1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
|
/* Copyright 2020 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Volteer board-specific configuration */
#include "bb_retimer.h"
#include "button.h"
#include "common.h"
#include "accelgyro.h"
#include "cbi_ec_fw_config.h"
#include "driver/accel_bma2x2.h"
#include "driver/accelgyro_bmi260.h"
#include "driver/als_tcs3400.h"
#include "driver/bc12/pi3usb9201.h"
#include "driver/ppc/sn5s330.h"
#include "driver/ppc/syv682x.h"
#include "driver/retimer/bb_retimer.h"
#include "driver/sync.h"
#include "driver/tcpm/ps8xxx.h"
#include "driver/tcpm/rt1715.h"
#include "driver/tcpm/tcpci.h"
#include "driver/tcpm/tusb422.h"
#include "extpower.h"
#include "fan.h"
#include "fan_chip.h"
#include "gpio.h"
#include "hooks.h"
#include "keyboard_raw.h"
#include "keyboard_scan.h"
#include "lid_switch.h"
#include "power.h"
#include "power_button.h"
#include "pwm.h"
#include "pwm_chip.h"
#include "switch.h"
#include "system.h"
#include "task.h"
#include "tablet_mode.h"
#include "throttle_ap.h"
#include "uart.h"
#include "usb_mux.h"
#include "usb_pd.h"
#include "usb_pd_tbt.h"
#include "usb_pd_tcpm.h"
#include "usbc_ppc.h"
#include "util.h"
#include "gpio_list.h" /* Must come after other header files. */
#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)
/* Keyboard scan setting */
__override struct keyboard_scan_config keyscan_config = {
/* Increase from 50 us, because KSO_02 passes through the H1. */
.output_settle_us = 80,
/* Other values should be the same as the default configuration. */
.debounce_down_us = 9 * MSEC,
.debounce_up_us = 30 * MSEC,
.scan_period_us = 3 * MSEC,
.min_post_scan_delay_us = 1000,
.poll_timeout_us = 100 * MSEC,
.actual_key_mask = {
0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca /* full set */
},
};
/******************************************************************************/
/*
* FW_CONFIG defaults for Volteer if the CBI data is not initialized.
*/
union volteer_cbi_fw_config fw_config_defaults = {
.usb_db = DB_USB4_GEN2,
};
static void board_init(void)
{
/* Illuminate motherboard and daughter board LEDs equally to start. */
pwm_enable(PWM_CH_LED4_SIDESEL, 1);
pwm_set_duty(PWM_CH_LED4_SIDESEL, 50);
}
DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
/******************************************************************************/
/* Physical fans. These are logically separate from pwm_channels. */
const struct fan_conf fan_conf_0 = {
.flags = FAN_USE_RPM_MODE,
.ch = MFT_CH_0, /* Use MFT id to control fan */
.pgood_gpio = -1,
.enable_gpio = GPIO_EN_PP5000_FAN,
};
/* Default */
const struct fan_rpm fan_rpm_0 = {
.rpm_min = 3000,
.rpm_start = 3000,
.rpm_max = 10000,
};
const struct fan_t fans[FAN_CH_COUNT] = {
[FAN_CH_0] = {
.conf = &fan_conf_0,
.rpm = &fan_rpm_0,
},
};
/******************************************************************************/
/* EC thermal management configuration */
const static struct ec_thermal_config thermal_cpu = {
.temp_host = {
[EC_TEMP_THRESH_HIGH] = C_TO_K(70),
[EC_TEMP_THRESH_HALT] = C_TO_K(80),
},
.temp_host_release = {
[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
},
.temp_fan_off = C_TO_K(15),
.temp_fan_max = C_TO_K(50),
};
/*
* Inductor limits - used for both charger and PP3300 regulator
*
* Need to use the lower of the charger IC, PP3300 regulator, and the inductors
*/
const static struct ec_thermal_config thermal_inductor = {
.temp_host = {
[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
[EC_TEMP_THRESH_HALT] = C_TO_K(80),
},
.temp_host_release = {
