summaryrefslogtreecommitdiff
path: root/board/atlas/board.c
blob: 64bd8f11711d9628848eb6eabab9a3492b81bfb1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
/* Copyright 2018 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Atlas board-specific configuration */

#include "adc_chip.h"
#include "bd99992gw.h"
#include "board_config.h"
#include "charge_manager.h"
#include "charger.h"
#include "charge_state.h"
#include "chipset.h"
#include "console.h"
#include "driver/als_opt3001.h"
#include "driver/pmic_bd99992gw.h"
#include "driver/charger/isl923x.h"
#include "driver/tcpm/ps8xxx.h"
#include "driver/tcpm/tcpci.h"
#include "driver/tcpm/tcpm.h"
#include "espi.h"
#include "extpower.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "i2c.h"
#include "keyboard_8042_sharedlib.h"
#include "keyboard_scan.h"
#include "lid_switch.h"
#include "motion_sense.h"
#include "power_button.h"
#include "power.h"
#include "pwm_chip.h"
#include "pwm.h"
#include "spi.h"
#include "switch.h"
#include "system.h"
#include "system_chip.h"
#include "task.h"
#include "temp_sensor.h"
#include "timer.h"
#include "uart.h"
#include "usb_mux.h"
#include "usb_pd.h"
#include "usb_pd_tcpm.h"
#include "util.h"

#define CPRINTS(format, args...) cprints(CC_SYSTEM, format, ## args)
#define CPRINTF(format, args...) cprintf(CC_SYSTEM, format, ## args)

static void tcpc_alert_event(enum gpio_signal signal)
{
	int port = -1;

	switch (signal) {
	case GPIO_USB_C0_PD_INT_ODL:
		port = 0;
		break;
	case GPIO_USB_C1_PD_INT_ODL:
		port = 1;
		break;
	default:
		return;
	}

	schedule_deferred_pd_interrupt(port);
}

#include "gpio_list.h"

/* Keyboard scan. Increase output_settle_us to 80us from default 50us. */
struct keyboard_scan_config keyscan_config = {
	.output_settle_us = 80,
	.debounce_down_us = 9 * MSEC,
	.debounce_up_us = 30 * MSEC,
	.scan_period_us = 3 * MSEC,
	.min_post_scan_delay_us = 1000,
	.poll_timeout_us = 100 * MSEC,
	.actual_key_mask = {
		0x3c, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
	},
};

/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
const struct pwm_t pwm_channels[] = {
	[PWM_CH_KBLIGHT]       = { 3, 0, 10000 },
	[PWM_CH_DB0_LED_BLUE]  = {
		0, PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP, 2400 },
	[PWM_CH_DB0_LED_RED]   = {
		2, PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP, 2400 },
	[PWM_CH_DB0_LED_GREEN] = {
		6, PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP, 2400 },
	[PWM_CH_DB1_LED_BLUE]  = {
		1, PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP, 2400 },
	[PWM_CH_DB1_LED_RED]   = {
		7, PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP, 2400 },
	[PWM_CH_DB1_LED_GREEN] = {
		5, PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP, 2400 },
};
BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);

/* Hibernate wake configuration */
const enum gpio_signal hibernate_wake_pins[] = {
	GPIO_ROP_EC_ACOK,
	GPIO_LID_OPEN,
	GPIO_MECH_PWR_BTN_ODL,
};
const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins);

const struct adc_t adc_channels[] = {
	/*
	 * Adapter current output or battery charging/discharging current (uV)
	 * 18x amplification on charger side.
	 */
	[ADC_AMON_BMON] = {
		"AMON_BMON",
		NPCX_ADC_CH2,
		ADC_MAX_VOLT*1000/18,
		ADC_READ_MAX+1,
		0
	},
	/*
	 * ISL9238 PSYS output is 1.44 uA/W over 12.4K resistor, to read
	 * 0.8V @ 45 W, i.e. 56250 uW/mV. Using ADC_MAX_VOLT*56250 and
	 * ADC_READ_MAX+1 as multiplier/divider leads to overflows, so we
	 * only divide by 2 (enough to avoid precision issues).
	 */
	[ADC_PSYS] = {
		"PSYS",
		NPCX_ADC_CH3,
		ADC_MAX_VOLT*56250*2/(ADC_READ_MAX+1),
		2,
		0
	},
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);

