1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
/* Copyright 2020 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Waddledee board configuration */
#ifndef __CROS_EC_BOARD_H
#define __CROS_EC_BOARD_H
/* Select Baseboard features */
#define VARIANT_DEDEDE_EC_IT8320
#include "baseboard.h"
/* System unlocked in early development */
#define CONFIG_SYSTEM_UNLOCKED
/* Battery */
#define CONFIG_BATTERY_FUEL_GAUGE
/* BC 1.2 */
#define CONFIG_BC12_DETECT_PI3USB9201
/* Charger */
#define CONFIG_CHARGE_RAMP_HW
#define CONFIG_CHARGER_DISCHARGE_ON_AC
#define CONFIG_CHARGER_RAA489000
#define CONFIG_CHARGER_SENSE_RESISTOR_AC 10
#define CONFIG_CHARGER_SENSE_RESISTOR 10
#define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */
/* LED */
#define CONFIG_LED_PWM_COUNT 1
/* Sensors */
#define CONFIG_ACCEL_LIS2DWL /* Lid accel */
#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */
/* Sensors without hardware FIFO are in forced mode */
#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
#define CONFIG_ACCEL_INTERRUPTS
/* Enable sensor fifo, must also define the _SIZE and _THRES */
#define CONFIG_ACCEL_FIFO
/* Power of 2 - Too large of a fifo causes too much timestamp jitter */
#define CONFIG_ACCEL_FIFO_SIZE 256
#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
#define CONFIG_LID_ANGLE
#define CONFIG_LID_ANGLE_UPDATE
#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
#define CONFIG_TABLET_MODE
#define CONFIG_TABLET_MODE_SWITCH
#define CONFIG_GMR_TABLET_MODE
/* TCPC */
#define CONFIG_USB_PD_PORT_MAX_COUNT 1
#define CONFIG_USB_PD_TCPM_RAA489000
/* USB defines specific to external TCPCs */
#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
#define CONFIG_USB_PD_VBUS_DETECT_TCPC
#define CONFIG_USB_PD_DISCHARGE_TCPC
#define CONFIG_USB_PD_TCPC_LOW_POWER
/* Variant references the TCPCs to determine Vbus sourcing */
#define CONFIG_USB_PD_5V_EN_CUSTOM
/* Thermistors */
#define CONFIG_TEMP_SENSOR
#define CONFIG_THERMISTOR
#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_PP3300_A
/* USB Mux */
#define CONFIG_USB_MUX_IT5205
#ifndef __ASSEMBLER__
#include "gpio_signal.h"
#include "registers.h"
enum pwm_channel {
PWM_CH_KBLIGHT,
PWM_CH_LED_RED,
PWM_CH_LED_GREEN,
PWM_CH_LED_BLUE,
PWM_CH_COUNT,
};
/* Motion sensors */
enum sensor_id {
LID_ACCEL,
BASE_ACCEL,
BASE_GYRO,
SENSOR_COUNT
};
/* ADC channels */
enum adc_channel {
ADC_VSNS_PP3300_A, /* ADC0 */
ADC_TEMP_SENSOR_1, /* ADC2 */
ADC_TEMP_SENSOR_2, /* ADC3 */
ADC_SUB_ANALOG, /* ADC13 */
ADC_CH_COUNT
};
enum temp_sensor_id {
TEMP_SENSOR_1,
TEMP_SENSOR_2,
TEMP_SENSOR_COUNT
};
/* List of possible batteries */
enum battery_type {
BATTERY_SMP,
BATTERY_LGC,
BATTERY_SUNWODA,
BATTERY_TYPE_COUNT,
};
int board_is_sourcing_vbus(int port);
#endif /* !__ASSEMBLER__ */
#endif /* __CROS_EC_BOARD_H */
|