1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
|
/* Copyright 2020 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*
* Power and battery LED control for Volteer
*/
#include "charge_manager.h"
#include "common.h"
#include "ec_commands.h"
#include "hooks.h"
#include "led_common.h"
#include "led_pwm.h"
#include "pwm.h"
const enum ec_led_id supported_led_ids[] = {
EC_LED_ID_POWER_LED,
};
const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
struct pwm_led led_color_map[] = {
/* Red, Green, Blue */
[EC_LED_COLOR_RED] = { 100, 0, 0 },
[EC_LED_COLOR_GREEN] = { 0, 100, 0 },
[EC_LED_COLOR_BLUE] = { 0, 0, 100 },
/* The green LED seems to be brighter than the others, so turn down
* green from its natural level for these secondary colors.
*/
[EC_LED_COLOR_YELLOW] = { 100, 70, 0 },
[EC_LED_COLOR_WHITE] = { 100, 70, 100 },
[EC_LED_COLOR_AMBER] = { 100, 20, 0 },
};
#ifndef CONFIG_ZEPHYR
struct pwm_led pwm_leds[] = {
/* 2 RGB diffusers controlled by 1 set of 3 channels. */
[PWM_LED0] = {
.ch0 = PWM_CH_LED3_RED,
.ch1 = PWM_CH_LED2_GREEN,
.ch2 = PWM_CH_LED1_BLUE,
.enable = &pwm_enable,
.set_duty = &pwm_set_duty,
},
};
#endif
void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
{
brightness_range[EC_LED_COLOR_RED] = 255;
brightness_range[EC_LED_COLOR_GREEN] = 255;
brightness_range[EC_LED_COLOR_BLUE] = 255;
}
int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
{
enum pwm_led_id pwm_id;
/* Convert ec_led_id to pwm_led_id. */
if (led_id == EC_LED_ID_POWER_LED)
pwm_id = PWM_LED0;
else
return EC_ERROR_UNKNOWN;
if (brightness[EC_LED_COLOR_RED])
set_pwm_led_color(pwm_id, EC_LED_COLOR_RED);
else if (brightness[EC_LED_COLOR_GREEN])
set_pwm_led_color(pwm_id, EC_LED_COLOR_GREEN);
else if (brightness[EC_LED_COLOR_BLUE])
set_pwm_led_color(pwm_id, EC_LED_COLOR_BLUE);
else if (brightness[EC_LED_COLOR_YELLOW])
set_pwm_led_color(pwm_id, EC_LED_COLOR_YELLOW);
else if (brightness[EC_LED_COLOR_WHITE])
set_pwm_led_color(pwm_id, EC_LED_COLOR_WHITE);
else if (brightness[EC_LED_COLOR_AMBER])
set_pwm_led_color(pwm_id, EC_LED_COLOR_AMBER);
else
/* Otherwise, the "color" is "off". */
set_pwm_led_color(pwm_id, -1);
return EC_SUCCESS;
}
/* Illuminates the LED on the side of the active charging port. If not charging,
* illuminates both LEDs.
*/
static void led_set_charge_port_tick(void)
{
int port;
int side_select_duty;
port = charge_manager_get_active_charge_port();
switch (port) {
case 0:
side_select_duty = 100;
break;
case 1:
side_select_duty = 0;
break;
default:
side_select_duty = 50;
}
if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED))
pwm_set_duty(PWM_CH_LED4_SIDESEL, side_select_duty);
}
DECLARE_HOOK(HOOK_TICK, led_set_charge_port_tick, HOOK_PRIO_DEFAULT);
static void board_led_init(void)
{
/* Illuminate motherboard and daughter board LEDs equally to start. */
pwm_enable(PWM_CH_LED4_SIDESEL, 1);
pwm_set_duty(PWM_CH_LED4_SIDESEL, 50);
}
DECLARE_HOOK(HOOK_INIT, board_led_init, HOOK_PRIO_DEFAULT);
|