/* I2C port map */
const struct i2c_port_t i2c_ports[]  = {
	{"power",   I2C_PORT_POWER,   100,
	 GPIO_EC_I2C0_POWER_SCL,      GPIO_EC_I2C0_POWER_SDA},
	{"tcpc0",   I2C_PORT_TCPC0,   1000,
	 GPIO_EC_I2C1_USB_C0_SCL,     GPIO_EC_I2C1_USB_C0_SDA},
	{"tcpc1",   I2C_PORT_TCPC1,   1000,
	 GPIO_EC_I2C2_USB_C1_SCL,     GPIO_EC_I2C2_USB_C1_SDA},
	{"sensor",  I2C_PORT_SENSOR,  100,
	 GPIO_EC_I2C3_SENSOR_3V3_SCL, GPIO_EC_I2C3_SENSOR_3V3_SDA},
	{"battery", I2C_PORT_BATTERY, 100,
	 GPIO_EC_I2C4_BATTERY_SCL,    GPIO_EC_I2C4_BATTERY_SDA},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);

/* Charger Chips */
const struct charger_config_t chg_chips[] = {
	{
		.i2c_port = I2C_PORT_CHARGER,
		.i2c_addr_flags = ISL923X_ADDR_FLAGS,
		.drv = &isl923x_drv,
	},
};

const unsigned int chg_cnt = ARRAY_SIZE(chg_chips);

/* TCPC mux configuration */
const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
	{
		/* left port */
		.bus_type = EC_BUS_TYPE_I2C,
		.i2c_info = {
			.port = I2C_PORT_TCPC0,
			.addr_flags = I2C_ADDR_TCPC_FLAGS,
		},
		.drv = &ps8xxx_tcpm_drv,
		/* Alert is active-low, push-pull */
		.flags = 0,
	},
	{
		/* right port */
		.bus_type = EC_BUS_TYPE_I2C,
		.i2c_info = {
			.port = I2C_PORT_TCPC1,
			.addr_flags = I2C_ADDR_TCPC_FLAGS,
		},
		.drv = &ps8xxx_tcpm_drv,
		/* Alert is active-low, push-pull */
		.flags = 0,
	},
};

const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
	{
		.usb_port = 0,
		.driver = &tcpci_tcpm_usb_mux_driver,
		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
	},
	{
		.usb_port = 1,
		.driver = &tcpci_tcpm_usb_mux_driver,
		.hpd_update = &ps8xxx_tcpc_update_hpd_status,
	},
};

void board_reset_pd_mcu(void)
{
	gpio_set_level(GPIO_USB_PD_RST_L, 0);
	msleep(PS8XXX_RST_L_RST_H_DELAY_MS);
	gpio_set_level(GPIO_USB_PD_RST_L, 1);
}

void board_tcpc_init(void)
{
	/* Only reset TCPC if not sysjump */
	if (!system_jumped_late())
		board_reset_pd_mcu();

	gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
	gpio_enable_interrupt(GPIO_USB_C1_PD_INT_ODL);

	/*
	 * Initialize HPD to low; after sysjump SOC needs to see
	 * HPD pulse to enable video path
	 */
	for (int port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port)
		usb_mux_hpd_update(port, 0, 0);
}
DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C+1);

uint16_t tcpc_get_alert_status(void)
{
	uint16_t status = 0;

	if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL)) {
		if (gpio_get_level(GPIO_USB_C0_PD_RST_L))
			status |= PD_STATUS_TCPC_ALERT_0;
	}

	if (!gpio_get_level(GPIO_USB_C1_PD_INT_ODL)) {
		if (gpio_get_level(GPIO_USB_C1_PD_RST_L))
			status |= PD_STATUS_TCPC_ALERT_1;
	}

	return status;
}

const struct temp_sensor_t temp_sensors[] = {
	{"Battery", TEMP_SENSOR_TYPE_BATTERY, charge_get_battery_temp, 0},
	/* BD99992GW temp sensors are only readable in S0 */
	{"Ambient", TEMP_SENSOR_TYPE_BOARD, bd99992gw_get_val,
	 BD99992GW_ADC_CHANNEL_SYSTHERM0},
	{"Charger", TEMP_SENSOR_TYPE_BOARD, bd99992gw_get_val,
	 BD99992GW_ADC_CHANNEL_SYSTHERM1},
	{"DRAM", TEMP_SENSOR_TYPE_BOARD, bd99992gw_get_val,
	 BD99992GW_ADC_CHANNEL_SYSTHERM2},
	{"eMMC", TEMP_SENSOR_TYPE_BOARD, bd99992gw_get_val,
	 BD99992GW_ADC_CHANNEL_SYSTHERM3},
};
BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);