[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
},
.temp_fan_off = C_TO_K(15),
.temp_fan_max = C_TO_K(55),
};
struct ec_thermal_config thermal_params[] = {
[TEMP_SENSOR_1_CHARGER] = thermal_inductor,
[TEMP_SENSOR_2_PP3300_REGULATOR] = thermal_inductor,
[TEMP_SENSOR_3_DDR_SOC] = thermal_cpu,
[TEMP_SENSOR_4_FAN] = thermal_cpu,
};
BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
/******************************************************************************/
/* MFT channels. These are logically separate from pwm_channels. */
const struct mft_t mft_channels[] = {
[MFT_CH_0] = {
.module = NPCX_MFT_MODULE_1,
.clk_src = TCKC_LFCLK,
.pwm_id = PWM_CH_FAN,
},
};
BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
/******************************************************************************/
/* I2C port map configuration */
const struct i2c_port_t i2c_ports[] = {
{
.name = "sensor",
.port = I2C_PORT_SENSOR,
.kbps = 400,
.scl = GPIO_EC_I2C0_SENSOR_SCL,
.sda = GPIO_EC_I2C0_SENSOR_SDA,
},
{
.name = "usb_c0",
.port = I2C_PORT_USB_C0,
.kbps = 1000,
.scl = GPIO_EC_I2C1_USB_C0_SCL,
.sda = GPIO_EC_I2C1_USB_C0_SDA,
},
{
.name = "usb_c1",
.port = I2C_PORT_USB_C1,
.kbps = 1000,
.scl = GPIO_EC_I2C2_USB_C1_SCL,
.sda = GPIO_EC_I2C2_USB_C1_SDA,
},
{
.name = "usb_1_mix",
.port = I2C_PORT_USB_1_MIX,
.kbps = 100,
.scl = GPIO_EC_I2C3_USB_1_MIX_SCL,
.sda = GPIO_EC_I2C3_USB_1_MIX_SDA,
},
{
.name = "power",
.port = I2C_PORT_POWER,
.kbps = 100,
.scl = GPIO_EC_I2C5_BATTERY_SCL,
.sda = GPIO_EC_I2C5_BATTERY_SDA,
},
{
.name = "eeprom",
.port = I2C_PORT_EEPROM,
.kbps = 400,
.scl = GPIO_EC_I2C7_EEPROM_PWR_SCL_R,
.sda = GPIO_EC_I2C7_EEPROM_PWR_SDA_R,
},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
/******************************************************************************/
/* PWM configuration */
const struct pwm_t pwm_channels[] = {
[PWM_CH_LED1_BLUE] = {
.channel = 2,
.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
.freq = 4800,
},
[PWM_CH_LED2_GREEN] = {
.channel = 0,
.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
.freq = 4800,
},
[PWM_CH_LED3_RED] = {
.channel = 1,
.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
.freq = 4800,
},
[PWM_CH_LED4_SIDESEL] = {
.channel = 7,
.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
/*
* If using the side select to run both LEDs at the same time,
* the frequency should be 1/2 of the color channel PWM
* frequency to drive each LED equally.
*/
.freq = 2400,
},
[PWM_CH_FAN] = {
.channel = 5,
.flags = PWM_CONFIG_OPEN_DRAIN,
.freq = 25000
},
[PWM_CH_KBLIGHT] = {
.channel = 3,
.flags = 0,
/*
* Set PWM frequency to multiple of 50 Hz and 60 Hz to prevent
* flicker. Higher frequencies consume similar average power to
* lower PWM frequencies, but higher frequencies record a much
* lower maximum power.
*/
.freq = 2400,
},
};
BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
/******************************************************************************/
/* Volteer specific USB daughter-board configuration */
/* USBC TCPC configuration for USB3 daughter board */
static const struct tcpc_config_t tcpc_config_p1_usb3 = {
.bus_type = EC_BUS_TYPE_I2C,
.i2c_info = {
.port = I2C_PORT_USB_C1,
.addr_flags = PS8751_I2C_ADDR1_FLAGS,
},
.flags = TCPC_FLAGS_TCPCI_REV2_0 | TCPC_FLAGS_TCPCI_REV2_0_NO_VSAFE0V,
.drv = &ps8xxx_tcpm_drv,
};
/*
* USB3 DB mux configuration - the top level mux still needs to be set to the
* virtual_usb_mux_driver so the AP gets notified of mux changes and updates
* the TCSS configuration on state changes.
