/* Copyright 2022 The ChromiumOS Authors
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/ {
	aliases {
		gpio-wp = &gpio_wp;
	};

	named-gpios {
		compatible = "named-gpios";

		ioex_kbd_intr_n: ioex-kbd-intr-n {
			gpios = <&gpio0 0 GPIO_INPUT>;
			enum-name = "GPIO_KB_DISCRETE_INT";
		};
		all_sys_pwrgd: all-sys-pwrgd {
			gpios = <&gpio7 0 GPIO_INPUT>;
			enum-name = "GPIO_PG_EC_ALL_SYS_PWRGD";
		};
		rsmrst_pwrgd: rsmrst-pwrgd {
			gpios = <&gpio6 6 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
			enum-name = "GPIO_PG_EC_RSMRST_ODL";
		};
		pch_slp_s0_n: pch-slp-s0-n-ec {
			gpios = <&gpioa 1 GPIO_INPUT>;
			enum-name = "GPIO_PCH_SLP_S0_L"; /* 1.8V */
		};
		pm-slp-s3-n-ec {
			gpios = <&gpiob 0 GPIO_INPUT>; /* 1.8V */
			enum-name = "GPIO_PCH_SLP_S3_L";
		};
		pm-slp-s4-n-ec {
			gpios = <&gpioa 5 GPIO_INPUT>; /* 1.8V */
		};
		volume-up {
			gpios = <&gpio6 1 (GPIO_INPUT | GPIO_PULL_UP)>;
			enum-name = "GPIO_VOLUME_UP_L";
		};
		vol-dn-ec-r {
			gpios = <&gpio0 3 (GPIO_INPUT | GPIO_PULL_UP)>;
			enum-name = "GPIO_VOLUME_DOWN_L";
		};
		smc_lid: smc-lid {
			gpios = <&gpio0 1 (GPIO_INPUT | GPIO_PULL_UP)>;
			enum-name = "GPIO_LID_OPEN";
		};
		smc_onoff_n: smc-onoff-n {
			gpios = <&gpiod 2 GPIO_INPUT>;
			enum-name = "GPIO_POWER_BUTTON_L";
		};
		gpio_wp: wp-l {
			gpios = <&gpiod 5 GPIO_INPUT>;
		};
		std_adp_prsnt: std-adp-prsnt {
			gpios = <&gpioc 6 GPIO_INPUT>;
			enum-name = "GPIO_DC_JACK_PRESENT";
		};
		bc_acok: bc-acok-ec {
			gpios = <&gpio0 2 GPIO_INPUT>;
			enum-name = "GPIO_AC_PRESENT";
		};
		usbc_tcpc_alrt_p0: usbc-tcpc-alrt-p0 {
			gpios = <&gpio4 0 GPIO_INPUT>;
		};
		/* NOTE: Netname is USBC_TCPC_PPC_ALRT_P0 */
		usb_c0_c1_tcpc_rst_odl: usb-c0-c1-tcpc-rst-odl {
			gpios = <&gpiod 0 GPIO_ODR_HIGH>;
		};
		/* NOTE: Netname is USBC_TCPC_ALRT_P1 */
		usbc_tcpc_ppc_alrt_p0: usbc-tcpc-ppc-alrt-p0 {
			gpios = <&gpiod 1 GPIO_INPUT>;
		};
		usbc_tcpc_ppc_alrt_p1: usbc-tcpc-ppc-alrt-p1 {
			gpios = <&gpioe 4 GPIO_INPUT>;
		};
		usbc_tcpc_alrt_p2: usbc-tcpc-alrt-p2 {
			gpios = <&gpio9 1 GPIO_INPUT>;
		};
		/* NOTE: Netname is USBC_TCPC_PPC_ALRT_P3 */
		usbc_tcpc_alrt_p3: usbc-tcpc-alrt-p3 {
			gpios = <&gpiof 3 GPIO_INPUT>;
		};
		gpio_ec_pch_wake_odl: pch-wake-n {
