summaryrefslogtreecommitdiff
path: root/board/volteer/battery.c
blob: 1c24e1ec2420c3b3b23f5af65376876a246c69d3 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
/* Copyright 2019 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 *
 * Battery pack vendor provided charging profile
 */

#include "battery_fuel_gauge.h"
#include "common.h"
#include "util.h"

/*
 * Battery info for all Volteer battery types. Note that the fields
 * start_charging_min/max and charging_min/max are not used for the charger.
 * The effective temperature limits are given by discharging_min/max_c.
 *
 * Fuel Gauge (FG) parameters which are used for determining if the battery
 * is connected, the appropriate ship mode (battery cutoff) command, and the
 * charge/discharge FETs status.
 *
 * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
 * register. For some batteries, the charge/discharge FET bits are set when
 * charging/discharging is active, in other types, these bits set mean that
 * charging/discharging is disabled. Therefore, in addition to the mask for
 * these bits, a disconnect value must be specified. Note that for TI fuel
 * gauge, the charge/discharge FET status is found in Operation Status (0x54),
 * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
 * Operation status which contains the FET status bits.
 *
 * The assumption for battery types supported is that the charge/discharge FET
 * status can be read with a sb_read() command and therefore, only the register
 * address, mask, and disconnect value need to be provided.
 */
const struct board_batt_params board_battery_info[] = {
	/* LGC\011 L17L3PB0 Battery Information */
	/*
	 * Battery info provided by ODM on b/143477210, comment #11
	 */
	[BATTERY_LGC011] = {
		.fuel_gauge = {
			.manuf_name = "LGC",
			.ship_mode = {
				.reg_addr = 0x00,
				.reg_data = { 0x10, 0x10 },
			},
			.fet = {
				.reg_addr = 0x0,
				.reg_mask = 0x6000,
				.disconnect_val = 0x6000,
			}
		},
		.batt_info = {
			.voltage_max		= TARGET_WITH_MARGIN(13200, 5),
			.voltage_normal		= 11550, /* mV */
			.voltage_min		= 9000, /* mV */
			.precharge_current	= 256,	/* mA */
			.start_charging_min_c	= 0,
			.start_charging_max_c	= 45,
			.charging_min_c		= 0,
			.charging_max_c		= 60,
			.discharging_min_c	= 0,
			.discharging_max_c	= 75,
		},
	},
};
BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);

const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_LGC011;