1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
|
/* Copyright 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* EC for Samus board configuration */
#include "als.h"
#include "adc.h"
#include "adc_chip.h"
#include "backlight.h"
#include "battery.h"
#include "capsense.h"
#include "charger.h"
#include "charge_state.h"
#include "common.h"
#include "console.h"
#include "driver/accel_kionix.h"
#include "driver/accel_kxcj9.h"
#include "driver/accelgyro_lsm6ds0.h"
#include "driver/als_isl29035.h"
#include "driver/temp_sensor/tmp006.h"
#include "extpower.h"
#include "fan.h"
#include "gesture.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "i2c.h"
#include "keyboard_scan.h"
#include "keyboard_8042.h"
#include "keyboard_8042_sharedlib.h"
#include "lid_switch.h"
#include "lightbar.h"
#include "motion_sense.h"
#include "motion_lid.h"
#include "peci.h"
#include "power.h"
#include "power_button.h"
#include "pwm.h"
#include "pwm_chip.h"
#include "registers.h"
#include "switch.h"
#include "system.h"
#include "task.h"
#include "temp_sensor.h"
#include "temp_sensor_chip.h"
#include "timer.h"
#include "thermal.h"
#include "uart.h"
#include "util.h"
static void pd_mcu_interrupt(enum gpio_signal signal)
{
/* Exchange status with PD MCU. */
host_command_pd_send_status(PD_CHARGE_NO_CHANGE);
}
#include "gpio_list.h"
/* power signal list. Must match order of enum power_signal. */
const struct power_signal_info power_signal_list[] = {
{GPIO_PP1050_PGOOD, POWER_SIGNAL_ACTIVE_HIGH, "PGOOD_PP1050"},
{GPIO_PP1200_PGOOD, POWER_SIGNAL_ACTIVE_HIGH, "PGOOD_PP1200"},
{GPIO_PP1800_PGOOD, POWER_SIGNAL_ACTIVE_HIGH, "PGOOD_PP1800"},
{GPIO_VCORE_PGOOD, POWER_SIGNAL_ACTIVE_HIGH, "PGOOD_VCORE"},
{GPIO_PCH_SLP_S0_L, POWER_SIGNAL_ACTIVE_HIGH, "SLP_S0_DEASSERTED"},
{GPIO_PCH_SLP_S3_L, POWER_SIGNAL_ACTIVE_HIGH, "SLP_S3_DEASSERTED"},
{GPIO_PCH_SLP_S5_L, POWER_SIGNAL_ACTIVE_HIGH, "SLP_S5_DEASSERTED"},
{GPIO_PCH_SLP_SUS_L, POWER_SIGNAL_ACTIVE_HIGH, "SLP_SUS_DEASSERTED"},
{GPIO_PCH_SUSWARN_L, POWER_SIGNAL_ACTIVE_HIGH, "SUSWARN_DEASSERTED"},
};
BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT);
/* ADC channels. Must be in the exactly same order as in enum adc_channel. */
const struct adc_t adc_channels[] = {
/*
* EC internal temperature is calculated by
* 273 + (295 - 450 * ADC_VALUE / ADC_READ_MAX) / 2
* = -225 * ADC_VALUE / ADC_READ_MAX + 420.5
*/
{"ECTemp", LM4_ADC_SEQ0, -225, ADC_READ_MAX, 420,
LM4_AIN_NONE, 0x0e /* TS0 | IE0 | END0 */, 0, 0},
/*
* TODO(crosbug.com/p/23827): We don't know what to expect here, but
* it's an analog input that's pulled high. We're using it as a battery
* presence indicator for now. We'll return just 0 - ADC_READ_MAX for
* now.
