summaryrefslogtreecommitdiff
path: root/board/taeko/sensors.c
blob: b5d75460fe401100a9b30c94687c88d3476e0ab8 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
/* Copyright 2021 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

#include "common.h"
#include "accelgyro.h"
#include "adc_chip.h"
#include "driver/accel_bma422.h"
#include "driver/accel_bma4xx.h"
#include "driver/accel_lis2dw12.h"
#include "driver/accelgyro_lsm6dsm.h"
#include "driver/accelgyro_lsm6dso.h"
#include "fw_config.h"
#include "hooks.h"
#include "i2c.h"
#include "motion_sense.h"
#include "temp_sensor.h"
#include "thermal.h"
#include "temp_sensor/thermistor.h"

#if 0
#define CPRINTS(format, args...) ccprints(format, ## args)
#define CPRINTF(format, args...) ccprintf(format, ## args)
#else
#define CPRINTS(format, args...)
#define CPRINTF(format, args...)
#endif

/* ADC configuration */
const struct adc_t adc_channels[] = {
	[ADC_TEMP_SENSOR_1_DDR_SOC] = {
		.name = "TEMP_DDR_SOC",
		.input_ch = NPCX_ADC_CH0,
		.factor_mul = ADC_MAX_VOLT,
		.factor_div = ADC_READ_MAX + 1,
		.shift = 0,
	},
	[ADC_TEMP_SENSOR_2_FAN] = {
		.name = "TEMP_FAN",
		.input_ch = NPCX_ADC_CH1,
		.factor_mul = ADC_MAX_VOLT,
		.factor_div = ADC_READ_MAX + 1,
		.shift = 0,
	},
	[ADC_TEMP_SENSOR_3_CHARGER] = {
		.name = "TEMP_CHARGER",
		.input_ch = NPCX_ADC_CH6,
		.factor_mul = ADC_MAX_VOLT,
		.factor_div = ADC_READ_MAX + 1,
		.shift = 0,
	},
	[ADC_TEMP_SENSOR_4_CPUCHOKE] = {
		.name = "CPU_CHOKE",
		.input_ch = NPCX_ADC_CH7,
		.factor_mul = ADC_MAX_VOLT,
		.factor_div = ADC_READ_MAX + 1,
		.shift = 0,
	},
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);

K_MUTEX_DEFINE(g_lid_accel_mutex);
K_MUTEX_DEFINE(g_base_accel_mutex);
static struct stprivate_data g_lis2dw12_data;
static struct accelgyro_saved_data_t g_bma422_data;
static struct lsm6dso_data lsm6dso_data;
static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA;

/* TODO(b/201504044): calibrate the orientation matrix on later board stage */
#if 0
static const mat33_fp_t lid_standard_ref = {
	{ 0, FLOAT_TO_FP(1), 0},
	{ FLOAT_TO_FP(1), 0, 0},
	{ 0, 0, FLOAT_TO_FP(-1)}
};

static const mat33_fp_t base_standard_ref = {
	{ FLOAT_TO_FP(1), 0, 0},
	{ 0, FLOAT_TO_FP(-1), 0},
	{ 0, 0, FLOAT_TO_FP(-1)}
};
#endif


struct motion_sensor_t bma422_lid_accel = {
	.name = "Lid Accel - BMA",
	.active_mask = SENSOR_ACTIVE_S0_S3,
	.chip = MOTIONSENSE_CHIP_BMA422,
	.type = MOTIONSENSE_TYPE_ACCEL,
	.location = MOTIONSENSE_LOC_LID,
	.drv = &bma4_accel_drv,
	.mutex = &g_lid_accel_mutex,
	.drv_data = &g_bma422_data,
	.port = I2C_PORT_SENSOR,
	.i2c_spi_addr_flags = BMA4_I2C_ADDR_PRIMARY, /* 0x18 */
	.rot_standard_ref = NULL, /* identity matrix */
	.default_range = 2, /* g, enough for laptop. */
	.min_frequency = BMA4_ACCEL_MIN_FREQ,
	.max_frequency = BMA4_ACCEL_MAX_FREQ,
	.config = {
		/* EC use accel for angle detection */
		[SENSOR_CONFIG_EC_S0] = {
			.odr = 12500 | ROUND_UP_FLAG,
			.ec_rate = 100 * MSEC,
		},
		/* Sensor on in S3 */
		[SENSOR_CONFIG_EC_S3] = {
			.odr = 12500 | ROUND_UP_FLAG,
			.ec_rate = 0,
		},
	},
};

