/* Copyright 2022 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

#include <dt-bindings/motionsense/utils.h>


/ {
	aliases {
		/*
		 * Interrupt bindings for sensor devices.
		 */
		lsm6dso-int = &base_accel;
		lis2dw12-int = &lid_accel;
	};

	/*
	 * Declare mutexes used by sensor drivers.
	 * A mutex node is used to create an instance of mutex_t.
	 * A mutex node is referenced by a sensor node if the
	 * corresponding sensor driver needs to use the
	 * instance of the mutex.
	 */
	motionsense-mutex {
		compatible = "cros-ec,motionsense-mutex";
		lid_mutex: lid-mutex {
			label = "LID_MUTEX";
		};

		base_mutex: base-mutex {
			label = "BASE_MUTEX";
		};
	};

	/* Rotation matrix used by drivers. */
	motionsense-rotation-ref {
		compatible = "cros-ec,motionsense-rotation-ref";
		lid_rot_ref: lid-rotation-ref {
			mat33 = <(-1) 0 0
				 0 1 0
				 0 0 (-1)>;
		};

		base_rot_ref: base-rotation-ref {
			mat33 = <(-1) 0 0
				 0 (-1) 0
				 0 0 1>;
		};
	};

	/*
	 * Driver specific data. A driver-specific data can be shared with
	 * different motion sensors while they are using the same driver.
	 *
	 * If a node's compatible starts with "cros-ec,accelgyro-", it is for
	 * a common structure defined in accelgyro.h.
	 * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for
	 * "struct als_drv_data_t" in accelgyro.h
	 */
	motionsense-sensor-data {
		lsm6dso_data: lsm6dso-drv-data {
			compatible = "cros-ec,drvdata-lsm6dso";
			status = "okay";
		};

		lis2dw12_data: lis2dw12-drv-data {
			compatible = "cros-ec,drvdata-lis2dw12";
			status = "okay";
		};
	};

	/*
	 * List of motion sensors that creates motion_sensors array.
	 * The label "lid_accel" and "base_accel" are used to indicate
	 * motion sensor IDs for lid angle calculation.
	 */
	motionsense-sensor {
		base_accel: base-accel {
			compatible = "cros-ec,lsm6dso-accel";
			status = "okay";

			label = "Base Accel";
			active-mask = "SENSOR_ACTIVE_S0_S3";
			location = "MOTIONSENSE_LOC_BASE";
			mutex = <&base_mutex>;
			port = <&i2c_ec_i2c_sensor>;
			rot-standard-ref = <&base_rot_ref>;
			drv-data = <&lsm6dso_data>;
			configs {
				compatible =
					"cros-ec,motionsense-sensor-config";
				ec-s0 {
					label = "SENSOR_CONFIG_EC_S0";
					odr = <(10000 | ROUND_UP_FLAG)>;
				};
				ec-s3 {
					label = "SENSOR_CONFIG_EC_S3";
					odr = <(10000 | ROUND_UP_FLAG)>;
				};
			};
		};

		base_gyro: base-gyro {
			compatible = "cros-ec,lsm6dso-gyro";
			status = "okay";

			label = "Base Gyro";
			active-mask = "SENSOR_ACTIVE_S0_S3";
			location = "MOTIONSENSE_LOC_BASE";
			mutex = <&base_mutex>;
			port = <&i2c_ec_i2c_sensor>;
			rot-standard-ref = <&base_rot_ref>;
			drv-data = <&lsm6dso_data>;
		};

		lid_accel: lid-accel {
			compatible = "cros-ec,lis2dw12";
			status = "okay";

			label = "Lid Accel";
			active-mask = "SENSOR_ACTIVE_S0_S3";
			location = "MOTIONSENSE_LOC_LID";
			mutex = <&lid_mutex>;
			port = <&i2c_ec_i2c_sensor>;
			rot-standard-ref = <&lid_rot_ref>;
			default-range = <2>;
			drv-data = <&lis2dw12_data>;
			i2c-spi-addr-flags = "LIS2DWL_ADDR0_FLAGS";
			configs {
				compatible =
					"cros-ec,motionsense-sensor-config";
				ec-s0 {
					label = "SENSOR_CONFIG_EC_S0";
					odr = <(10000 | ROUND_UP_FLAG)>;
				};
				ec-s3 {
					label = "SENSOR_CONFIG_EC_S3";
					odr = <(10000 | ROUND_UP_FLAG)>;
				};
			};
		};
	};

	motionsense-sensor-info {
		compatible = "cros-ec,motionsense-sensor-info";

		/*
		 * list of GPIO interrupts that have to
		 * be enabled at initial stage
		 */
		sensor-irqs = <&int_imu>;
		/* list of sensors in force mode */
		accel-force-mode-sensors = <&lid_accel>;
	};
};