1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
|
/* Copyright 2018 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "atomic.h"
#include "charger.h"
#include "charge_manager.h"
#include "common.h"
#include "console.h"
#include "driver/charger/rt946x.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "registers.h"
#include "system.h"
#include "task.h"
#include "timer.h"
#include "util.h"
#include "usb_mux.h"
#include "usb_pd.h"
#include "usb_pd_tcpm.h"
#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args)
#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args)
static uint8_t vbus_en;
int board_vbus_source_enabled(int port)
{
return vbus_en;
}
int pd_check_vconn_swap(int port)
{
/*
* VCONN is provided directly by the battery (PPVAR_SYS)
* but use the same rules as power swap.
*/
return pd_get_dual_role(port) == PD_DRP_TOGGLE_ON ? 1 : 0;
}
int pd_set_power_supply_ready(int port)
{
pd_set_vbus_discharge(port, 0);
/* Provide VBUS */
vbus_en = 1;
charger_enable_otg_power(1);
/* notify host of power info change */
pd_send_host_event(PD_EVENT_POWER_CHANGE);
return EC_SUCCESS; /* we are ready */
}
void pd_power_supply_reset(int port)
{
int prev_en;
prev_en = vbus_en;
/* Disable VBUS */
vbus_en = 0;
charger_enable_otg_power(0);
/* Enable discharge if we were previously sourcing 5V */
if (prev_en)
pd_set_vbus_discharge(port, 1);
/* notify host of power info change */
pd_send_host_event(PD_EVENT_POWER_CHANGE);
}
/* ----------------- Vendor Defined Messages ------------------ */
#ifdef CONFIG_USB_PD_ALT_MODE_DFP
__override void svdm_dp_post_config(int port)
{
dp_flags[port] |= DP_FLAGS_DP_ON;
}
__override int svdm_dp_attention(int port, uint32_t *payload)
{
const struct usb_mux *mux = &usb_muxes[port];
int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]);
int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]);
int mf_pref = PD_VDO_DPSTS_MF_PREF(payload[1]);
dp_status[port] = payload[1];
mux->hpd_update(port, lvl, irq);
if (lvl)
usb_mux_set(port, mf_pref ? TYPEC_MUX_DOCK : TYPEC_MUX_DP,
USB_SWITCH_CONNECT, pd_get_polarity(port));
else
usb_mux_set(port, mf_pref ? TYPEC_MUX_USB : TYPEC_MUX_NONE,
USB_SWITCH_CONNECT, pd_get_polarity(port));
return 1;
}
__override void svdm_exit_dp_mode(int port)
{
const struct usb_mux *mux = &usb_muxes[port];
svdm_safe_dp_mode(port);
mux->hpd_update(port, 0, 0);
}
#endif /* CONFIG_USB_PD_ALT_MODE_DFP */
|