*/
static const struct usb_mux usbc1_usb3_db_retimer = {
.usb_port = USBC_PORT_C1,
.driver = &tcpci_tcpm_usb_mux_driver,
.hpd_update = &ps8xxx_tcpc_update_hpd_status,
.next_mux = NULL,
};
static const struct usb_mux mux_config_p1_usb3_active = {
.usb_port = USBC_PORT_C1,
.driver = &virtual_usb_mux_driver,
.hpd_update = &virtual_hpd_update,
.next_mux = &usbc1_usb3_db_retimer,
};
static const struct usb_mux mux_config_p1_usb3_passive = {
.usb_port = USBC_PORT_C1,
.driver = &virtual_usb_mux_driver,
.hpd_update = &virtual_hpd_update,
};
/******************************************************************************/
/* USB-A charging control */
const int usb_port_enable[USB_PORT_COUNT] = {
GPIO_EN_PP5000_USBA,
};
static void ps8815_reset(void)
{
int val;
gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 0);
msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS,
PS8815_PWR_H_RST_H_DELAY_MS));
gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 1);
msleep(PS8815_FW_INIT_DELAY_MS);
/*
* b/144397088
* ps8815 firmware 0x01 needs special configuration
*/
CPRINTS("%s: patching ps8815 registers", __func__);
if (i2c_read8(I2C_PORT_USB_C1,
PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS)
CPRINTS("ps8815: reg 0x0f was %02x", val);
if (i2c_write8(I2C_PORT_USB_C1,
PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, 0x31) == EC_SUCCESS)
CPRINTS("ps8815: reg 0x0f set to 0x31");
if (i2c_read8(I2C_PORT_USB_C1,
PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS)
CPRINTS("ps8815: reg 0x0f now %02x", val);
}
void board_reset_pd_mcu(void)
{
enum ec_cfg_usb_db_type usb_db = ec_cfg_usb_db_type();
/* No reset available for TCPC on port 0 */
/* Daughterboard specific reset for port 1 */
if (usb_db == DB_USB3_ACTIVE) {
ps8815_reset();
usb_mux_hpd_update(USBC_PORT_C1, 0, 0);
}
}
/*
* Set up support for the USB3 daughterboard:
* Parade PS8815 TCPC (integrated retimer)
* Diodes PI3USB9201 BC 1.2 chip (same as USB4 board)
* Silergy SYV682A PPC (same as USB4 board)
* Virtual mux with stacked retimer
*/
static void config_db_usb3_active(void)
{
tcpc_config[USBC_PORT_C1] = tcpc_config_p1_usb3;
usb_muxes[USBC_PORT_C1] = mux_config_p1_usb3_active;
}
/*
* Set up support for the passive USB3 daughterboard:
* TUSB422 TCPC (already the default)
* PI3USB9201 BC 1.2 chip (already the default)
* Silergy SYV682A PPC (already the default)
* Virtual mux without stacked retimer
*/
static void config_db_usb3_passive(void)
{
usb_muxes[USBC_PORT_C1] = mux_config_p1_usb3_passive;
}
static void config_port_discrete_tcpc(int port)
{
/*
* Support 2 Pin-to-Pin compatible parts: TUSB422 and RT1715, for
* simplicity allow either and decide at runtime which we are using.
* Default to TUSB422, and switch to RT1715 if it is on the I2C bus and
* the VID matches.
*/
int regval;
if (i2c_read16(port ? I2C_PORT_USB_C1 : I2C_PORT_USB_C0,
RT1715_I2C_ADDR_FLAGS, TCPC_REG_VENDOR_ID,
®val) == EC_SUCCESS) {
if (regval == RT1715_VENDOR_ID) {
CPRINTS("C%d: RT1715 detected", port);
tcpc_config[port].i2c_info.addr_flags =
RT1715_I2C_ADDR_FLAGS;
tcpc_config[port].drv = &rt1715_tcpm_drv;
return;
}
}
CPRINTS("C%d: Default to TUSB422", port);
}
static const char *db_type_prefix = "USB DB type: ";
__override void board_cbi_init(void)
{
enum ec_cfg_usb_db_type usb_db = ec_cfg_usb_db_type();
config_port_discrete_tcpc(0);
switch (usb_db) {
case DB_USB_ABSENT:
CPRINTS("%sNone", db_type_prefix);
break;
case DB_USB4_GEN2:
config_port_discrete_tcpc(1);
CPRINTS("%sUSB4 Gen1/2", db_type_prefix);
break;
case DB_USB4_GEN3:
config_port_discrete_tcpc(1);
CPRINTS("%sUSB4 Gen3", db_type_prefix);
break;
case DB_USB3_ACTIVE:
config_db_usb3_active();
CPRINTS("%sUSB3 Active", db_type_prefix);
break;
case DB_USB3_PASSIVE:
config_db_usb3_passive();
config_port_discrete_tcpc(1);
CPRINTS("%sUSB3 Passive", db_type_prefix);
break;
default:
CPRINTS("%sID %d not supported", db_type_prefix, usb_db);
}
if ((!IS_ENABLED(TEST_BUILD) && !ec_cfg_has_numeric_pad()) ||
get_board_id() <= 2)
keyboard_raw_set_cols(KEYBOARD_COLS_NO_KEYPAD);
}
/******************************************************************************/
/* USBC PPC configuration */
struct ppc_config_t ppc_chips[] = {
