1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
|
/* Copyright 2019 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "adc.h"
#include "adc_chip.h"
#include "backlight.h"
#include "board.h"
#include "button.h"
#include "charge_manager.h"
#include "charge_state.h"
#include "charger.h"
#include "chipset.h"
#include "common.h"
#include "console.h"
#include "cros_board_info.h"
#include "driver/accelgyro_bmi160.h"
#include "driver/als_tcs3400.h"
#include "driver/battery/max17055.h"
#include "driver/charger/rt946x.h"
#include "driver/sync.h"
#include "driver/tcpm/mt6370.h"
#include "driver/temp_sensor/tmp432.h"
#include "driver/wpc/p9221.h"
#include "ec_commands.h"
#include "extpower.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "i2c.h"
#include "power.h"
#include "power_button.h"
#include "lid_switch.h"
#include "pwm.h"
#include "pwm_chip.h"
#include "registers.h"
#include "spi.h"
#include "switch.h"
#include "system.h"
#include "task.h"
#include "tcpm.h"
#include "temp_sensor.h"
#include "temp_sensor_chip.h"
#include "thermal.h"
#include "timer.h"
#include "usb_charge.h"
#include "usb_mux.h"
#include "usb_pd_tcpm.h"
#include "util.h"
#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args)
/* LCM_ID is embedded in SKU_ID bit[19-16] */
#define SKU_ID_TO_LCM_ID(x) (((x) >> PANEL_ID_BIT_POSITION) & 0xf)
#define LCM_ID_TO_SKU_ID(x) (((x) & 0xf) << PANEL_ID_BIT_POSITION)
/* BOARD_VERSION < 5: Pull-up = 1800 mV. */
static const struct mv_to_id panels0[] = {
{ PANEL_BOE_TV101WUM_NG0, 74 }, /* 2.2 kohm */
{ PANEL_BOE_TV080WUM_NG0, 212 }, /* 6.8 kohm */
{ PANEL_STA_10P, 1191 }, /* 100 kohm */
{ PANEL_STA_08P, 1028 }, /* 68 kohm */
};
BUILD_ASSERT(ARRAY_SIZE(panels0) < PANEL_COUNT);
/* BOARD_VERSION >= 5: Pull-up = 3300 mV. */
static const struct mv_to_id panels1[] = {
{ PANEL_BOE_TV101WUM_NG0, 136 }, /* 2.2 kohm */
{ PANEL_BOE_TV080WUM_NG0, 387 }, /* 6.8 kohm */
{ PANEL_STA_10P, 2184 }, /* 100 kohm */
{ PANEL_STA_08P, 1884 }, /* 68 kohm */
};
BUILD_ASSERT(ARRAY_SIZE(panels1) < PANEL_COUNT);
BUILD_ASSERT(PANEL_COUNT <= PANEL_UNINITIALIZED);
uint8_t board_version;
uint8_t oem;
uint32_t sku = LCM_ID_TO_SKU_ID(PANEL_UNINITIALIZED);
static const struct rt946x_init_setting battery_init_setting = {
.eoc_current = 150,
.mivr = 4000,
.ircmp_vclamp = 32,
.ircmp_res = 25,
.boost_voltage = 5050,
.boost_current = 1500,
};
int board_read_id(enum adc_channel ch, const struct mv_to_id *table, int size)
{
int mv = adc_read_channel(ch);
int i;
if (mv == ADC_READ_ERROR)
mv = adc_read_channel(ch);
for (i = 0; i < size; i++) {
if (ABS(mv - table[i].median_mv) < ADC_MARGIN_MV)
return table[i].id;
}
return ADC_READ_ERROR;
}
const struct rt946x_init_setting *board_rt946x_init_setting(void)
{
return &battery_init_setting;
}
static void board_setup_panel(void)
{
uint8_t channel;
uint8_t dim;
int rv = 0;
if (board_version >= 3) {
switch (SKU_ID_TO_LCM_ID(sku)) {
case PANEL_BOE_TV080WUM_NG0:
case PANEL_STA_08P:
channel = 0xfa;
dim = 0xc8;
break;
case PANEL_BOE_TV101WUM_NG0:
case PANEL_STA_10P:
channel = 0xfe;
dim = 0xc4;
break;
default:
return;
}
} else {
/* TODO: to be removed once the boards are deprecated. */
channel = sku & SKU_ID_PANEL_SIZE_MASK ? 0xfe : 0xfa;
dim = sku & SKU_ID_PANEL_SIZE_MASK ? 0xc4 : 0xc8;
}
rv |= i2c_write8(I2C_PORT_CHARGER, RT946X_ADDR, MT6370_BACKLIGHT_BLEN,
channel);
rv |= i2c_write8(I2C_PORT_CHARGER, RT946X_ADDR, MT6370_BACKLIGHT_BLDIM,
dim);
rv |= i2c_write8(I2C_PORT_CHARGER, RT946X_ADDR, MT6370_BACKLIGHT_BLPWM,
0xac);
if (rv)
CPRINTS("Board setup panel failed\n");
}
static enum panel_id board_get_panel_id(void)
