1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
|
/* -*- mode:c -*-
*
* Copyright 2021 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Declare symbolic names for all the GPIOs that we care about.
* Note: Those with interrupt handlers must be declared first. */
/* USB interrupts */
GPIO_INT(USB_C0_PD_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, tcpc_alert_event) /* Interrupt from port-0 TCPC */
GPIO_INT(USB_C1_PD_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, tcpc_alert_event) /* Interrupt from port-1 TCPC */
GPIO_INT(USB_C0_SWCTL_INT_ODL, PIN(0, 3), GPIO_INT_FALLING, ppc_interrupt) /* Interrupt from port-0 PPC */
GPIO_INT(USB_C1_SWCTL_INT_ODL, PIN(4, 0), GPIO_INT_FALLING, ppc_interrupt) /* Interrupt from port-1 PPC */
GPIO_INT(USB_C0_BC12_INT_L, PIN(6, 1), GPIO_INT_FALLING | GPIO_PULL_UP, usb0_evt) /* Interrupt from port-0 BC1.2 */
GPIO_INT(USB_C1_BC12_INT_L, PIN(8, 2), GPIO_INT_FALLING | GPIO_PULL_UP, usb1_evt) /* Interrupt from port-1 BC1.2 */
GPIO_INT(USB_A0_OC_ODL, PIN(F, 4), GPIO_INT_BOTH | GPIO_PULL_UP, usba_oc_interrupt)
/* System interrupts */
GPIO_INT(CHG_ACOK_OD, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) /* ACOK */
GPIO_INT(EC_PWR_BTN_ODL, PIN(0, 0), GPIO_INT_BOTH, power_button_interrupt) /* Power button */
GPIO_INT(EC_VOLDN_BTN_ODL, PIN(6, 2), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) /* Volume Up button */
GPIO_INT(EC_VOLUP_BTN_ODL, PIN(C, 2), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) /* Volume Down button */
GPIO_INT(EC_WP_ODL, PIN(D, 3), GPIO_INT_BOTH, switch_interrupt) /* Write protection */
GPIO_INT(LID_OPEN_EC, PIN(0, 1), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt) /* Lid open */
GPIO_INT(AP_RST_L, PIN(5, 1), GPIO_INT_BOTH, chipset_ap_rst_interrupt) /* PMIC to signal AP reset */
GPIO_INT(PS_HOLD, PIN(A, 6), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_signal_interrupt) /* Indicate when AP triggers reset/shutdown */
GPIO_INT(AP_SUSPEND, PIN(5, 7), GPIO_INT_BOTH, power_signal_interrupt) /* Suspend signal from PMIC */
/*
* When switch-cap is off, the POWER_GOOD signal is floating. Need a pull-down
* to make it low.
*/
GPIO_INT(MB_POWER_GOOD, PIN(3, 7), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_signal_interrupt) /* PP1800_L18B from PMIC */
GPIO_INT(WARM_RESET_L, PIN(B, 0), GPIO_INT_BOTH, power_signal_interrupt) /* AP warm reset */
GPIO_INT(AP_EC_SPI_CS_L, PIN(5, 3), GPIO_INT_FALLING | GPIO_PULL_DOWN, shi_cs_event) /* EC SPI Chip Select */
/* Sensor interrupts */
GPIO_INT(TABLET_MODE_L, PIN(C, 6), GPIO_INT_BOTH, gmr_tablet_switch_isr)
GPIO_INT(ACCEL_GYRO_INT_L, PIN(A, 3), GPIO_INT_FALLING, bmi260_interrupt) /* Accelerometer/gyro interrupt */
GPIO(RTC_EC_WAKE_ODL , PIN(0, 2), GPIO_INPUT) /* RTC interrupt */
GPIO(EC_ENTERING_RW, PIN(7, 2), GPIO_OUT_LOW) /* Indicate when EC is entering RW code */
GPIO(CCD_MODE_ODL, PIN(6, 3), GPIO_INPUT) /* Case Closed Debug Mode */
GPIO(EC_BATT_PRES_ODL, PIN(E, 5), GPIO_INPUT) /* Battery Present */
GPIO(EC_GSC_PACKET_MODE, PIN(8, 3), GPIO_OUT_LOW) /* GSC Packet Mode */
/* PMIC/AP 1.8V */
GPIO(PMIC_RESIN_L, PIN(A, 0), GPIO_ODR_HIGH) /* PMIC reset trigger */
GPIO(PMIC_KPD_PWR_ODL, PIN(A, 2), GPIO_ODR_HIGH) /* PMIC power button */
GPIO(AP_EC_INT_L, PIN(5, 6), GPIO_ODR_HIGH) /* Interrupt line between AP and EC */
/* Power enables */
GPIO(SWITCHCAP_ON, PIN(D, 5), GPIO_OUT_LOW) /* Enable switch cap */
GPIO(EN_PP5000_S5, PIN(7, 3), GPIO_OUT_HIGH) /* Enable PP5000 */
GPIO(EC_BL_DISABLE_L, PIN(B, 6), GPIO_OUT_LOW) /* Backlight disable signal from EC */
/* Sensors */
GPIO(LID_ACCEL_INT_L, PIN(A, 1), GPIO_INPUT) /* Lid accel sensor interrupt */
/* Control the gate for trackpad IRQ. High closes the gate.