[USBC_PORT_C0] = {
.i2c_port = I2C_PORT_USB_C0,
.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
.drv = &sn5s330_drv,
},
[USBC_PORT_C1] = {
.i2c_port = I2C_PORT_USB_C1,
.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
.drv = &syv682x_drv,
},
};
BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT);
unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
/******************************************************************************/
/* PPC support routines */
void ppc_interrupt(enum gpio_signal signal)
{
switch (signal) {
case GPIO_USB_C0_PPC_INT_ODL:
sn5s330_interrupt(USBC_PORT_C0);
break;
case GPIO_USB_C1_PPC_INT_ODL:
syv682x_interrupt(USBC_PORT_C1);
default:
break;
}
}
/******************************************************************************/
/* BC1.2 charger detect configuration */
const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
[USBC_PORT_C0] = {
.i2c_port = I2C_PORT_USB_C0,
.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
},
[USBC_PORT_C1] = {
.i2c_port = I2C_PORT_USB_C1,
.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
},
};
BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT);
/******************************************************************************/
/* USBC TCPC configuration */
struct tcpc_config_t tcpc_config[] = {
[USBC_PORT_C0] = {
.bus_type = EC_BUS_TYPE_I2C,
.i2c_info = {
.port = I2C_PORT_USB_C0,
.addr_flags = TUSB422_I2C_ADDR_FLAGS,
},
.drv = &tusb422_tcpm_drv,
},
[USBC_PORT_C1] = {
.bus_type = EC_BUS_TYPE_I2C,
.i2c_info = {
.port = I2C_PORT_USB_C1,
.addr_flags = TUSB422_I2C_ADDR_FLAGS,
},
.drv = &tusb422_tcpm_drv,
},
};
BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT);
BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT);
/******************************************************************************/
/* USBC mux configuration - Tiger Lake includes internal mux */
struct usb_mux usbc0_tcss_usb_mux = {
.usb_port = USBC_PORT_C0,
.driver = &virtual_usb_mux_driver,
.hpd_update = &virtual_hpd_update,
};
struct usb_mux usbc1_tcss_usb_mux = {
.usb_port = USBC_PORT_C1,
.driver = &virtual_usb_mux_driver,
.hpd_update = &virtual_hpd_update,
};
struct usb_mux usb_muxes[] = {
[USBC_PORT_C0] = {
.usb_port = USBC_PORT_C0,
.next_mux = &usbc0_tcss_usb_mux,
.driver = &bb_usb_retimer,
.i2c_port = I2C_PORT_USB_1_MIX,
.i2c_addr_flags = USBC_PORT_C0_BB_RETIMER_I2C_ADDR,
},
[USBC_PORT_C1] = {
.usb_port = USBC_PORT_C1,
.next_mux = &usbc1_tcss_usb_mux,
.driver = &bb_usb_retimer,
.i2c_port = I2C_PORT_USB_1_MIX,
.i2c_addr_flags = USBC_PORT_C1_BB_RETIMER_I2C_ADDR,
},
};
BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT);
struct bb_usb_control bb_controls[] = {
[USBC_PORT_C0] = {
.usb_ls_en_gpio = GPIO_USB_C0_LS_EN,
.retimer_rst_gpio = GPIO_USB_C0_RT_RST_ODL,
},
[USBC_PORT_C1] = {
.usb_ls_en_gpio = GPIO_USB_C1_LS_EN,
.retimer_rst_gpio = GPIO_USB_C1_RT_RST_ODL,
},
};
BUILD_ASSERT(ARRAY_SIZE(bb_controls) == USBC_PORT_COUNT);
static void board_tcpc_init(void)
{
/* Don't reset TCPCs after initial reset */
if (!system_jumped_late())
board_reset_pd_mcu();
/* Enable PPC interrupts. */
gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL);
gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL);
/* Enable TCPC interrupts. */
gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL);
gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL);
/* Enable BC1.2 interrupts. */
gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL);
gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL);
}
DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_CHIPSET);
/******************************************************************************/
/* TCPC support routines */
uint16_t tcpc_get_alert_status(void)
{
uint16_t status = 0;
/*
* Check which port has the ALERT line set
*/
if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL))
status |= PD_STATUS_TCPC_ALERT_0;
if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL))
status |= PD_STATUS_TCPC_ALERT_1;
return status;
}
int ppc_get_alert_status(int port)
{
if (port == USBC_PORT_C0)
return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0;
else
return gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0;
}
|