/*
 * Check if PMIC fault registers indicate VR fault. If yes, print out fault
 * register info to console. Additionally, set panic reason so that the OS can
 * check for fault register info by looking at offset 0x14(PWRSTAT1) and
 * 0x15(PWRSTAT2) in cros ec panicinfo.
 */
static void board_report_pmic_fault(const char *str)
{
	int vrfault, pwrstat1 = 0, pwrstat2 = 0;
	uint32_t info;

	/* RESETIRQ1 -- Bit 4: VRFAULT */
	if (i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		      BD99992GW_REG_RESETIRQ1, &vrfault) != EC_SUCCESS)
		return;

	if (!(vrfault & BIT(4)))
		return;

	/* VRFAULT has occurred, print VRFAULT status bits. */

	/* PWRSTAT1 */
	i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		  BD99992GW_REG_PWRSTAT1, &pwrstat1);

	/* PWRSTAT2 */
	i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		  BD99992GW_REG_PWRSTAT2, &pwrstat2);

	CPRINTS("PMIC VRFAULT: %s", str);
	CPRINTS("PMIC VRFAULT: PWRSTAT1=0x%02x PWRSTAT2=0x%02x", pwrstat1,
		pwrstat2);

	/* Clear all faults -- Write 1 to clear. */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_RESETIRQ1, BIT(4));
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_PWRSTAT1, pwrstat1);
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_PWRSTAT2, pwrstat2);

	/*
	 * Status of the fault registers can be checked in the OS by looking at
	 * offset 0x14(PWRSTAT1) and 0x15(PWRSTAT2) in cros ec panicinfo.
	 */
	info = ((pwrstat2 & 0xFF) << 8) | (pwrstat1 & 0xFF);
	panic_set_reason(PANIC_SW_PMIC_FAULT, info, 0);
}

static void board_pmic_disable_slp_s0_vr_decay(void)
{
	/*
	 * VCCIOCNT:
	 * Bit 6    (0)   - Disable decay of VCCIO on SLP_S0# assertion
	 * Bits 5:4 (11)  - Nominal output voltage: 0.850V
	 * Bits 3:2 (10)  - VR set to AUTO on SLP_S0# de-assertion
	 * Bits 1:0 (10)  - VR set to AUTO operating mode
	 */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_VCCIOCNT, 0x3a);

	/*
	 * V18ACNT:
	 * Bits 7:6 (00) - Disable low power mode on SLP_S0# assertion
	 * Bits 5:4 (10) - Nominal voltage set to 1.8V
	 * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion
	 * Bits 1:0 (10) - VR set to AUTO operating mode
	 */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_V18ACNT, 0x2a);

	/*
	 * V085ACNT:
	 * Bits 7:6 (00) - Disable low power mode on SLP_S0# assertion
	 * Bits 5:4 (10) - Nominal voltage 0.85V
	 * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion
	 * Bits 1:0 (10) - VR set to AUTO operating mode
	 */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_V085ACNT, 0x2a);
}

static void board_pmic_enable_slp_s0_vr_decay(void)
{
	/*
	 * VCCIOCNT:
	 * Bit 6    (1)   - Enable decay of VCCIO on SLP_S0# assertion
	 * Bits 5:4 (11)  - Nominal output voltage: 0.850V
	 * Bits 3:2 (10)  - VR set to AUTO on SLP_S0# de-assertion
	 * Bits 1:0 (10)  - VR set to AUTO operating mode
	 */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_VCCIOCNT, 0x7a);

	/*
	 * V18ACNT:
	 * Bits 7:6 (01) - Enable low power mode on SLP_S0# assertion
	 * Bits 5:4 (10) - Nominal voltage set to 1.8V
	 * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion
	 * Bits 1:0 (10) - VR set to AUTO operating mode
	 */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_V18ACNT, 0x6a);