struct motion_sensor_t lsm6dsm_base_accel = {
	.name = "Base Accel",
	.active_mask = SENSOR_ACTIVE_S0_S3,
	.chip = MOTIONSENSE_CHIP_LSM6DSM,
	.type = MOTIONSENSE_TYPE_ACCEL,
	.location = MOTIONSENSE_LOC_BASE,
	.drv = &lsm6dsm_drv,
	.mutex = &g_base_accel_mutex,
	.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data,
			MOTIONSENSE_TYPE_ACCEL),
	.int_signal = GPIO_EC_IMU_INT_R_L,
	.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
	.port = I2C_PORT_SENSOR,
	.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
	.rot_standard_ref = NULL,
	.default_range = 4,  /* g, to meet CDD 7.3.1/C-1-4 reqs */
	.min_frequency = LSM6DSM_ODR_MIN_VAL,
	.max_frequency = LSM6DSM_ODR_MAX_VAL,
	.config = {
		/* EC use accel for angle detection */
		[SENSOR_CONFIG_EC_S0] = {
			.odr = 13000 | ROUND_UP_FLAG,
			.ec_rate = 100 * MSEC,
		},
		/* Sensor on for angle detection */
		[SENSOR_CONFIG_EC_S3] = {
			.odr = 10000 | ROUND_UP_FLAG,
			.ec_rate = 100 * MSEC,
		},
	},
};

struct motion_sensor_t lsm6dsm_base_gyro = {
	.name = "Base Gyro",
	.active_mask = SENSOR_ACTIVE_S0_S3,
	.chip = MOTIONSENSE_CHIP_LSM6DSM,
	.type = MOTIONSENSE_TYPE_GYRO,
	.location = MOTIONSENSE_LOC_BASE,
	.drv = &lsm6dsm_drv,
	.mutex = &g_base_accel_mutex,
	.drv_data = LSM6DSM_ST_DATA(lsm6dsm_data, MOTIONSENSE_TYPE_GYRO),
	.int_signal = GPIO_EC_IMU_INT_R_L,
	.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
	.port = I2C_PORT_SENSOR,
	.i2c_spi_addr_flags = LSM6DSM_ADDR0_FLAGS,
	.default_range = 1000 | ROUND_UP_FLAG, /* dps */
	.rot_standard_ref = NULL,
	.min_frequency = LSM6DSM_ODR_MIN_VAL,
	.max_frequency = LSM6DSM_ODR_MAX_VAL,
};

struct motion_sensor_t motion_sensors[] = {
	[LID_ACCEL] = {
		.name = "Lid Accel - ST",
		.active_mask = SENSOR_ACTIVE_S0_S3,
		.chip = MOTIONSENSE_CHIP_LIS2DW12,
		.type = MOTIONSENSE_TYPE_ACCEL,
		.location = MOTIONSENSE_LOC_LID,
		.drv = &lis2dw12_drv,
		.mutex = &g_lid_accel_mutex,
		.drv_data = &g_lis2dw12_data,
		.int_signal = GPIO_EC_ACCEL_INT_R_L,
		.port = I2C_PORT_SENSOR,
		.i2c_spi_addr_flags = LIS2DW12_ADDR1, /* 0x19 */
		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
		.rot_standard_ref = NULL, /* identity matrix */
		.default_range = 2, /* g */
		.min_frequency = LIS2DW12_ODR_MIN_VAL,
		.max_frequency = LIS2DW12_ODR_MAX_VAL,
		.config = {
			/* EC use accel for angle detection */
			[SENSOR_CONFIG_EC_S0] = {
				.odr = 12500 | ROUND_UP_FLAG,
			},
			/* Sensor on for lid angle detection */
			[SENSOR_CONFIG_EC_S3] = {
				.odr = 10000 | ROUND_UP_FLAG,
			},
		},
	},

	[BASE_ACCEL] = {
		.name = "Base Accel",
		.active_mask = SENSOR_ACTIVE_S0_S3,
		.chip = MOTIONSENSE_CHIP_LSM6DSO,
		.type = MOTIONSENSE_TYPE_ACCEL,
		.location = MOTIONSENSE_LOC_BASE,
		.drv = &lsm6dso_drv,
		.mutex = &g_base_accel_mutex,
		.drv_data = &lsm6dso_data,
		.int_signal = GPIO_EC_IMU_INT_R_L,
		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
		.port = I2C_PORT_SENSOR,
		.i2c_spi_addr_flags = LSM6DSO_ADDR0_FLAGS,
		.rot_standard_ref = NULL,
		.default_range = 4,  /* g */
		.min_frequency = LSM6DSO_ODR_MIN_VAL,
		.max_frequency = LSM6DSO_ODR_MAX_VAL,
		.config = {
			[SENSOR_CONFIG_EC_S0] = {
				.odr = 13000 | ROUND_UP_FLAG,
				.ec_rate = 100 * MSEC,
			},
			[SENSOR_CONFIG_EC_S3] = {
				.odr = 10000 | ROUND_UP_FLAG,
				.ec_rate = 100 * MSEC,
			},
		},
	},