*/
{"BatteryTemp", LM4_ADC_SEQ2, 1, 1, 0,
LM4_AIN(10), 0x06 /* IE0 | END0 */, LM4_GPIO_B, BIT(4)},
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */
const struct pwm_t pwm_channels[] = {
{4, 0},
};
BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
/* Physical fans. These are logically separate from pwm_channels. */
const struct fan_conf fan_conf_0 = {
.flags = FAN_USE_RPM_MODE,
.ch = 2, /* Use MFT id to control fan */
.pgood_gpio = -1,
.enable_gpio = -1,
};
const struct fan_conf fan_conf_1 = {
.flags = FAN_USE_RPM_MODE,
.ch = 3, /* Use MFT id to control fan */
.pgood_gpio = -1,
.enable_gpio = -1,
};
const struct fan_rpm fan_rpm_0 = {
.rpm_min = 1000,
.rpm_start = 1000,
.rpm_max = 6350,
};
struct fan_t fans[] = {
{ .conf = &fan_conf_0, .rpm = &fan_rpm_0, },
{ .conf = &fan_conf_1, .rpm = &fan_rpm_0, },
};
BUILD_ASSERT(ARRAY_SIZE(fans) == CONFIG_FANS);
/* I2C ports */
const struct i2c_port_t i2c_ports[] = {
{"batt_chg", 0, 100, GPIO_I2C0_SCL, GPIO_I2C0_SDA},
{"lightbar", 1, 400, GPIO_I2C1_SCL, GPIO_I2C1_SDA},
{"thermal", 5, 100, GPIO_I2C5_SCL, GPIO_I2C5_SDA},
};
const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
#define TEMP_U40_REG_ADDR_FLAGS (0x40 | I2C_FLAG_BIG_ENDIAN)
#define TEMP_U41_REG_ADDR_FLAGS (0x44 | I2C_FLAG_BIG_ENDIAN)
#define TEMP_U42_REG_ADDR_FLAGS (0x41 | I2C_FLAG_BIG_ENDIAN)
#define TEMP_U43_REG_ADDR_FLAGS (0x45 | I2C_FLAG_BIG_ENDIAN)
#define TEMP_U115_REG_ADDR_FLAGS (0x42 | I2C_FLAG_BIG_ENDIAN)
#define TEMP_U116_REG_ADDR_FLAGS (0x43 | I2C_FLAG_BIG_ENDIAN)
#define TEMP_U40_ADDR_FLAGS TMP006_ADDR(I2C_PORT_THERMAL,\
TEMP_U40_REG_ADDR_FLAGS)
#define TEMP_U41_ADDR_FLAGS TMP006_ADDR(I2C_PORT_THERMAL,\
TEMP_U41_REG_ADDR_FLAGS)
#define TEMP_U42_ADDR_FLAGS TMP006_ADDR(I2C_PORT_THERMAL,\
TEMP_U42_REG_ADDR_FLAGS)
#define TEMP_U43_ADDR_FLAGS TMP006_ADDR(I2C_PORT_THERMAL,\
TEMP_U43_REG_ADDR_FLAGS)
#define TEMP_U115_ADDR_FLAGS TMP006_ADDR(I2C_PORT_THERMAL,\
TEMP_U115_REG_ADDR_FLAGS)
#define TEMP_U116_ADDR_FLAGS TMP006_ADDR(I2C_PORT_THERMAL,\
TEMP_U116_REG_ADDR_FLAGS)
const struct tmp006_t tmp006_sensors[TMP006_COUNT] = {
{"Charger", TEMP_U40_ADDR_FLAGS},
{"CPU", TEMP_U41_ADDR_FLAGS},
{"Left C", TEMP_U42_ADDR_FLAGS},
{"Right C", TEMP_U43_ADDR_FLAGS},
{"Right D", TEMP_U115_ADDR_FLAGS},
{"Left D", TEMP_U116_ADDR_FLAGS},
};
BUILD_ASSERT(ARRAY_SIZE(tmp006_sensors) == TMP006_COUNT);
/* Temperature sensors data; must be in same order as enum temp_sensor_id. */
const struct temp_sensor_t temp_sensors[] = {
{"PECI", TEMP_SENSOR_TYPE_CPU, peci_temp_sensor_get_val, 0, 2},
{"ECInternal", TEMP_SENSOR_TYPE_BOARD, chip_temp_sensor_get_val, 0, 4},
{"I2C-Charger-Die", TEMP_SENSOR_TYPE_BOARD, tmp006_get_val, 0, 7},
{"I2C-Charger-Object", TEMP_SENSOR_TYPE_CASE, tmp006_get_val, 1, 7},