			gpios = <&gpio7 4 GPIO_ODR_HIGH>;
		};
		espi-rst-n {
			gpios = <&gpio5 4 GPIO_INPUT>; /* 1.8V */
		};
		plt-rst-l {
			gpios = <&gpioa 2 GPIO_INPUT>; /* 1.8V */
		};
		slate-mode-indication {
			gpios = <&gpio9 4 GPIO_INPUT>; /* 1.8V */
		};
		prochot-ec {
			gpios = <&gpio6 0 GPIO_INPUT>;
			enum-name = "GPIO_CPU_PROCHOT";
		};
		sys_rst_odl: sys-rst-odl-ec {
			gpios = <&gpioc 5 GPIO_ODR_HIGH>;
			enum-name = "GPIO_SYS_RESET_L";
		};
		ec_pch_rsmrst_l: pm-rsmrst-r-n {
			gpios = <&gpioa 4 GPIO_OUTPUT_LOW>; /* 1.8V */
			enum-name = "GPIO_PCH_RSMRST_L";
		};
		pm-pwrbtn-n-ec {
			gpios = <&gpiod 4 GPIO_ODR_HIGH>;
			enum-name = "GPIO_PCH_PWRBTN_L";
		};
		ec_spi_oe_mecc: ec-spi-oe-mecc-r {
			gpios = <&gpioa 7 GPIO_OUTPUT_LOW>; /* 1.8V */
		};
		en_pp3300_a: ec-ds3-r {
			gpios = <&gpioc 4 GPIO_OUTPUT_LOW>;
			enum-name = "GPIO_EN_PP3300_A";
			alias = "GPIO_TEMP_SENSOR_POWER";
		};
		ec_pch_pwrok_od: pch-pwrok-ec-r {
			gpios = <&gpiod 3 GPIO_ODR_LOW>;
			enum-name = "GPIO_PCH_PWROK";
		};
		sys_pwrok_ec: sys-pwrok-ec {
			gpios = <&gpiof 5 GPIO_ODR_LOW>;
			enum-name = "GPIO_PCH_SYS_PWROK";
		};
		bat-det-ec {
			gpios = <&gpio7 6 GPIO_INPUT>;
			enum-name = "GPIO_BATT_PRES_ODL";
		};
		edp-bklt-en {
			gpios = <&gpioe 1 GPIO_OUTPUT_HIGH>;
		};
		/* TODO: move both LEDs to PWM */
		led-1-l-ec {
			gpios = <&gpiob 6 GPIO_OUTPUT_HIGH>;
		};
		led-2-l-ec {
			gpios = <&gpiob 7 GPIO_OUTPUT_HIGH>;
		};
		gpio_fan_control: therm-sen-mecc-r {
			gpios = <&gpioc 0 GPIO_OUTPUT_LOW>;
		};
		/* NOTE: Netname is USBC_TCPC_ALRT_P3 */
		ccd_mode_odl: ccd-mode-odl {
			gpios = <&gpio9 2 GPIO_INPUT>;
			enum-name = "GPIO_CCD_MODE_ODL";
		};
		smb-bs-clk {
			gpios = <&gpiob 3 GPIO_INPUT>;
		};
		smb-bs-data {
			gpios = <&gpiob 2 GPIO_INPUT>;
		};
		usbc-tcpc-i2c-clk-aic1 {
			gpios = <&gpiob 5 GPIO_INPUT>;
		};
		usbc-tcpc-i2c-data-aic1 {
			gpios = <&gpiob 4 GPIO_INPUT>;
		};
		usbc-tcpc-i2c-clk-aic2 {
			gpios = <&gpio9 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
		};
		usbc-tcpc-i2c-data-aic2 {
			gpios = <&gpio8 7 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
		};
		/* Unused 1.8V pins */
		i3c-1-sda-r {
			gpios = <&gpio5 0 GPIO_INPUT>;
		};
		i3c-1-scl-r {
			gpios = <&gpio5 6 GPIO_INPUT>;
		};
