1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
|
/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Twinkie dongle configuration */
#include "adc.h"
#include "adc_chip.h"
#include "common.h"
#include "console.h"
#include "gpio.h"
#include "hooks.h"
#include "i2c.h"
#include "registers.h"
#include "task.h"
#include "util.h"
#include "gpio_list.h"
/* Initialize board. */
void board_config_pre_init(void)
{
/* enable SYSCFG clock */
STM32_RCC_APB2ENR |= 1 << 0;
/* Remap USART DMA to match the USART driver */
STM32_SYSCFG_CFGR1 |= (1 << 9) | (1 << 10);/* Remap USART1 RX/TX DMA */
}
#ifdef CONFIG_SPI_FLASH
static void board_init_spi2(void)
{
/* Remap SPI2 to DMA channels 6 and 7 */
STM32_SYSCFG_CFGR1 |= (1 << 24);
/* Set pin NSS to general purpose output mode (01b). */
/* Set pins SCK, MISO, and MOSI to alternate function (10b). */
STM32_GPIO_MODER(GPIO_B) &= ~0xff000000;
STM32_GPIO_MODER(GPIO_B) |= 0xa9000000;
/* Set all four pins to alternate function 0 */
STM32_GPIO_AFRH(GPIO_B) &= ~(0xffff0000);
/* Set all four pins to output push-pull */
STM32_GPIO_OTYPER(GPIO_B) &= ~(0xf000);
/* Set pullup on NSS */
STM32_GPIO_PUPDR(GPIO_B) |= 0x1000000;
/* Set all four pins to high speed */
STM32_GPIO_OSPEEDR(GPIO_B) |= 0xff000000;
/* Reset SPI2 */
STM32_RCC_APB1RSTR |= (1 << 14);
STM32_RCC_APB1RSTR &= ~(1 << 14);
/* Enable clocks to SPI2 module */
STM32_RCC_APB1ENR |= STM32_RCC_PB1_SPI2;
}
/* Initialize board. */
static void board_init(void)
{
board_init_spi2();
}
DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
#endif /* CONFIG_SPI_FLASH */
/* ADC channels */
const struct adc_t adc_channels[] = {
/* USB PD CC lines sensing. Converted to mV (3300mV/4096). */
[ADC_CH_CC1_PD] = {"USB_C_CC1_PD", 3300, 4096, 0, STM32_AIN(1)},
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
/* I2C ports */
const struct i2c_port_t i2c_ports[] = {
{"master", I2C_PORT_MASTER, 400, GPIO_MCDP_I2C_SCL, GPIO_MCDP_I2C_SDA},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
|