	[BASE_GYRO] = {
		.name = "Base Gyro",
		.active_mask = SENSOR_ACTIVE_S0_S3,
		.chip = MOTIONSENSE_CHIP_LSM6DSO,
		.type = MOTIONSENSE_TYPE_GYRO,
		.location = MOTIONSENSE_LOC_BASE,
		.drv = &lsm6dso_drv,
		.mutex = &g_base_accel_mutex,
		.drv_data = &lsm6dso_data,
		.int_signal = GPIO_EC_IMU_INT_R_L,
		.flags = MOTIONSENSE_FLAG_INT_SIGNAL,
		.port = I2C_PORT_SENSOR,
		.i2c_spi_addr_flags = LSM6DSO_ADDR0_FLAGS,
		.default_range = 1000 | ROUND_UP_FLAG, /* dps */
		.rot_standard_ref = NULL,
		.min_frequency = LSM6DSO_ODR_MIN_VAL,
		.max_frequency = LSM6DSO_ODR_MAX_VAL,
	},

};

#ifdef CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
#else
const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
#endif


static void board_detect_motionsensor(void)
{
	int ret;
	int val;

	if (chipset_in_state(CHIPSET_STATE_ANY_OFF))
		return;

	/*
	 * b/194765820 - Dynamic motion sensor count
	 * All board supports tablet mode if board id > 0
	 */
	if (get_board_id() == 0 && !ec_cfg_has_tabletmode())
		return;

	/* Check lid accel chip */
	ret = i2c_read8(I2C_PORT_SENSOR, LIS2DW12_ADDR1,
			LIS2DW12_WHO_AM_I_REG, &val);
	if (ret == 0 && val == LIS2DW12_WHO_AM_I) {
		CPRINTS("LID_ACCEL is IS2DW12");
		/* Enable gpio interrupt for lid accel sensor */
		gpio_enable_interrupt(GPIO_EC_ACCEL_INT_R_L);
		return;
	}

	ret = i2c_read8(I2C_PORT_SENSOR, BMA4_I2C_ADDR_PRIMARY,
			BMA4_CHIP_ID_ADDR, &val);
	if (ret == 0 && val == BMA422_CHIP_ID) {
		CPRINTS("LID_ACCEL is BMA422");
		motion_sensors[LID_ACCEL] = bma422_lid_accel;
		/*
		 * The driver for BMA422 doesn't have code to support
		 * INT1. So, it doesn't need to enable interrupt.
		 * Vendor recommend to configure EC gpio as high-z if
		 * we don't use INT1. Keep this pin as input w/o enable
		 * interrupt.
		 */
		return;
	}

	/* Lid accel is not stuffed, don't allow line to float */
	gpio_disable_interrupt(GPIO_EC_ACCEL_INT_R_L);
	gpio_set_flags(GPIO_EC_ACCEL_INT_R_L, GPIO_INPUT | GPIO_PULL_DOWN);
	CPRINTS("No LID_ACCEL are detected");
}
DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_detect_motionsensor,
		HOOK_PRIO_DEFAULT);

static void baseboard_sensors_init(void)
{
	CPRINTS("baseboard_sensors_init");
	/* b/194765820
	 * Dynamic motion sensor count
	 * All board supports tablet mode if board id > 0
	 */
	if (ec_cfg_has_tabletmode()) {
		/*
		 * GPIO_EC_ACCEL_INT_R_L
		 * The interrupt of lid accel is disabled by default.
		 * We'll enable it later if lid accel is LIS2DW12.
		 */

		/* Change Request (b/199529373)
		 * GYRO sensor change from ST LSM6DSOETR3TR to ST LSM6DS3TR-C
		 *	LSM6DSOETR3TR base accel/gyro if board id = 0
		 *	LSM6DS3TR-C Base accel/gyro if board id > 0
		 */
		if (get_board_id() > 0) {
			motion_sensors[BASE_ACCEL] = lsm6dsm_base_accel;
			motion_sensors[BASE_GYRO] = lsm6dsm_base_gyro;
		}