		espi-alert0-n-r {
			gpios = <&gpio5 7 GPIO_INPUT>;
		};
		tp-gpio95 {
			gpios = <&gpio9 5 GPIO_INPUT>;
		};
		cpu-c10-gate {
			gpios = <&gpio9 6 GPIO_INPUT>;
		};
		slp-s0-cs-n-ec {
			gpios = <&gpio9 7 GPIO_INPUT>;
		};
		rtc-rst-n-r {
			gpios = <&gpioa 0 GPIO_INPUT>;
		};
		tp-gpioa6 {
			gpios = <&gpioa 6 GPIO_INPUT>;
		};
		sml1-clk-mecc {
			gpios = <&gpio3 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
		};
		sml1-data-mecc {
			gpios = <&gpio3 6 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
		};
		sml1-alert {
			gpios = <&gpioc 7 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
		};
		smb-pch-alrt {
			gpios = <&gpioa 3 GPIO_INPUT>;
		};
		smb-pch-data {
			gpios = <&gpioc 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
		};
		smb-pch-clk {
			gpios = <&gpioc 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
		};
		/* Unused 3.3V pins */
		cpu-cat-err-mecc {
			gpios = <&gpio3 4 GPIO_INPUT>;
		};
		tp-gpio37 {
			gpios = <&gpio3 7 GPIO_INPUT>;
		};
		tp-vccpdsw-3p3-ec {
			gpios = <&gpio4 5 GPIO_INPUT>;
		};
		mech-pwr-btn-in-odl {
			gpios = <&gpio6 2 GPIO_INPUT>;
		};
		tp-gpio63 {
			gpios = <&gpio6 3 GPIO_INPUT>;
		};
		tp-gpio67 {
			gpios = <&gpio6 7 GPIO_INPUT>;
		};
		tp-gpio72 {
			gpios = <&gpio7 2 GPIO_INPUT>;
		};
		tp-gpio75 {
			gpios = <&gpio7 5 GPIO_INPUT>;
		};
		ec-peci-ec {
			gpios = <&gpio8 1 GPIO_INPUT>;
		};
		tp-gpiob1 {
			gpios = <&gpiob 1 GPIO_INPUT>;
		};
		std-adpt-cntrl-GPIO_r {
			gpios = <&gpioc 3 GPIO_INPUT>;
		};
		ec-packet-mode-ec {
			gpios = <&gpioe 2 GPIO_INPUT>;
		};
		tp-gpioe3 {
			gpios = <&gpioe 3 GPIO_INPUT>;
		};
		boot-stall-r {
			gpios = <&gpioe 5 GPIO_INPUT>;
		};
		tp-gpiof0 {
			gpios = <&gpiof 0 GPIO_INPUT>;
		};
		tp-gpiof1 {
			gpios = <&gpiof 1 GPIO_INPUT>;
		};
		usbc_tcpc_ppc_alrt_p2: usbc-tcpc-ppc-alrt-p2 {
			gpios = <&gpiof 2 GPIO_INPUT>;
		};
		tp-gpiof4 {
			gpios = <&gpiof 4 GPIO_INPUT>;
		};

		/* KBD IOEX configuration */
		srtc-rst {
			gpios = <&ioex_it8801_port0 3 GPIO_OUTPUT_LOW>;
		};
		ec-h1-packet-mode {
			gpios = <&ioex_it8801_port0 4 GPIO_OUTPUT_LOW>;
			enum-name = "GPIO_PACKET_MODE_EN";
		};
		rtc-rst {
			gpios = <&ioex_it8801_port0 6 GPIO_OUTPUT_LOW>;
		};
		ec-entering-rw {
