1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
|
/* Copyright 2015 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* SPI module for Chrome EC */
#include "clock.h"
#include "console.h"
#include "gpio.h"
#include "hooks.h"
#include "registers.h"
#include "spi.h"
#include "task.h"
#include "timer.h"
#include "util.h"
/* Console output macros */
#define CPUTS(outstr) cputs(CC_SPI, outstr)
#define CPRINTS(format, args...) cprints(CC_SPI, format, ##args)
enum sspi_clk_sel {
sspi_clk_24mhz = 0,
sspi_clk_12mhz,
sspi_clk_8mhz,
sspi_clk_6mhz,
sspi_clk_4p8mhz,
sspi_clk_4mhz,
sspi_clk_3p428mhz,
sspi_clk_3mhz,
};
enum sspi_ch_sel {
SSPI_CH_CS0 = 0,
SSPI_CH_CS1,
};
static void sspi_frequency(enum sspi_clk_sel freq)
{
/*
* bit[6:5]
* Bit 6:Clock Polarity (CLPOL)
* 0: SSCK is low in the idle mode.
* 1: SSCK is high in the idle mode.
* Bit 5:Clock Phase (CLPHS)
* 0: Latch data on the first SSCK edge.
* 1: Latch data on the second SSCK edge.
*
* bit[4:2]
* 000b: 1/2 clk_sspi
* 001b: 1/4 clk_sspi
* 010b: 1/6 clk_sspi
* 011b: 1/8 clk_sspi
* 100b: 1/10 clk_sspi
* 101b: 1/12 clk_sspi
* 110b: 1/14 clk_sspi
* 111b: 1/16 clk_sspi
*
* SSCK frequency is [freq] MHz and mode 3.
* note, clk_sspi need equal to 48MHz above.
*/
IT83XX_SSPI_SPICTRL1 |= (0x60 | (freq << 2));
}
static void sspi_transmission_end(void)
{
/* Write 1 to end the SPI transmission. */
IT83XX_SSPI_SPISTS = 0x20;
/* Short delay for "Transfer End Flag" */
IT83XX_GCTRL_WNCKR = 0;
/* Write 1 to clear this bit and terminate data transmission. */
IT83XX_SSPI_SPISTS = 0x02;
}
/* We assume only one SPI port in the chip, one SPI device */
int spi_enable(const struct spi_device_t *spi_device, int enable)
{
int port = spi_device->port;
if (enable) {
/*
* bit[5:4]
* 00b: SPI channel 0 and channel 1 are disabled.
* 10b: SSCK/SMOSI/SMISO/SSCE1# are enabled.
* 01b: SSCK/SMOSI/SMISO/SSCE0# are enabled.
* 11b: SSCK/SMOSI/SMISO/SSCE1#/SSCE0# are enabled.
*/
if (port == SSPI_CH_CS1)
IT83XX_GPIO_GRC1 |= 0x20;
else
IT83XX_GPIO_GRC1 |= 0x10;
gpio_config_module(MODULE_SPI_CONTROLLER, 1);
} else {
if (port == SSPI_CH_CS1)
IT83XX_GPIO_GRC1 &= ~0x20;
else
IT83XX_GPIO_GRC1 &= ~0x10;
gpio_config_module(MODULE_SPI_CONTROLLER, 0);
}
return EC_SUCCESS;
}
int spi_transaction(const struct spi_device_t *spi_device,
const uint8_t *txdata, int txlen, uint8_t *rxdata,
int rxlen)
{
int idx;
uint8_t port = spi_device->port;
static struct mutex spi_mutex;
mutex_lock(&spi_mutex);
/* bit[0]: Write cycle */
IT83XX_SSPI_SPICTRL2 &= ~0x04;
for (idx = 0x00; idx < txlen; idx++) {
IT83XX_SSPI_SPIDATA = txdata[idx];
if (port == SSPI_CH_CS1)
/* Write 1 to start the data transmission of CS1 */
IT83XX_SSPI_SPISTS |= 0x08;
else
/* Write 1 to start the data transmission of CS0 */
IT83XX_SSPI_SPISTS |= 0x10;
}
/* bit[1]: Read cycle */
IT83XX_SSPI_SPICTRL2 |= 0x04;
for (idx = 0x00; idx < rxlen; idx++) {
if (port == SSPI_CH_CS1)
/* Write 1 to start the data transmission of CS1 */
IT83XX_SSPI_SPISTS |= 0x08;
else
/* Write 1 to start the data transmission of CS0 */
IT83XX_SSPI_SPISTS |= 0x10;
rxdata[idx] = IT83XX_SSPI_SPIDATA;
}
sspi_transmission_end();
mutex_unlock(&spi_mutex);
return EC_SUCCESS;
}
static void sspi_init(void)
{
int i;
clock_enable_peripheral(CGC_OFFSET_SSPI, 0, 0);
sspi_frequency(sspi_clk_8mhz);
/*
* bit[5:3] Byte Width (BYTEWIDTH)
* 000b: 8-bit transmission
* 001b: 1-bit transmission
* 010b: 2-bit transmission
* 011b: 3-bit transmission
* 100b: 4-bit transmission
* 101b: 5-bit transmission
* 110b: 6-bit transmission
* 111b: 7-bit transmission
*
* bit[1] Blocking selection
*/
IT83XX_SSPI_SPICTRL2 |= 0x02;
for (i = 0; i < spi_devices_used; i++)
/* Disabling spi module */
spi_enable(&spi_devices[i], 0);
}
DECLARE_HOOK(HOOK_INIT, sspi_init, HOOK_PRIO_INIT_SPI);
|