# Copyright 2014 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.
#
# nuvoton-m4 devices support both JTAG and SWD transports.
#

source [find target/swj-dp.tcl]

if { [info exists CHIPNAME] } {
   set  _CHIPNAME $CHIPNAME
} else {
   set  _CHIPNAME npcx_ec
}

if { [info exists ENDIAN] } {
   set  _ENDIAN $ENDIAN
} else {
   set  _ENDIAN little
}

# Work-area is a space in RAM used for flash programming
# By default use 16kB
if { [info exists WORKAREASIZE] } {
   set  _WORKAREASIZE $WORKAREASIZE
} else {
   set  _WORKAREASIZE 0x8000
}

#jtag scan chain
if { [info exists CPUTAPID ] } {
   set _CPUTAPID $CPUTAPID
} else {
   set _CPUTAPID 0x4BA00477
}

#jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID

set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position \
		$_CHIPNAME.cpu -work-area-phys 0x200C0000 \
		-work-area-size $_WORKAREASIZE

# JTAG speed
adapter_khz 100

adapter_nsrst_delay 100
jtag_ntrst_delay 100

# use sysresetreq to perform a system reset
cortex_m reset_config sysresetreq

#reset configuration
reset_config trst_and_srst

$_TARGETNAME configure -event reset-start {
	echo "NPCX Reset..."
	halt
	adapter_khz 1000
}