{"I2C-CPU-Die", TEMP_SENSOR_TYPE_BOARD, tmp006_get_val, 2, 7},
{"I2C-CPU-Object", TEMP_SENSOR_TYPE_CASE, tmp006_get_val, 3, 7},
{"I2C-Left C-Die", TEMP_SENSOR_TYPE_BOARD, tmp006_get_val, 4, 7},
{"I2C-Left C-Object", TEMP_SENSOR_TYPE_CASE, tmp006_get_val, 5, 7},
{"I2C-Right C-Die", TEMP_SENSOR_TYPE_BOARD, tmp006_get_val, 6, 7},
{"I2C-Right C-Object", TEMP_SENSOR_TYPE_CASE, tmp006_get_val, 7, 7},
{"I2C-Right D-Die", TEMP_SENSOR_TYPE_BOARD, tmp006_get_val, 8, 7},
{"I2C-Right D-Object", TEMP_SENSOR_TYPE_CASE, tmp006_get_val, 9, 7},
{"I2C-Left D-Die", TEMP_SENSOR_TYPE_BOARD, tmp006_get_val, 10, 7},
{"I2C-Left D-Object", TEMP_SENSOR_TYPE_CASE, tmp006_get_val, 11, 7},
{"Battery", TEMP_SENSOR_TYPE_BATTERY, charge_get_battery_temp, 0, 4},
};
BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);
/* ALS instances. Must be in same order as enum als_id. */
struct als_t als[] = {
{"ISL", isl29035_init, isl29035_read_lux, 5},
};
BUILD_ASSERT(ARRAY_SIZE(als) == ALS_COUNT);
/* Thermal limits for each temp sensor. All temps are in degrees K. Must be in
* same order as enum temp_sensor_id. To always ignore any temp, use 0.
*/
struct ec_thermal_config thermal_params[] = {
/* {Twarn, Thigh, Thalt}, fan_off, fan_max */
{{C_TO_K(95), C_TO_K(101), C_TO_K(104)},
{0, 0, 0}, C_TO_K(55), C_TO_K(90)}, /* PECI */
{{0, 0, 0}, {0, 0, 0}, 0, 0}, /* EC */
{{0, 0, 0}, {0, 0, 0}, C_TO_K(41), C_TO_K(55)}, /* Charger die */
{{0, 0, 0}, {0, 0, 0}, 0, 0},
{{0, 0, 0}, {0, 0, 0}, C_TO_K(35), C_TO_K(49)}, /* CPU die */
{{0, 0, 0}, {0, 0, 0}, 0, 0},
{{0, 0, 0}, {0, 0, 0}, 0, 0}, /* Left C die */
{{0, 0, 0}, {0, 0, 0}, 0, 0},
{{0, 0, 0}, {0, 0, 0}, 0, 0}, /* Right C die */
{{0, 0, 0}, {0, 0, 0}, 0, 0},
{{0, 0, 0}, {0, 0, 0}, 0, 0}, /* Right D die */
{{0, 0, 0}, {0, 0, 0}, 0, 0},
{{0, 0, 0}, {0, 0, 0}, C_TO_K(43), C_TO_K(54)}, /* Left D die */
{{0, 0, 0}, {0, 0, 0}, 0, 0},
{{0, 0, 0}, {0, 0, 0}, 0, 0}, /* Battery */
};
BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
struct keyboard_scan_config keyscan_config = {
.output_settle_us = 40,
.debounce_down_us = 6 * MSEC,
.debounce_up_us = 30 * MSEC,
.scan_period_us = 1500,
.min_post_scan_delay_us = 1000,
.poll_timeout_us = SECOND,
.actual_key_mask = {
0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
0xa4, 0xff, 0xf6, 0x55, 0xfa, 0xc8 /* full set */
},
};
/* Initialize board. */
static void board_init(void)
{
gpio_enable_interrupt(GPIO_PD_MCU_INT);
}
DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
#ifdef CONFIG_BATTERY_PRESENT_CUSTOM
/**
* Physical check of battery presence.
*/
enum battery_present battery_is_present(void)
{
/*
* This pin has a pullup, so if it's not completely pegged there's
* something attached. Probably a battery.
