/* Copyright 2022 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ / { aliases { i2c-0 = &i2c0_0; i2c-1 = &i2c1_0; i2c-2 = &i2c2_0; i2c-3 = &i2c3_0; i2c-4 = &i2c4_1; i2c-5 = &i2c5_0; i2c-7 = &i2c7_0; }; named-i2c-ports { compatible = "named-i2c-ports"; i2c_power: power { i2c-port = <&i2c0_0>; remote-port = <0>; enum-names = "I2C_PORT_POWER", "I2C_PORT_BATTERY", "I2C_PORT_VIRTUAL_BATTERY", "I2C_PORT_CHARGER"; }; i2c_tcpc0: tcpc0 { i2c-port = <&i2c1_0>; dynamic-speed; enum-names = "I2C_PORT_TCPC0"; }; i2c_tcpc1: tcpc1 { i2c-port = <&i2c2_0>; dynamic-speed; enum-names = "I2C_PORT_TCPC1"; }; rtc { i2c-port = <&i2c4_1>; enum-names = "I2C_PORT_RTC"; }; i2c_eeprom: eeprom { i2c-port = <&i2c5_0>; enum-names = "I2C_PORT_EEPROM"; }; i2c_sensor: sensor { i2c-port = <&i2c7_0>; enum-names = "I2C_PORT_SENSOR", "I2C_PORT_ACCEL"; }; }; }; &i2c0_0 { label = "I2C_POWER"; status = "okay"; clock-frequency = ; pinctrl-0 = <&i2c0_0_sda_scl_gpb4_b5>; pinctrl-names = "default"; bc12_port0: pi3usb9201@5f { compatible = "pericom,pi3usb9201"; status = "okay"; reg = <0x5f>; irq = <&int_usb_c0_bc12>; }; charger: isl923x@9 { compatible = "intersil,isl923x"; status = "okay"; reg = <0x9>; }; }; &i2c_ctrl0 { status = "okay"; }; &i2c1_0 { label = "I2C_USB_C0_PD"; status = "okay"; clock-frequency = ; pinctrl-0 = <&i2c1_0_sda_scl_gp87_90>; pinctrl-names = "default"; }; &i2c_ctrl1 { status = "okay"; }; &i2c2_0 { label = "I2C_USB_C1_PD"; status = "okay"; clock-frequency = ; pinctrl-0 = <&i2c2_0_sda_scl_gp91_92>; pinctrl-names = "default"; }; &i2c_ctrl2 { status = "okay"; }; &i2c3_0 { /* Not used as no WLC connected */ clock-frequency = ; }; &i2c4_1 { label = "I2C_RTC"; status = "okay"; clock-frequency = ; pinctrl-0 = <&i2c4_1_sda_scl_gpf2_f3>; pinctrl-names = "default"; pcf85063a: pcf85063a@51 { compatible = "nxp,rtc-pcf85063a"; reg = <0x51>; int-pin = <&gpio_rtc_ec_wake_odl>; }; }; &i2c_ctrl4 { status = "okay"; }; &i2c5_0 { label = "I2C_EEPROM"; status = "okay"; clock-frequency = ; pinctrl-0 = <&i2c5_0_sda_scl_gp33_36>; pinctrl-names = "default"; bc12_port1: pi3usb9201@5f { compatible = "pericom,pi3usb9201"; status = "okay"; reg = <0x5f>; irq = <&int_usb_c1_bc12>; }; }; &i2c_ctrl5 { status = "okay"; }; &i2c7_0 { label = "I2C_SENSOR"; status = "okay"; clock-frequency = ; pinctrl-0 = <&i2c7_0_sda_scl_gpb2_b3>; pinctrl-names = "default"; }; &i2c_ctrl7 { status = "okay"; };