			gpios = <&ioex_it8801_port0 7 GPIO_OUTPUT_LOW>;
			enum-name = "GPIO_ENTERING_RW";
		};
		ioex-sys-rst-odl-ec {
			gpios = <&ioex_it8801_port1 0 GPIO_INPUT>;
		};
		ioex-slate-mode-indication {
			gpios = <&ioex_it8801_port1 2 GPIO_INPUT>;
		};

		/* USB C IOEX configuration */
		usb_c0_hb_retimer_ls_en: usb-c0-hbr-ls-en {
			gpios = <&ioex_c0 2 GPIO_OUTPUT_LOW>;
			enum-name = "IOEX_USB_C0_HBR_LS_EN";
			no-auto-init;
		};
		usb_c0_hb_retimer_rst: usb-c0-hbr-rst {
			gpios = <&ioex_c0 3 GPIO_OUTPUT_LOW>;
			enum-name = "IOEX_USB_C0_HBR_RST";
			no-auto-init;
		};
		usb_c1_hb_retimer_ls_en: usb-c1-hbr-ls-en {
			gpios = <&ioex_c1 2 GPIO_OUTPUT_LOW>;
			enum-name = "IOEX_USB_C1_HBR_LS_EN";
			no-auto-init;
		};
		usb_c1_hb_retimer_rst: usb-c1-hbr-rst {
			gpios = <&ioex_c1 3 GPIO_OUTPUT_LOW>;
			enum-name = "IOEX_USB_C1_HBR_RST";
			no-auto-init;
		};
		usb-c0-mux-oe-n {
			gpios = <&ioex_c0 4 GPIO_OUTPUT_LOW>;
			no-auto-init;
		};
		usb-c0-mux-sbu-sel-0 {
			gpios = <&ioex_c0 6 GPIO_OUTPUT_HIGH>;
			enum-name = "IOEX_USB_C0_MUX_SBU_SEL_0";
			no-auto-init;
		};
		usb-c0-mux-sbu-sel-1 {
			gpios = <&ioex_c1 4 GPIO_OUTPUT_LOW>;
			enum-name = "IOEX_USB_C0_MUX_SBU_SEL_1";
			no-auto-init;
		};
		usb-c0-c1-prochot-n {
			gpios = <&ioex_c1 6 GPIO_INPUT>;
			no-auto-init;
		};
		dg-bssb-sbu-sel {
			gpios = <&ioex_c2_port1 4 GPIO_INPUT>;
			no-auto-init;
		};
		usb_c2_hb_retimer_rst: usb-c2-hbr-rst {
			gpios = <&ioex_c2_port1 1 (GPIO_ODR_LOW | \
				GPIO_VOLTAGE_1P8)>;
			enum-name = "IOEX_USB_C2_HBR_RST";
			no-auto-init;
		};
		usb_c2_hb_retimer_ls_en: usb-c2-hbr-ls-en {
			gpios = <&ioex_c2_port2 0 (GPIO_ODR_LOW | \
				GPIO_VOLTAGE_1P8)>;
			enum-name = "IOEX_USB_C2_HBR_LS_EN";
			no-auto-init;
		};
		usb_c3_hb_retimer_rst: usb-c3-hbr-rst {
			gpios = <&ioex_c2_port1 3 (GPIO_ODR_LOW | \
				GPIO_VOLTAGE_1P8)>;
			enum-name = "IOEX_USB_C3_HBR_RST";
			no-auto-init;
		};
		usb_c3_hb_retimer_ls_en: usb-c3-hbr-ls-en {
			gpios = <&ioex_c2_port3 3 (GPIO_ODR_LOW | \
				GPIO_VOLTAGE_1P8)>;
			enum-name = "IOEX_USB_C3_HBR_LS_EN";
			no-auto-init;
		};
		usb-c2-c3-prochot-n {
			gpios = <&ioex_c2_port0 0 GPIO_INPUT>;
			no-auto-init;
		};
		/* unimplemented GPIOs */
		en-pp5000 {
			enum-name = "GPIO_EN_PP5000";
		};
	};
};