		/* Enable gpio interrupt for base accelgyro sensor */
		gpio_enable_interrupt(GPIO_EC_IMU_INT_R_L);
	} else {
		CPRINTS("Clamshell");
		motion_sensor_count = 0;
		/* Gyro is not present, don't allow line to float */
		gpio_set_flags(GPIO_EC_IMU_INT_R_L, GPIO_INPUT |
				GPIO_PULL_DOWN);
	}
}
DECLARE_HOOK(HOOK_INIT, baseboard_sensors_init, HOOK_PRIO_INIT_I2C + 1);

void motion_interrupt(enum gpio_signal signal)
{
	if (motion_sensors[LID_ACCEL].chip == MOTIONSENSE_CHIP_LIS2DW12) {
		lis2dw12_interrupt(signal);
		CPRINTS("IS2DW12 interrupt");
		return;
	}

	/*
	 * From other project, ex. guybrush, it seem BMA422 doesn't have
	 * interrupt handler when EC_ACCEL_INT_R_L is asserted.
	 * However, I don't see BMA422 assert EC_ACCEL_INT_R_L when it has
	 * power. That could be the reason EC code doesn't register any
	 * interrupt handler.
	 */
	CPRINTS("BMA422 interrupt");

}

/* Temperature sensor configuration */
const struct temp_sensor_t temp_sensors[] = {
	[TEMP_SENSOR_1_DDR_SOC] = {
		.name = "DDR and SOC",
		.type = TEMP_SENSOR_TYPE_BOARD,
		.read = get_temp_3v3_30k9_47k_4050b,
		.idx = ADC_TEMP_SENSOR_1_DDR_SOC
	},
	[TEMP_SENSOR_2_FAN] = {
		.name = "FAN",
		.type = TEMP_SENSOR_TYPE_BOARD,
		.read = get_temp_3v3_30k9_47k_4050b,
		.idx = ADC_TEMP_SENSOR_2_FAN
	},
	[TEMP_SENSOR_3_CHARGER] = {
		.name = "CHARGER",
		.type = TEMP_SENSOR_TYPE_BOARD,
		.read = get_temp_3v3_30k9_47k_4050b,
		.idx = ADC_TEMP_SENSOR_3_CHARGER
	},
	[TEMP_SENSOR_4_CPUCHOKE] = {
		.name = "CPU CHOKE",
		.type = TEMP_SENSOR_TYPE_BOARD,
		.read = get_temp_3v3_30k9_47k_4050b,
		.idx = ADC_TEMP_SENSOR_4_CPUCHOKE
	},
};


BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);

/*
 * TODO(b/201021109): update for Alder Lake/brya
 *
 * Tiger Lake specifies 100 C as maximum TDP temperature.  THRMTRIP# occurs at
 * 130 C.  However, sensor is located next to DDR, so we need to use the lower
 * DDR temperature limit (100 C)
 */
/*
 * TODO(b/202062363): Remove when clang is fixed.
 */
#define THERMAL_CPU \
	{ \
		.temp_host = { \
			[EC_TEMP_THRESH_HIGH] = C_TO_K(90), \
			[EC_TEMP_THRESH_HALT] = C_TO_K(100), \
		}, \
		.temp_host_release = { \
			[EC_TEMP_THRESH_HIGH] = C_TO_K(85), \
		}, \
		.temp_fan_off = C_TO_K(35), \
		.temp_fan_max = C_TO_K(60), \
	}
__maybe_unused static const struct ec_thermal_config thermal_cpu = THERMAL_CPU;

/*
 * TODO(b/201021109): update for Alder Lake/brya
 *
 * Inductor limits - used for both charger and PP3300 regulator
 *
 * Need to use the lower of the charger IC, PP3300 regulator, and the inductors
 *
 * Charger max recommended temperature 100C, max absolute temperature 125C
 * PP3300 regulator: operating range -40 C to 145 C
 *
 * Inductors: limit of 125c
 * PCB: limit is 100c
 */
/*
 * TODO(b/202062363): Remove when clang is fixed.
 */
#define THERMAL_FAN \
	{ \
		.temp_host = { \
			[EC_TEMP_THRESH_HIGH] = C_TO_K(90), \
			[EC_TEMP_THRESH_HALT] = C_TO_K(100), \
		}, \
		.temp_host_release = { \
			[EC_TEMP_THRESH_HIGH] = C_TO_K(85), \
		}, \
		.temp_fan_off = C_TO_K(35), \
		.temp_fan_max = C_TO_K(60), \
	}
__maybe_unused static const struct ec_thermal_config thermal_fan = THERMAL_FAN;

/* this should really be "const" */
struct ec_thermal_config thermal_params[] = {
	[TEMP_SENSOR_1_DDR_SOC] = THERMAL_CPU,
	[TEMP_SENSOR_2_FAN] = THERMAL_FAN,
	[TEMP_SENSOR_3_CHARGER] = THERMAL_FAN,
	[TEMP_SENSOR_4_CPUCHOKE] = THERMAL_FAN,
};

BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);