	/*
	 * V085ACNT:
	 * Bits 7:6 (01) - Enable low power mode on SLP_S0# assertion
	 * Bits 5:4 (10) - Nominal voltage 0.85V
	 * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion
	 * Bits 1:0 (10) - VR set to AUTO operating mode
	 */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_V085ACNT, 0x6a);
}

__override void power_board_handle_host_sleep_event(
		enum host_sleep_event state)
{
	if (state == HOST_SLEEP_EVENT_S0IX_SUSPEND)
		board_pmic_enable_slp_s0_vr_decay();
	else if (state == HOST_SLEEP_EVENT_S0IX_RESUME)
		board_pmic_disable_slp_s0_vr_decay();
}

static void board_pmic_init(void)
{
	board_report_pmic_fault("SYSJUMP");

	/* Clear power source events */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_PWRSRCINT, 0xff);

	/* Disable power button shutdown timer */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_PBCONFIG, 0x00);

	if (system_jumped_late())
		return;

	/* DISCHGCNT1 - enable 100 ohm discharge on VCCIO */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_DISCHGCNT1, 0x01);

	/*
	 * DISCHGCNT2 - enable 100 ohm discharge on
	 * V5.0A, V3.3DSW, V3.3A and V1.8A
	 */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_DISCHGCNT2, 0x55);

	/*
	 * DISCHGCNT3 - enable 500 ohm discharge on
	 * V1.8U_2.5U
	 * DISCHGCNT3 - enable 100 ohm discharge on
	 * V12U, V1.00A, V0.85A
	 */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_DISCHGCNT3, 0xd5);

	/* DISCHGCNT4 - enable 100 ohm discharge on V33S, V18S, V100S */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_DISCHGCNT4, 0x15);

	/* VRMODECTRL - disable low-power mode for all rails */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_VRMODECTRL, 0x1f);

	/* V5ADS3CNT - boost V5A_DS3 by 2% */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_V5ADS3CNT, 0x1a);

	board_pmic_disable_slp_s0_vr_decay();
}
DECLARE_HOOK(HOOK_INIT, board_pmic_init, HOOK_PRIO_DEFAULT);

void board_hibernate(void)
{
	int p;

	/* Configure PSL pins */
	for (p = 0; p < hibernate_wake_pins_used; p++)
		system_config_psl_mode(hibernate_wake_pins[p]);

	/*
	 * Enter PSL mode.  Note that on Atlas, simply enabling PSL mode does
	 * not cut the EC's power.  Therefore, we'll need to cut off power via
	 * the ROP PMIC afterwards.
	 */
	system_enter_psl_mode();

	/* Cut off DSW power via the ROP PMIC. */
	i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS,
		   BD99992GW_REG_SDWNCTRL, BD99992GW_SDWNCTRL_SWDN);

	/* Wait for power to be cut. */
	while (1)
		;
}

/* Initialize board. */
static void board_init(void)
{
	if (system_get_board_version() < ATLAS_REV_FIXED_EC_WP) {
		int dflags;

		CPRINTS("Applying EC_WP_L workaround");
		dflags = gpio_get_default_flags(GPIO_EC_WP_L);
		gpio_set_flags(GPIO_EC_WP_L, dflags | GPIO_PULL_UP);
	}

	/* Provide AC status to the PCH */
	gpio_set_level(GPIO_PCH_ACOK, extpower_is_present());
}
DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);

static void board_extpower(void)
{
	gpio_set_level(GPIO_PCH_ACOK, extpower_is_present());
}
DECLARE_HOOK(HOOK_AC_CHANGE, board_extpower, HOOK_PRIO_DEFAULT);

/**
 * Set active charge port -- only one port can be active at a time.
 *
 * @param charge_port   Charge port to enable.
 *
 * Returns EC_SUCCESS if charge port is accepted and made active,
 * EC_ERROR_* otherwise.
 */
int board_set_active_charge_port(int charge_port)
{
	/* charge port is a physical port */
	int is_real_port = (charge_port >= 0 &&
			    charge_port < CONFIG_USB_PD_PORT_MAX_COUNT);
	/* check if we are sourcing VBUS on the port */
	int is_source = gpio_get_level(charge_port == 0 ?
			GPIO_USB_C0_5V_EN : GPIO_USB_C1_5V_EN);

	if (is_real_port && is_source) {
		CPRINTS("No charging from p%d", charge_port);
		return EC_ERROR_INVAL;
	}