{
enum panel_id id;
if (board_version < 3) {
id = PANEL_DEFAULT; /* No LCM_ID. */
} else {
const struct mv_to_id *table = panels0;
int size = ARRAY_SIZE(panels0);
if (board_version >= 5) {
table = panels1;
size = ARRAY_SIZE(panels1);
}
id = board_read_id(ADC_LCM_ID, table, size);
if (id < PANEL_DEFAULT || PANEL_COUNT <= id)
id = PANEL_DEFAULT;
}
CPRINTS("LCM ID: %d", id);
return id;
}
#define CBI_SKU_ID_SIZE 4
int cbi_board_override(enum cbi_data_tag tag, uint8_t *buf, uint8_t *size)
{
switch (tag) {
case CBI_TAG_SKU_ID:
if (*size != CBI_SKU_ID_SIZE)
/* For old boards (board_version < 3) */
return EC_SUCCESS;
if (SKU_ID_TO_LCM_ID(sku) == PANEL_UNINITIALIZED)
/* Haven't read LCM_ID */
return EC_ERROR_BUSY;
buf[PANEL_ID_BIT_POSITION / 8] = SKU_ID_TO_LCM_ID(sku);
break;
default:
break;
}
return EC_SUCCESS;
}
static void cbi_init(void)
{
uint32_t val;
if (cbi_get_board_version(&val) == EC_SUCCESS && val <= UINT8_MAX)
board_version = val;
CPRINTS("Board Version: 0x%02x", board_version);
if (cbi_get_oem_id(&val) == EC_SUCCESS && val <= PROJECT_COUNT)
oem = val;
CPRINTS("OEM: %d", oem);
sku = LCM_ID_TO_SKU_ID(board_get_panel_id());
if (cbi_get_sku_id(&val) == EC_SUCCESS)
sku = val;
CPRINTS("SKU: 0x%08x", sku);
}
DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1);
static void tcpc_alert_event(enum gpio_signal signal)
{
schedule_deferred_pd_interrupt(0 /* port */);
}
static void gauge_interrupt(enum gpio_signal signal)
{
task_wake(TASK_ID_CHARGER);
}
#include "gpio_list.h"
/******************************************************************************/
/* ADC channels. Must be in the exactly same order as in enum adc_channel. */
const struct adc_t adc_channels[] = {
[ADC_LCM_ID] = {"LCM_ID", 3300, 4096, 0, STM32_AIN(10)},
[ADC_EC_SKU_ID] = {"EC_SKU_ID", 3300, 4096, 0, STM32_AIN(8)},
[ADC_BATT_ID] = {"BATT_ID", 3300, 4096, 0, STM32_AIN(7)},
[ADC_USBC_THERM] = {"USBC_THERM", 3300, 4096, 0, STM32_AIN(14),
STM32_ADC_SMPR_239_5_CY},
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
/******************************************************************************/
/* I2C ports */
const struct i2c_port_t i2c_ports[] = {
{"charger", I2C_PORT_CHARGER, 400, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
{"tcpc0", I2C_PORT_TCPC0, 400, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
{"battery", I2C_PORT_BATTERY, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA},
{"accelgyro", I2C_PORT_ACCEL, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA},
{"eeprom", I2C_PORT_EEPROM, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
/* power signal list. Must match order of enum power_signal. */
const struct power_signal_info power_signal_list[] = {
{GPIO_AP_IN_SLEEP_L, POWER_SIGNAL_ACTIVE_LOW, "AP_IN_S3_L"},
{GPIO_PMIC_EC_RESETB, POWER_SIGNAL_ACTIVE_HIGH, "PMIC_PWR_GOOD"},
};
BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT);
#ifdef CONFIG_TEMP_SENSOR_TMP432
/* Temperature sensors data; must be in same order as enum temp_sensor_id. */
const struct temp_sensor_t temp_sensors[] = {
{"TMP432_Internal", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val,
TMP432_IDX_LOCAL, 4},
{"TMP432_Sensor_1", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val,
TMP432_IDX_REMOTE1, 4},
{"TMP432_Sensor_2", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val,
TMP432_IDX_REMOTE2, 4},
};
BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
/*
* Thermal limits for each temp sensor. All temps are in degrees K. Must be in
* same order as enum temp_sensor_id. To always ignore any temp, use 0.