*/
int analog_val = adc_read_channel(ADC_CH_BAT_TEMP);
return analog_val < (9 * ADC_READ_MAX / 10) ? BP_YES : BP_NO;
}
#endif
static int discharging_on_ac;
/**
* Discharge battery when on AC power for factory test.
*/
int board_discharge_on_ac(int enable)
{
int rv = charger_discharge_on_ac(enable);
if (rv == EC_SUCCESS)
discharging_on_ac = enable;
return rv;
}
/**
* Check if we are discharging while connected to AC
*/
int board_is_discharging_on_ac(void)
{
return discharging_on_ac;
}
/**
* Reset PD MCU
*/
void board_reset_pd_mcu(void)
{
gpio_set_level(GPIO_USB_MCU_RST, 1);
usleep(100);
gpio_set_level(GPIO_USB_MCU_RST, 0);
}
void sensor_board_proc_double_tap(void)
{
lightbar_sequence(LIGHTBAR_TAP);
}
const int usb_port_enable[CONFIG_USB_PORT_POWER_SMART_PORT_COUNT] = {
GPIO_USB1_ENABLE,
GPIO_USB2_ENABLE,
};
/* Base Sensor mutex */
static struct mutex g_base_mutex;
/* Lid Sensor mutex */
static struct mutex g_lid_mutex;
/* kxcj9 local/private data */
struct kionix_accel_data g_kxcj9_data;
/* lsm6ds0 local sensor data (per-sensor) */
struct lsm6ds0_data g_saved_data[2];
/* Four Motion sensors */
/* Matrix to rotate accelrator into standard reference frame */
const mat33_fp_t base_standard_ref = {
{FLOAT_TO_FP(-1), 0, 0},
{ 0, FLOAT_TO_FP(-1), 0},
{ 0, 0, FLOAT_TO_FP(-1)}
};
const mat33_fp_t lid_standard_ref = {
{ 0, FLOAT_TO_FP(1), 0},
{FLOAT_TO_FP(-1), 0, 0},
{ 0, 0, FLOAT_TO_FP(-1)}
};
struct motion_sensor_t motion_sensors[] = {
/*
* Note: lsm6ds0: supports accelerometer and gyro sensor
* Requirement: accelerometer sensor must init before gyro sensor
* DO NOT change the order of the following table.
*/
{.name = "Base",
.active_mask = SENSOR_ACTIVE_S0_S3_S5,
.chip = MOTIONSENSE_CHIP_LSM6DS0,
.type = MOTIONSENSE_TYPE_ACCEL,
.location = MOTIONSENSE_LOC_BASE,
.drv = &lsm6ds0_drv,
.mutex = &g_base_mutex,
.drv_data = &g_saved_data[0],
.port = I2C_PORT_ACCEL,
.i2c_spi_addr_flags = LSM6DS0_ADDR1_FLAGS,
.rot_standard_ref = &base_standard_ref,
.default_range = 2, /* g, enough for laptop. */
.min_frequency = LSM6DS0_ACCEL_MIN_FREQ,
.max_frequency = LSM6DS0_ACCEL_MAX_FREQ,
.config = {
/* EC use accel for angle detection */
[SENSOR_CONFIG_EC_S0] = {
.odr = 119000 | ROUND_UP_FLAG,
.ec_rate = 100 * MSEC,
},
/* Used for double tap */
[SENSOR_CONFIG_EC_S3] = {
.odr = TAP_ODR_LSM6DS0 | ROUND_UP_FLAG,
.ec_rate = CONFIG_GESTURE_SAMPLING_INTERVAL_MS * MSEC,
},
[SENSOR_CONFIG_EC_S5] = {
.odr = TAP_ODR_LSM6DS0 | ROUND_UP_FLAG,
.ec_rate = CONFIG_GESTURE_SAMPLING_INTERVAL_MS * MSEC,
},
},
},
{.name = "Lid",
.active_mask = SENSOR_ACTIVE_S0,
.chip = MOTIONSENSE_CHIP_KXCJ9,
.type = MOTIONSENSE_TYPE_ACCEL,
.location = MOTIONSENSE_LOC_LID,
.drv = &kionix_accel_drv,
.mutex = &g_lid_mutex,
.drv_data = &g_kxcj9_data,
.port = I2C_PORT_ACCEL,
.i2c_spi_addr_flags = KXCJ9_ADDR0_FLAGS,
.rot_standard_ref = &lid_standard_ref,