	CPRINTS("New chg p%d", charge_port);

	if (charge_port == CHARGE_PORT_NONE) {
		/* Disable both ports */
		gpio_set_level(GPIO_EN_USB_C0_CHARGE_L, 1);
		gpio_set_level(GPIO_EN_USB_C1_CHARGE_L, 1);
	} else {
		/* Make sure non-charging port is disabled */
		gpio_set_level(charge_port ? GPIO_EN_USB_C0_CHARGE_L :
					     GPIO_EN_USB_C1_CHARGE_L, 1);
		/* Enable charging port */
		gpio_set_level(charge_port ? GPIO_EN_USB_C1_CHARGE_L :
					     GPIO_EN_USB_C0_CHARGE_L, 0);
	}

	return EC_SUCCESS;
}

/*
 * Limit the input current to 95% negotiated limit,
 * to account for the charger chip margin.
 */

static int charger_derate(int current)
{
	return current * 95 / 100;
}

static void board_charger_init(void)
{
	charger_set_input_current(CHARGER_SOLO, charger_derate
				  (PD_MAX_CURRENT_MA));
}
DECLARE_HOOK(HOOK_INIT, board_charger_init, HOOK_PRIO_DEFAULT);

/**
 * Set the charge limit based upon desired maximum.
 *
 * @param port          Port number.
 * @param supplier      Charge supplier type.
 * @param charge_ma     Desired charge limit (mA).
 * @param charge_mv     Negotiated charge voltage (mV).
 */
void board_set_charge_limit(int port, int supplier, int charge_ma,
			    int max_ma, int charge_mv)
{
	charge_ma = charger_derate(charge_ma);
	charge_set_input_current_limit(MAX(charge_ma,
				   CONFIG_CHARGER_INPUT_CURRENT), charge_mv);
}

static void board_chipset_suspend(void)
{
	gpio_set_level(GPIO_KBD_BL_EN, 0);
}
DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT);

static void board_chipset_resume(void)
{
	gpio_set_level(GPIO_KBD_BL_EN, 1);
}
DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT);

static void board_chipset_reset(void)
{
	board_report_pmic_fault("CHIPSET RESET");
}
DECLARE_HOOK(HOOK_CHIPSET_RESET, board_chipset_reset, HOOK_PRIO_DEFAULT);

int board_get_version(void)
{
	static int ver;

	if (!ver) {
		/*
		 * Read the board EC ID on the tristate strappings
		 * using ternary encoding: 0 = 0, 1 = 1, Hi-Z = 2
		 */
		uint8_t id0, id1, id2;

		id0 = gpio_get_ternary(GPIO_BOARD_VERSION1);
		id1 = gpio_get_ternary(GPIO_BOARD_VERSION2);
		id2 = gpio_get_ternary(GPIO_BOARD_VERSION3);

		ver = (id2 * 9) + (id1 * 3) + id0;
		CPRINTS("Board ID = %d", ver);
	}

	return ver;
}

static struct opt3001_drv_data_t g_opt3001_data = {
	.scale = 1,
	.uscale = 0,
	.offset = 0,
};

struct motion_sensor_t motion_sensors[] = {
	[LID_ALS] = {
		.name = "Light",
		.active_mask = SENSOR_ACTIVE_S0,
		.chip = MOTIONSENSE_CHIP_OPT3001,
		.type = MOTIONSENSE_TYPE_LIGHT,
		.location = MOTIONSENSE_LOC_LID,
		.drv = &opt3001_drv,
		.drv_data = &g_opt3001_data,
		.port = I2C_PORT_SENSOR,
		.i2c_spi_addr_flags = OPT3001_I2C_ADDR_FLAGS,
		.rot_standard_ref = NULL,
		.default_range = 0x2b11a1, /* from nocturne */
		.min_frequency = OPT3001_LIGHT_MIN_FREQ,
		.max_frequency = OPT3001_LIGHT_MAX_FREQ,
		.config = {
			/* Sensor on in S0 */
			[SENSOR_CONFIG_EC_S0] = {
				.odr = 1000,
			},
		},
	},
};
const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);

/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
const struct motion_sensor_t *motion_als_sensors[] = {
	&motion_sensors[LID_ALS],
};
BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);