summaryrefslogtreecommitdiff
path: root/README
blob: 76a10b185204dfb98d82776ad771f25ddaaf8c8b (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
- EC Lib

This wraps Blizzard driverlib and implements the EC chip interface defined
by Google. See below diagram for architecture.


  +--------------------+
  |   Host BIOS/OS     |
  +--------------------+

 ---- host interface ----

  +--------------------+
  | Google EC features |
  +--------------------+

 ---- chip interface ----  The interface is defined in
                           src/platform/ec/chip_interface/*.
  +--------------------+   But the real implementation is in EC Lib.
  |       EC Lib       |
  +--------------------+
  | Blizzard low level |
  |   driver, the      |
  |   driverlib.       |
  +--------------------+


Build Options
=============

- CONFIG_WATCHDOG_HELP

	Try to detect a watchdog that is about to fire, and print a trace.
	This is needed on STM32, where the independent watchdog has no early
	warning feature and the windowed watchdog has a very short period.

- CONFIG_PANIC_HELP

	Report extra information about a panic, such as the fault address,
	here shown as bfar. This shows the reason for the fault and may help
	to determine the cause.

	=== EXCEPTION: 03 ====== xPSR: 01000000 ===========
	r0 :0000000b r1 :00000047 r2 :60000000 r3 :200013dd
	r4 :00000000 r5 :080053f4 r6 :200013d0 r7 :00000002
	r8 :00000000 r9 :200013de r10:00000000 r11:00000000
	r12:00000000 sp :200009a0 lr :08002b85 pc :08003a8a
	Precise data bus error, Forced hard fault, Vector catch, bfar = 60000000
	mmfs = 00008200, shcsr = 00000000, hfsr = 40000000, dfsr = 00000008

- CONFIG_ASSERT_HELP

	Report assertion failures in a vebose manner to aid debugging. When
	enabled an ASSERT() which fails will produce message in the form:

		ASSERTION FAILURE '<expr>' in function() at file:line

- CONFIG_CONFIGURE_BOARD_LATE

	Define this to call configure_board_late() after initial system init
	is complete (and after GPIOs are set up).

- CONFIG_AC_POWER_STATUS

	Monitor the state of the AC power input and drive out a GPIO to
	the AP indicating this state. The GPIO will be driven low when
	AC power is not connected, and high when it is connected. This
	uses GPIO_AC_STATUS for this purpose.

- CONFIG_PMU_FORCE_FET

	Force switching on and off the FETs on the PMU controlling various
	power rails during AP startup and shutdown sequences.
	This is mainly useful for bringup when we don't have the corresponding
	sequences in the AP code.