*/
struct ec_thermal_config thermal_params[] = {
{{0, 0, 0}, 0, 0}, /* TMP432_Internal */
{{0, 0, 0}, 0, 0}, /* TMP432_Sensor_1 */
{{0, 0, 0}, 0, 0}, /* TMP432_Sensor_2 */
};
BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
#endif
/******************************************************************************/
/* SPI devices */
const struct spi_device_t spi_devices[] = {
};
const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices);
/******************************************************************************/
const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_COUNT] = {
{
.bus_type = EC_BUS_TYPE_I2C,
.i2c_info = {
.port = I2C_PORT_TCPC0,
.addr = MT6370_TCPC_I2C_ADDR,
},
.drv = &mt6370_tcpm_drv},
};
struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_COUNT] = {
{
.driver = &virtual_usb_mux_driver,
.hpd_update = &virtual_hpd_update,
},
};
void board_reset_pd_mcu(void)
{
}
uint16_t tcpc_get_alert_status(void)
{
uint16_t status = 0;
if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL))
status |= PD_STATUS_TCPC_ALERT_0;
return status;
}
int board_set_active_charge_port(int charge_port)
{
CPRINTS("New chg p%d", charge_port);
switch (charge_port) {
case 0:
/* Don't charge from a source port except wireless charging*/
#ifdef CONFIG_WIRELESS_CHARGER_P9221_R7
if (board_vbus_source_enabled(charge_port)
&& !wpc_chip_is_online())
#else
if (board_vbus_source_enabled(charge_port))
#endif
return -1;
break;
case CHARGE_PORT_NONE:
/*
* To ensure the fuel gauge (max17055) is always powered
* even when battery is disconnected, keep VBAT rail on but
* set the charging current to minimum.
*/
charger_set_current(0);
break;
default:
panic("Invalid charge port\n");
break;
}
return EC_SUCCESS;
}
void board_set_charge_limit(int port, int supplier, int charge_ma,
int max_ma, int charge_mv)
{
charge_set_input_current_limit(MAX(charge_ma,
CONFIG_CHARGER_INPUT_CURRENT), charge_mv);
}
int extpower_is_present(void)
{
return tcpm_get_vbus_level(0);
}
int pd_snk_is_vbus_provided(int port)
{
if (port)
panic("Invalid charge port\n");
return rt946x_is_vbus_ready();
}
/*
* Threshold to detect USB-C board. If the USB-C board isn't connected,
* USBC_THERM is floating thus the ADC pin should read about the pull-up
* voltage. If it's connected, the voltage is capped by the resistor (429k)
* place in parallel to the thermistor. 3.3V x 429k/(39k + 429k) = 3.025V
*/
#define USBC_THERM_THRESHOLD 3025
static void board_init(void)
{
#ifdef SECTION_IS_RO
/* If USB-C board isn't connected, the device is being assembled.
* We cut off the battery until the assembly is done for better yield.
