# Copyright 2021 The ChromiumOS Authors
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

# Enabling this config will show all I2C traffic, do not commit with this line
# uncommented, it is here to make it easy to find/enable.
# CONFIG_I2C_LOG_LEVEL_DBG=y

CONFIG_ZTEST=y
CONFIG_ZTEST_ASSERT_VERBOSE=1
CONFIG_ZTEST_MOCKING=y
CONFIG_ZTEST_NEW_API=y
CONFIG_ZTEST_PARAMETER_COUNT=24
CONFIG_TEST=y
CONFIG_ASSERT=y
# Do not set CONFIG_ASSERT_TEST=y here, it will mask assert failures.
# Instead set CONFIG_ASSERT_TEST=y only on specific tests that require it.
CONFIG_ASSERT_TEST=n
CONFIG_SHELL_VT100_COMMANDS=n

# Print logs from Zephyr LOG_MODULE to stdout
CONFIG_NATIVE_UART_0_ON_STDINOUT=y

# Simulate 10 ticks per ms
CONFIG_SYS_CLOCK_TICKS_PER_SEC=10000
CONFIG_TASKS_SET_TEST_RUNNER_TID_RULE=y

# Enable exception stack traces for better errors
CONFIG_EXCEPTION_STACK_TRACE=y

# Enable debugging features
CONFIG_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_OPTIMIZATIONS=y
CONFIG_PLATFORM_EC_CONSOLE_DEBUG=y
CONFIG_SHELL_BACKEND_DUMMY=y
CONFIG_SHELL_BACKEND_SERIAL=n
CONFIG_SHELL_HELP=y
# We aren't using the serial console, but there is still a lot of code that
# assumes that a serial port exists.
CONFIG_SERIAL=y
CONFIG_RING_BUFFER=y
CONFIG_PLATFORM_EC_I2C_DEBUG_PASSTHRU=y

CONFIG_PLATFORM_EC=y
CONFIG_CROS_EC=y
CONFIG_SHIMMED_TASKS=y
CONFIG_EMUL=y
CONFIG_GPIO=y
CONFIG_PLATFORM_EC_GPIO_INIT_PRIORITY=49
CONFIG_EEPROM=y
CONFIG_EEPROM_SIMULATOR=n
CONFIG_EMUL_EEPROM_AT2X=y
CONFIG_EMUL_TCPCI_PARTNER_DRP=y
CONFIG_EMUL_TCPCI_PARTNER_FAULTY_EXT=y
CONFIG_PLATFORM_EC_CHARGE_MANAGER=y
CONFIG_PLATFORM_EC_CHARGE_RAMP_SW=y
CONFIG_PLATFORM_EC_CHARGESPLASH=y