.default_range = 2, /* g, enough for laptop. */
.min_frequency = KXCJ9_ACCEL_MIN_FREQ,
.max_frequency = KXCJ9_ACCEL_MAX_FREQ,
.config = {
/* EC use accel for angle detection */
[SENSOR_CONFIG_EC_S0] = {
.odr = 100000 | ROUND_UP_FLAG,
.ec_rate = 100 * MSEC,
},
},
},
{.name = "Base Gyro",
.active_mask = SENSOR_ACTIVE_S0_S3_S5,
.chip = MOTIONSENSE_CHIP_LSM6DS0,
.type = MOTIONSENSE_TYPE_GYRO,
.location = MOTIONSENSE_LOC_BASE,
.drv = &lsm6ds0_drv,
.mutex = &g_base_mutex,
.drv_data = &g_saved_data[1],
.port = I2C_PORT_ACCEL,
.i2c_spi_addr_flags = LSM6DS0_ADDR1_FLAGS,
.rot_standard_ref = NULL,
.default_range = 2000, /* g, enough for laptop. */
.min_frequency = LSM6DS0_GYRO_MIN_FREQ,
.max_frequency = LSM6DS0_GYRO_MAX_FREQ,
},
};
const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
#ifdef CONFIG_LOW_POWER_IDLE
void jtag_interrupt(enum gpio_signal signal)
{
/*
* This interrupt is the first sign someone is trying to use
* the JTAG. Disable slow speed sleep so that the JTAG action
* can take place.
*/
disable_sleep(SLEEP_MASK_JTAG);
/*
* Once we get this interrupt, disable it from occurring again
* to avoid repeated interrupts when debugging via JTAG.
*/
gpio_disable_interrupt(GPIO_JTAG_TCK);
}
#endif /* CONFIG_LOW_POWER_IDLE */
enum ec_error_list keyboard_scancode_callback(uint16_t *make_code,
int8_t pressed)
{
const uint16_t k = *make_code;
static uint8_t s;
static const uint16_t a[] = {
SCANCODE_UP, SCANCODE_UP, SCANCODE_DOWN, SCANCODE_DOWN,
SCANCODE_LEFT, SCANCODE_RIGHT, SCANCODE_LEFT, SCANCODE_RIGHT,
SCANCODE_B, SCANCODE_A};
if (!pressed)
return EC_SUCCESS;
/* Lightbar demo mode: keyboard can fake the battery state */
switch (k) {
case SCANCODE_UP:
demo_battery_level(1);
break;
case SCANCODE_DOWN:
demo_battery_level(-1);
break;
case SCANCODE_LEFT:
demo_is_charging(0);
break;
case SCANCODE_RIGHT:
demo_is_charging(1);
break;
case SCANCODE_F6: /* dim */
demo_brightness(-1);
break;
case SCANCODE_F7: /* bright */
demo_brightness(1);
break;
case SCANCODE_T:
demo_tap();
break;
}
if (k == a[s])
s++;
else if (k != a[0])
s = 0;
else if (s != 2)
s = 1;
if (s == ARRAY_SIZE(a)) {
s = 0;
lightbar_sequence(LIGHTBAR_KONAMI);
}
return EC_SUCCESS;
}
/*
* Use to define going in to hibernate early if low on battery.
* HIBERNATE_BATT_PCT specifies the low battery threshold
* for going into hibernate early, and HIBERNATE_BATT_SEC defines
* the minimum amount of time to stay in G3 before checking for low
* battery hibernate.
*/
#define HIBERNATE_BATT_PCT 10
#define HIBERNATE_BATT_SEC (3600 * 24)
__override enum critical_shutdown board_system_is_idle(
uint64_t last_shutdown_time, uint64_t *target, uint64_t now)
{
if (charge_get_percent() <= HIBERNATE_BATT_PCT) {
uint64_t t = last_shutdown_time + HIBERNATE_BATT_SEC * SEC_UL;
*target = MIN(*target, t);
}
return now > *target ?
CRITICAL_SHUTDOWN_HIBERNATE : CRITICAL_SHUTDOWN_IGNORE;
}
|