* Timing is ok because STM32F0 initializes ADC on demand. */
if (board_version > 0x02) {
int mv = adc_read_channel(ADC_USBC_THERM);
if (mv == ADC_READ_ERROR)
mv = adc_read_channel(ADC_USBC_THERM);
CPRINTS("USBC_THERM=%d", mv);
if (mv > USBC_THERM_THRESHOLD) {
cflush();
board_cut_off_battery();
}
}
#endif
/* Set SPI1 PB13/14/15 pins to high speed */
STM32_GPIO_OSPEEDR(GPIO_B) |= 0xfc000000;
/* Enable TCPC alert interrupts */
gpio_enable_interrupt(GPIO_USB_C0_PD_INT_ODL);
/* Enable charger interrupts */
gpio_enable_interrupt(GPIO_CHARGER_INT_ODL);
#ifdef SECTION_IS_RW
#ifdef CONFIG_WIRELESS_CHARGER_P9221_R7
/* Enable Wireless charger interrupts */
gpio_enable_interrupt(GPIO_P9221_INT_ODL);
#endif
/* Enable interrupts from BMI160 sensor. */
gpio_enable_interrupt(GPIO_ACCEL_INT_ODL);
/* Enable interrupt for the TCS3400 color light sensor */
if (board_version >= 5)
gpio_enable_interrupt(GPIO_TCS3400_INT_ODL);
/* Enable interrupt for the camera vsync. */
gpio_enable_interrupt(GPIO_SYNC_INT);
#endif /* SECTION_IS_RW */
/* Enable interrupt from PMIC. */
gpio_enable_interrupt(GPIO_PMIC_EC_RESETB);
/* Enable gauge interrupt from max17055 */
gpio_enable_interrupt(GPIO_GAUGE_INT_ODL);
board_setup_panel();
}
DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
#ifdef SECTION_IS_RW
static void usb_pd_connect(void)
{
/* VBUS from p9221 is already zero as it's disabled by NCP3902 */
p9221_notify_vbus_change(0);
rt946x_toggle_bc12_detection();
}
DECLARE_HOOK(HOOK_USB_PD_CONNECT, usb_pd_connect, HOOK_PRIO_DEFAULT);
#endif
void board_config_pre_init(void)
{
STM32_RCC_AHBENR |= STM32_RCC_HB_DMA1;
/*
* Remap USART1 and SPI2 DMA:
*
* Ch4: USART1_TX / Ch5: USART1_RX (1000)
* Ch6: SPI2_RX / Ch7: SPI2_TX (0011)
*/
STM32_DMA_CSELR(STM32_DMAC_CH4) = (8 << 12) | (8 << 16) |
(3 << 20) | (3 << 24);
}
/* Motion sensors */
/* Mutexes */
#ifdef SECTION_IS_RW
static struct mutex g_lid_mutex;
static struct bmi160_drv_data_t g_bmi160_data;
static struct als_drv_data_t g_tcs3400_data = {
.als_cal.scale = 1,
.als_cal.uscale = 0,
.als_cal.offset = 0,
};
static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = {
.device_scale = 1,
.device_uscale = 0,
.rgb_cal[X] = {
.scale = ALS_CHANNEL_SCALE(1),
.offset = 0,
},
.rgb_cal[Y] = {
.scale = ALS_CHANNEL_SCALE(1),
.offset = 0,
},
.rgb_cal[Z] = {
.scale = ALS_CHANNEL_SCALE(1),
.offset = 0,
},
};
/* Matrix to rotate accelerometer into standard reference frame */
const mat33_fp_t lid_standard_ref = {
{ 0, FLOAT_TO_FP(-1), 0},
{ FLOAT_TO_FP(-1), 0, 0},
{ 0, 0, FLOAT_TO_FP(-1)}
};
struct motion_sensor_t motion_sensors[] = {
/*
* Note: bmi160: supports accelerometer and gyro sensor
* Requirement: accelerometer sensor must init before gyro sensor
* DO NOT change the order of the following table.
