summaryrefslogtreecommitdiff
path: root/README
blob: 700adcc624231fe9a7969565f25b2f0071c67741 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
- EC Lib

This wraps Blizzard driverlib and implements the EC chip interface defined
by Google. See below diagram for architecture.


  +--------------------+
  |   Host BIOS/OS     |
  +--------------------+

 ---- host interface ----

  +--------------------+
  | Google EC features |
  +--------------------+

 ---- chip interface ----  The interface is defined in
                           src/platform/ec/chip_interface/*.
  +--------------------+   But the real implementation is in EC Lib.
  |       EC Lib       |
  +--------------------+
  | Blizzard low level |
  |   driver, the      |
  |   driverlib.       |
  +--------------------+


Build Options
=============

- CONFIG_WATCHDOG_HELP

	Try to detect a watchdog that is about to fire, and print a trace.
	This is needed on STM32, where the independent watchdog has no early
	warning feature and the windowed watchdog has a very short period.

- CONFIG_PANIC_HELP

	Report extra information about a panic, such as the fault address,
	here shown as bfar. This shows the reason for the fault and may help
	to determine the cause.

	=== EXCEPTION: 03 ====== xPSR: 01000000 ===========
	r0 :0000000b r1 :00000047 r2 :60000000 r3 :200013dd
	r4 :00000000 r5 :080053f4 r6 :200013d0 r7 :00000002
	r8 :00000000 r9 :200013de r10:00000000 r11:00000000
	r12:00000000 sp :200009a0 lr :08002b85 pc :08003a8a
	Precise data bus error, Forced hard fault, Vector catch, bfar = 60000000
	mmfs = 00008200, shcsr = 00000000, hfsr = 40000000, dfsr = 00000008

- CONFIG_ASSERT_HELP

	Report assertion failures in a vebose manner to aid debugging. When
	enabled an ASSERT() which fails will produce message in the form:

		ASSERTION FAILURE '<expr>' in function() at file:line

- CONFIG_CONFIGURE_BOARD_LATE

	Define this to call configure_board_late() after initial system init
	is complete (and after GPIOs are set up).

- CONFIG_AC_POWER_STATUS

	Monitor the state of the AC power input and drive out a GPIO to
	the AP indicating this state. The GPIO will be driven low when
	AC power is not connected, and high when it is connected. This
	uses GPIO_AC_STATUS for this purpose.