CONFIG_PLATFORM_EC_POWERSEQ=y
CONFIG_PLATFORM_EC_CMD_PWR_AVG=y

CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y

CONFIG_PLATFORM_EC_USB_PID=0x5000
CONFIG_PLATFORM_EC_USBC=y
CONFIG_PLATFORM_EC_USB_CHARGER=y
CONFIG_PLATFORM_EC_USB_POWER_DELIVERY=y
CONFIG_PLATFORM_EC_USB_PD_5V_EN_CUSTOM=y
CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y
CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y
CONFIG_PLATFORM_EC_I2C_VIRTUAL_BATTERY=y
CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10
CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=10
CONFIG_PLATFORM_EC_CHARGER_ISL9238=y
CONFIG_PLATFORM_EC_CHIP_INIT_ROM_REGION=y
CONFIG_PLATFORM_EC_USB_PD_VBUS_MEASURE_CHARGER=y
CONFIG_PLATFORM_EC_USB_PD_FRS=y
CONFIG_PLATFORM_EC_USB_PD_FRS_PPC=y
CONFIG_PLATFORM_EC_USB_PD_REV30=y
CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y
CONFIG_PLATFORM_EC_HOSTCMD=y
CONFIG_PLATFORM_EC_USB_PD_TCPM_TUSB422=y
CONFIG_PLATFORM_EC_USB_MUX_RUNTIME_CONFIG=y
CONFIG_PLATFORM_EC_TEMP_SENSOR_POWER=y
CONFIG_PLATFORM_EC_SWITCH=y
CONFIG_PLATFORM_EC_SWITCHCAP_LN9310=y
CONFIG_PLATFORM_EC_ACCEL_BMA255=y
CONFIG_PLATFORM_EC_ACCEL_BMA4XX=y
CONFIG_PLATFORM_EC_ACCELGYRO_BMI160=y
CONFIG_PLATFORM_EC_ACCELGYRO_BMI260=y
CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y
CONFIG_PLATFORM_EC_ACCEL_FIFO=y
CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y
CONFIG_PLATFORM_EC_ALS_TCS3400=y
CONFIG_PLATFORM_EC_USB_PD_DISCHARGE=n
CONFIG_PLATFORM_EC_USB_PD_TCPM_MUX=y
CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8805=y
CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8805_FORCE_DID=y
CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8815=y
CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8815_FORCE_DID=y
CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8745=y
CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8745_FORCE_ID=y
CONFIG_PLATFORM_EC_USB_PD_TCPM_MULTI_PS8XXX=y
CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y
CONFIG_PLATFORM_EC_USB_PD_REQUIRE_AP_MODE_ENTRY=y
CONFIG_PLATFORM_EC_USB_PD_CLEAR_HARD_RESET_STATUS=y
CONFIG_PLATFORM_EC_CONSOLE_CMD_WAITMS=y
CONFIG_PLATFORM_EC_POWER_SLEEP_FAILURE_DETECTION=y
CONFIG_PLATFORM_EC_CHIPSET_RESUME_INIT_HOOK=y

CONFIG_ESPI=y
CONFIG_EMUL_ESPI_HOST=y
CONFIG_ESPI_PERIPHERAL_ACPI_SHM_REGION=y
CONFIG_ESPI_PERIPHERAL_CUSTOM_OPCODE=y
CONFIG_ESPI_PERIPHERAL_EC_HOST_CMD=y

# Things that default to on, but aren't working yet
CONFIG_PLATFORM_EC_BACKLIGHT_LID=n
CONFIG_PLATFORM_EC_VBOOT_HASH=n
CONFIG_PLATFORM_EC_POWERSEQ_INTEL=n
CONFIG_PLATFORM_EC_POWERSEQ_PP5000_CONTROL=n

# USB-C
CONFIG_PLATFORM_EC_USBC_PPC_SYV682C=y
CONFIG_PLATFORM_EC_USBC_PPC_SYV682X=y

# Chipset for Herobrine
CONFIG_AP_ARM_QUALCOMM_SC7280=y
CONFIG_PLATFORM_EC_POWERSEQ_HOST_SLEEP=y

CONFIG_PLATFORM_EC_LID_SWITCH=y
CONFIG_PLATFORM_EC_POWER_BUTTON=y
CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI=y
CONFIG_PLATFORM_EC_PORT80=y
CONFIG_PLATFORM_EC_VSTORE_SLOT_COUNT=2

CONFIG_WATCHDOG=y
CONFIG_WDT_DISABLE_AT_BOOT=y
CONFIG_PLATFORM_EC_USB_PD_HOST_CMD=y
CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_MKBP=y
CONFIG_PLATFORM_EC_MKBP_EVENT=y
CONFIG_PLATFORM_EC_MKBP_USE_GPIO=y
CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y
CONFIG_PLATFORM_EC_KEYBOARD_PWRBTN_ASSERTS_KSI2=y
CONFIG_FLASH=y
CONFIG_PLATFORM_EC_VBOOT_HASH=y
CONFIG_PLATFORM_EC_CONSOLE_CMD_CHARGER_ADC_AMON_BMON=y
CONFIG_PLATFORM_EC_CHARGER_PSYS=y
CONFIG_PLATFORM_EC_CHARGER_PSYS_READ=y
CONFIG_PLATFORM_EC_CHARGE_RAMP_HW=y

CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y
CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y

CONFIG_PLATFORM_EC_ACCEL_SPOOF_MODE=y
CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_SPOOF=y

CONFIG_PLATFORM_EC_CONSOLE_CMD_MD=y

CONFIG_PLATFORM_EC_LID_ANGLE=y
CONFIG_PLATFORM_EC_TABLET_MODE=y

# Power Management (Herobrine arch enables this)
CONFIG_PM=y

CONFIG_INPUT=y