*/
[LID_ACCEL] = {
.name = "Accel",
.active_mask = SENSOR_ACTIVE_S0_S3,
.chip = MOTIONSENSE_CHIP_BMI160,
.type = MOTIONSENSE_TYPE_ACCEL,
.location = MOTIONSENSE_LOC_LID,
.drv = &bmi160_drv,
.mutex = &g_lid_mutex,
.drv_data = &g_bmi160_data,
.port = I2C_PORT_ACCEL,
.addr = BMI160_ADDR0,
.rot_standard_ref = &lid_standard_ref,
.default_range = 4, /* g */
.min_frequency = BMI160_ACCEL_MIN_FREQ,
.max_frequency = BMI160_ACCEL_MAX_FREQ,
.config = {
/* Enable accel in S0 */
[SENSOR_CONFIG_EC_S0] = {
.odr = 10000 | ROUND_UP_FLAG,
.ec_rate = 100 * MSEC,
},
},
},
[LID_GYRO] = {
.name = "Gyro",
.active_mask = SENSOR_ACTIVE_S0_S3,
.chip = MOTIONSENSE_CHIP_BMI160,
.type = MOTIONSENSE_TYPE_GYRO,
.location = MOTIONSENSE_LOC_LID,
.drv = &bmi160_drv,
.mutex = &g_lid_mutex,
.drv_data = &g_bmi160_data,
.port = I2C_PORT_ACCEL,
.addr = BMI160_ADDR0,
.default_range = 1000, /* dps */
.rot_standard_ref = &lid_standard_ref,
.min_frequency = BMI160_GYRO_MIN_FREQ,
.max_frequency = BMI160_GYRO_MAX_FREQ,
},
[CLEAR_ALS] = {
.name = "Clear Light",
.active_mask = SENSOR_ACTIVE_S0_S3,
.chip = MOTIONSENSE_CHIP_TCS3400,
.type = MOTIONSENSE_TYPE_LIGHT,
.location = MOTIONSENSE_LOC_LID,
.drv = &tcs3400_drv,
.drv_data = &g_tcs3400_data,
.port = I2C_PORT_ALS,
.addr = TCS3400_I2C_ADDR,
.rot_standard_ref = NULL,
.default_range = 0x10000, /* scale = 1x, uscale = 0 */
.min_frequency = TCS3400_LIGHT_MIN_FREQ,
.max_frequency = TCS3400_LIGHT_MAX_FREQ,
.config = {
/* Run ALS sensor in S0 */
[SENSOR_CONFIG_EC_S0] = {
.odr = 1000,
},
},
},
[RGB_ALS] = {
.name = "RGB Light",
.active_mask = SENSOR_ACTIVE_S0_S3,
.chip = MOTIONSENSE_CHIP_TCS3400,
.type = MOTIONSENSE_TYPE_LIGHT_RGB,
.location = MOTIONSENSE_LOC_LID,
.drv = &tcs3400_rgb_drv,
.drv_data = &g_tcs3400_rgb_data,
/*.port=I2C_PORT_ALS,*/ /* Unused. RGB channels read by CLEAR_ALS. */
.rot_standard_ref = NULL,
.default_range = 0x10000, /* scale = 1x, uscale = 0 */
.min_frequency = 0, /* 0 indicates we should not use sensor directly */
.max_frequency = 0, /* 0 indicates we should not use sensor directly */
},
[VSYNC] = {
.name = "Camera vsync",
.active_mask = SENSOR_ACTIVE_S0,
.chip = MOTIONSENSE_CHIP_GPIO,
.type = MOTIONSENSE_TYPE_SYNC,
.location = MOTIONSENSE_LOC_CAMERA,
.drv = &sync_drv,
.default_range = 0,
.min_frequency = 0,
.max_frequency = 1,
},
};
const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
const struct motion_sensor_t *motion_als_sensors[] = {
&motion_sensors[CLEAR_ALS],
};
BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
#endif /* SECTION_IS_RW */
int board_allow_i2c_passthru(int port)
{
return (port == I2C_PORT_VIRTUAL_BATTERY);
}
void usb_charger_set_switches(int port, enum usb_switch setting)
{
}
int board_get_fod(uint8_t **fod)
{
*fod = NULL;
return 0;
}
int board_get_epp_fod(uint8_t **fod)
{
*fod = NULL;
return 0;
}
|