* This is always set low so that the OS can manage the trackpad. */
GPIO(TP_INT_GATE, PIN(7, 4), GPIO_OUT_LOW)
/* USB-C */
GPIO(USB_C0_PD_RST_L, PIN(F, 1), GPIO_OUT_HIGH) /* Port-0 TCPC chip reset */
GPIO(USB_C1_PD_RST_L, PIN(E, 4), GPIO_OUT_HIGH) /* Port-1 TCPC chip reset */
GPIO(DP_MUX_OE_L, PIN(B, 1), GPIO_ODR_HIGH) /* DP mux enable, actually Open-Drain */
GPIO(DP_MUX_SEL, PIN(4, 5), GPIO_OUT_LOW) /* DP mux selection: L:C0, H:C1 */
GPIO(DP_HOT_PLUG_DET_R, PIN(9, 5), GPIO_OUT_LOW) /* DP HPD to AP */
/* USB-A */
GPIO(EN_USB_A_5V, PIN(F, 0), GPIO_OUT_LOW)
GPIO(USB_A_CDP_ILIM_EN_L, PIN(7, 5), GPIO_OUT_HIGH) /* H:CDP, L:SDP. Only one USB-A port, always CDP */
/* LEDs */
GPIO(EC_CHG_LED_Y_C0, PIN(6, 0), GPIO_OUT_LOW)
GPIO(EC_CHG_LED_W_C0, PIN(C, 0), GPIO_OUT_LOW)
GPIO(EC_CHG_LED_Y_C1, PIN(C, 3), GPIO_OUT_LOW)
GPIO(EC_CHG_LED_W_C1, PIN(C, 4), GPIO_OUT_LOW)
/*
* SPI host interface - enable PDs by default. These will be made functional
* by the SHI driver when the AP powers up, and restored back to GPIO when
* the AP powers down.
*/
GPIO(AP_EC_SPI_MOSI, PIN(4, 6), GPIO_INPUT | GPIO_PULL_DOWN)
GPIO(AP_EC_SPI_MISO, PIN(4, 7), GPIO_INPUT | GPIO_PULL_DOWN)
GPIO(AP_EC_SPI_CLK, PIN(5, 5), GPIO_INPUT | GPIO_PULL_DOWN)
/* I2C */
GPIO(EC_I2C_POWER_SCL, PIN(B, 5), GPIO_INPUT)
GPIO(EC_I2C_POWER_SDA, PIN(B, 4), GPIO_INPUT)
GPIO(EC_I2C_USB_C0_PD_SCL, PIN(9, 0), GPIO_INPUT)
GPIO(EC_I2C_USB_C0_PD_SDA, PIN(8, 7), GPIO_INPUT)
GPIO(EC_I2C_USB_C1_PD_SCL, PIN(9, 2), GPIO_INPUT)
GPIO(EC_I2C_USB_C1_PD_SDA, PIN(9, 1), GPIO_INPUT)
GPIO(EC_I2C_RTC_SCL, PIN(F, 3), GPIO_INPUT)
GPIO(EC_I2C_RTC_SDA, PIN(F, 2), GPIO_INPUT)
GPIO(EC_I2C_EEPROM_SCL, PIN(3, 3), GPIO_INPUT)
GPIO(EC_I2C_EEPROM_SDA, PIN(3, 6), GPIO_INPUT)
GPIO(EC_I2C_SENSOR_SCL, PIN(B, 3), GPIO_INPUT | GPIO_SEL_1P8V)
GPIO(EC_I2C_SENSOR_SDA, PIN(B, 2), GPIO_INPUT | GPIO_SEL_1P8V)
/* Board/SKU IDs */
GPIO(BRD_ID0, PIN(9, 4), GPIO_INPUT)
GPIO(BRD_ID1, PIN(9, 7), GPIO_INPUT)
GPIO(BRD_ID2, PIN(A, 5), GPIO_INPUT)
GPIO(SKU_ID0, PIN(6, 7), GPIO_INPUT)
GPIO(SKU_ID1, PIN(7, 0), GPIO_INPUT)
GPIO(SKU_ID2, PIN(E, 1), GPIO_INPUT)
/* Switchcap */
/*
* GPIO0 is configured as PVC_PG. When the chip in power down mode, it outputs
* high-Z. Set pull-down to avoid floating.
