1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
|
/* Copyright 2015 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* EC for Buddy board configuration */
#include "adc.h"
#include "adc_chip.h"
#include "backlight.h"
#include "chipset.h"
#include "common.h"
#include "driver/temp_sensor/g781.h"
#include "extpower.h"
#include "fan.h"
#include "gpio.h"
#include "host_command.h"
#include "i2c.h"
#include "jtag.h"
#include "keyboard_scan.h"
#include "lid_switch.h"
#include "peci.h"
#include "power.h"
#include "power_button.h"
#include "registers.h"
#include "switch.h"
#include "temp_sensor.h"
#include "temp_sensor_chip.h"
#include "thermal.h"
#include "timer.h"
#include "uart.h"
#include "util.h"
#include "gpio_list.h"
/* power signal list. Must match order of enum power_signal. */
const struct power_signal_info power_signal_list[] = {
{GPIO_PP5000_PGOOD, 1, "PGOOD_PP5000"},
{GPIO_PP1350_PGOOD, 1, "PGOOD_PP1350"},
{GPIO_PP1050_PGOOD, 1, "PGOOD_PP1050"},
{GPIO_VCORE_PGOOD, 1, "PGOOD_VCORE"},
{GPIO_PCH_SLP_S0_L, 1, "SLP_S0#_DEASSERTED"},
{GPIO_PCH_SLP_S3_L, 1, "SLP_S3#_DEASSERTED"},
{GPIO_PCH_SLP_S5_L, 1, "SLP_S5#_DEASSERTED"},
{GPIO_PCH_SLP_SUS_L, 1, "SLP_SUS#_DEASSERTED"},
};
BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT);
/* ADC channels. Must be in the exactly same order as in enum adc_channel. */
const struct adc_t adc_channels[] = {
/* EC internal temperature is calculated by
* 273 + (295 - 450 * ADC_VALUE / ADC_READ_MAX) / 2
* = -225 * ADC_VALUE / ADC_READ_MAX + 420.5
*/
{"ECTemp", LM4_ADC_SEQ0, -225, ADC_READ_MAX, 420,
LM4_AIN_NONE, 0x0e /* TS0 | IE0 | END0 */, 0, 0},
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
/* Physical fans. These are logically separate from pwm_channels. */
const struct fan_t fans[] = {
{.flags = FAN_USE_RPM_MODE,
.rpm_min = 1200,
.rpm_max = 4400,
.ch = 2,
.pgood_gpio = GPIO_PP5000_PGOOD,
.enable_gpio = GPIO_PP5000_FAN_EN,
},
};
BUILD_ASSERT(ARRAY_SIZE(fans) == CONFIG_FANS);
/* I2C ports */
const struct i2c_port_t i2c_ports[] = {
{"converter", 0, 100},
{"thermal", 5, 100},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
/* Temperature sensors data; must be in same order as enum temp_sensor_id. */
const struct temp_sensor_t temp_sensors[] = {
{"PECI", TEMP_SENSOR_TYPE_CPU, peci_temp_sensor_get_val, 0, 2},
{"ECInternal", TEMP_SENSOR_TYPE_BOARD, chip_temp_sensor_get_val, 0, 4},
{"G781Internal", TEMP_SENSOR_TYPE_BOARD, g781_get_val,
G781_IDX_INTERNAL, 4},
{"G781External", TEMP_SENSOR_TYPE_BOARD, g781_get_val,
G781_IDX_EXTERNAL, 4},
};
BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
/* Thermal limits for each temp sensor. All temps are in degrees K. Must be in
* same order as enum temp_sensor_id. To always ignore any temp, use 0.
*/
struct ec_thermal_config thermal_params[] = {
/* Only the AP affects the thermal limits and fan speed. */
{{C_TO_K(99), C_TO_K(100), C_TO_K(105)}, C_TO_K(70), C_TO_K(98)},
{{0, 0, 0}, 0, 0},
{{0, 0, 0}, 0, 0},
{{0, 0, 0}, 0, 0},
};
BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
struct keyboard_scan_config keyscan_config = {
.output_settle_us = 40,
.debounce_down_us = 6 * MSEC,
.debounce_up_us = 30 * MSEC,
.scan_period_us = 1500,
.min_post_scan_delay_us = 1000,
.poll_timeout_us = SECOND,
.actual_key_mask = {
0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
0xa4, 0xff, 0xf6, 0x55, 0xfa, 0xca /* full set */
},
};
|
