states and, if asserted, will * force shutdown. */ common_intel_x86_handle_rsmrst(new_state); return new_state; } /** * chipset check if PLTRST# is valid. * * @return non-zero if PLTRST# is valid, 0 if invalid. */ int chipset_pltrst_is_valid(void) { /* * Invalid PLTRST# from SOC unless RSMRST# * from PMIC through EC to soc is deasserted. */ return (gpio_get_level(GPIO_PG_EC_RSMRST_ODL) && gpio_get_level(GPIO_PCH_RSMRST_L)); }