*/
GPIO(SRC_VPH_PWR_PG, PIN(E, 2), GPIO_INPUT | GPIO_PULL_DOWN) /* Switchcap GPIO0 */
/* Special straps */
GPIO(ARM_X86, PIN(6, 6), GPIO_OUT_LOW) /* NC, low for power saving */
/* Unused GPIOs, NC. */
UNUSED(PIN(5, 2))
UNUSED(PIN(5, 4))
UNUSED(PIN(7, 6))
UNUSED(PIN(C, 5))
UNUSED(PIN(D, 1))
UNUSED(PIN(D, 0))
UNUSED(PIN(E, 3))
UNUSED(PIN(C, 1))
UNUSED(PIN(0, 4))
UNUSED(PIN(D, 6))
UNUSED(PIN(3, 2))
UNUSED(PIN(3, 5))
UNUSED(PIN(D, 7))
UNUSED(PIN(8, 6))
UNUSED(PIN(D, 4))
UNUSED(PIN(4, 1))
UNUSED(PIN(3, 4))
UNUSED(PIN(C, 7))
UNUSED(PIN(A, 4))
UNUSED(PIN(9, 6))
UNUSED(PIN(9, 3))
UNUSED(PIN(A, 7))
UNUSED(PIN(5, 0))
UNUSED(PIN(8, 1))
/* Alternate functions GPIO definitions */
ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART (GPIO64/65) */
ALTERNATE(PIN_MASK(B, 0x30), 1, MODULE_I2C, 0) /* I2C0 (GPIOB4/B5) */
ALTERNATE(PIN_MASK(9, 0x07), 1, MODULE_I2C, 0) /* I2C1 SDA (GPIO90), I2C2 (GPIO91/92) */
ALTERNATE(PIN_MASK(8, 0x80), 1, MODULE_I2C, 0) /* I2C1 SCL (GPIO87) */
ALTERNATE(PIN_MASK(F, 0x0C), 1, MODULE_I2C, 0) /* I2C4 (GPIOF2/F3) */
ALTERNATE(PIN_MASK(3, 0x48), 1, MODULE_I2C, 0) /* I2C5 (GPIO33/36) */
ALTERNATE(PIN_MASK(B, 0x0C), 1, MODULE_I2C, GPIO_SEL_1P8V) /* I2C7 (GPIOB2/B3) - 1.8V */
ALTERNATE(PIN_MASK(4, 0x1C), 0, MODULE_ADC, 0) /* ADC1 (GPIO44), ADC2 (GPIO43), ADC3 (GPIO42) */
ALTERNATE(PIN_MASK(4, 0xC0), 1, MODULE_SPI, GPIO_SEL_1P8V) /* SHI_SDO (GPIO47), SHI_SDI (GPIO46) */
ALTERNATE(PIN_MASK(5, 0x28), 1, MODULE_SPI, GPIO_SEL_1P8V) /* SHI_SCLK (GPIO55), SHI_CS# (GPIO53) */
ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* PWM3 (GPIO80) - KB_BL_PWM */
ALTERNATE(PIN_MASK(B, 0x80), 1, MODULE_PWM, 0) /* PWM5 (GPIOB7) - EDP_BKLTCTL */
ALTERNATE(PIN_MASK(D, 0x04), 1, MODULE_PMU, 0) /* PSL_IN1 (GPIOD2) - ACOK_OD */
ALTERNATE(PIN_MASK(0, 0x01), 1, MODULE_PMU, 0) /* PSL_IN2 (GPIO00) - EC_PWR_BTN_ODL */
ALTERNATE(PIN_MASK(0, 0x02), 1, MODULE_PMU, 0) /* PSL_IN3 (GPIO01) - LID_OPEN_EC */
ALTERNATE(PIN_MASK(0, 0x04), 1, MODULE_PMU, 0) /* PSL_IN4 (GPIO02) - RTC_EC_WAKE_ODL */
/* Keyboard */
#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP)
#define GPIO_KB_OUTPUT (GPIO_ODR_HIGH)
#define GPIO_KB_OUTPUT_COL2 (GPIO_OUT_LOW)
/* Keyboard alternate functions */
ALTERNATE(PIN_MASK(0, 0xE0), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT) /* KSO10 (GPIO07), KSO11 (GPIO06), KSO12 (GPIO05) */
ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT) /* KSO03 (GPIO16), KSO04 (GPIO15), KSO05 (GPIO14), KSO06 (GPIO13), KSO07 (GPIO12), KSO08 (GPIO11), KSO09 (GPIO10) */
ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_OUTPUT) /* KSO00 (GPIO21), KSO01 (GPIO20) */
ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI2 (GPIO27), KSI3 (GPIO26), KSI4 (GPIO25), KSI5 (GPIO24), KSI6 (GPIO23), KSI7 (GPIO22) */
ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI0 (GPIO31), KSI1 (GPIO30) */
GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_KB_OUTPUT_COL2) /* KSO02 (GPIO17) */
|
