1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
|
/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "adc.h"
#include "board.h"
#include "common.h"
#include "console.h"
#include "gpio.h"
#include "hooks.h"
#include "registers.h"
#include "task.h"
#include "timer.h"
#include "util.h"
#include "usb_pd.h"
#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)
/* Acceptable margin between requested VBUS and measured value */
#define MARGIN_MV 400 /* mV */
/* Define typical operating power and max power */
#define OPERATING_POWER_MW 1000
#define MAX_POWER_MW 1500
#define MAX_CURRENT_MA 300
#define PDO_FIXED_FLAGS (PDO_FIXED_EXTERNAL)
/* we are not acting as a source */
const uint32_t pd_src_pdo[] = {
PDO_FIXED(5000, 500, PDO_FIXED_FLAGS),
};
const int pd_src_pdo_cnt = ARRAY_SIZE(pd_src_pdo);
/* Fake PDOs : we just want our pre-defined voltages */
const uint32_t pd_snk_pdo[] = {
PDO_FIXED(5000, 500, PDO_FIXED_FLAGS),
PDO_FIXED(12000, 500, PDO_FIXED_FLAGS),
PDO_FIXED(20000, 500, PDO_FIXED_FLAGS),
};
const int pd_snk_pdo_cnt = ARRAY_SIZE(pd_snk_pdo);
/* Desired voltage requested as a sink (in millivolts) */
static unsigned select_mv = 20000;
int pd_choose_voltage(int cnt, uint32_t *src_caps, uint32_t *rdo,
uint32_t *curr_limit, uint32_t *supply_voltage)
{
int i;
int ma;
int set_mv = select_mv;
int max;
uint32_t flags;
/* Default to 5V */
if (set_mv <= 0)
set_mv = 5000;
/* Get the selected voltage */
for (i = cnt; i >= 0; i--) {
int mv = ((src_caps[i] >> 10) & 0x3FF) * 50;
int type = src_caps[i] & PDO_TYPE_MASK;
if ((mv == set_mv) && (type == PDO_TYPE_FIXED))
break;
}
if (i < 0)
return -EC_ERROR_UNKNOWN;
/* build rdo for desired power */
ma = 10 * (src_caps[i] & 0x3FF);
max = MIN(ma, MAX_CURRENT_MA);
flags = (max * set_mv) < (1000 * OPERATING_POWER_MW) ?
RDO_CAP_MISMATCH : 0;
*rdo = RDO_FIXED(i + 1, max, max, 0);
CPRINTF("Request [%d] %dV %dmA", i, set_mv/1000, max);
/* Mismatch bit set if less power offered than the operating power */
if (flags & RDO_CAP_MISMATCH)
CPRINTF(" Mismatch");
CPRINTF("\n");
*curr_limit = max;
*supply_voltage = set_mv;
return EC_SUCCESS;
}
void pd_set_input_current_limit(int port, uint32_t max_ma,
uint32_t supply_voltage)
{
/* No battery, nothing to do */
return;
}
void pd_set_max_voltage(unsigned mv)
{
select_mv = mv;
}
int pd_request_voltage(uint32_t rdo)
{
/* Never acting as a source */
return EC_ERROR_INVAL;
}
int pd_set_power_supply_ready(int port)
{
/* Never acting as a source */
return EC_ERROR_INVAL;
}
void pd_power_supply_reset(int port)
{
}
int pd_board_checks(void)
{
static int blinking;
int vbus;
int led5 = 0, led12 = 0, led20 = 0;
/* LED blinking state for the default indicator */
blinking = (blinking + 1) & 3;
vbus = adc_read_channel(ADC_CH_VBUS_SENSE);
if (select_mv > 0) {
/* is current VBUS voltage matching the request ? */
int diff = vbus - select_mv;
int correct = (diff < MARGIN_MV) && (diff > -MARGIN_MV);
/*
* turn on the LED if the voltage is correct
* or we are in on-period of the duty cycle.
*/
int led_value = correct || !blinking;
/* decide which LED is used */
switch (select_mv) {
case 5000:
led5 = led_value;
break;
case 12000:
led12 = led_value;
break;
case 20000:
led20 = led_value;
break;
}
}
/* switch LEDs */
gpio_set_level(GPIO_LED_PP5000, led5);
gpio_set_level(GPIO_LED_PP12000, led12);
gpio_set_level(GPIO_LED_PP20000, led20);
return EC_SUCCESS;
}
int pd_check_power_swap(int port)
{
/* Always refuse power swap */
return 0;
}
int pd_check_data_swap(int port, int data_role)
{
/* Always refuse data swap */
return 0;
}
void pd_execute_data_swap(int port, int data_role)
{
/* Do nothing */
}
void pd_new_contract(int port, int pr_role, int dr_role,
int partner_pr_swap, int partner_dr_swap)
{
}
|
