1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
|
/* Copyright 2014 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Functions needed by keyboard scanner module for Chrome EC */
#include "common.h"
#include "keyboard_raw.h"
#include "keyboard_scan.h"
#include "clock.h"
#include "gpio.h"
#include "registers.h"
#include "task.h"
/**
* Initialize the raw keyboard interface.
*/
void keyboard_raw_init(void)
{
/* Enable clock for KBS peripheral */
clock_enable_peripheral(CGC_OFFSET_KBS, CGC_KBS_MASK,
CGC_MODE_RUN | CGC_MODE_SLEEP);
/* Ensure top-level interrupt is disabled */
keyboard_raw_enable_interrupt(0);
/*
* Select quasi-bidirectional buffers for KSO pins. It reduces the
* low-to-high transition time. This feature only supports in npcx7.
*/
#ifdef CONFIG_KEYBOARD_KSO_HIGH_DRIVE
SET_FIELD(NPCX_KBSCTL, NPCX_KBHDRV_FIELD, 0x01);
#endif
/* pull-up KBSIN 0-7 internally */
NPCX_KBSINPU = 0xFF;
/* Disable automatic scan mode */
CLEAR_BIT(NPCX_KBSCTL, NPCX_KBSMODE);
/* Disable automatic interrupt enable */
CLEAR_BIT(NPCX_KBSCTL, NPCX_KBSIEN);
/* Disable increment enable */
CLEAR_BIT(NPCX_KBSCTL, NPCX_KBSINC);
/* Set KBSOUT to zero to detect key-press */
NPCX_KBSOUT0 = 0x00;
NPCX_KBSOUT1 = 0x00;
gpio_config_module(MODULE_KEYBOARD_SCAN, 1);
/*
* Enable interrupts for the inputs. The top-level interrupt is still
* masked off, so this won't trigger interrupts yet.
*/
/* Clear pending input sources used by scanner */
NPCX_WKPCL(MIWU_TABLE_WKKEY, MIWU_GROUP_WKKEY) = 0xFF;
/* Enable Wake-up Button */
NPCX_WKEN(MIWU_TABLE_WKKEY, MIWU_GROUP_WKKEY) = 0xFF;
/* Select high to low transition (falling edge) */
NPCX_WKEDG(MIWU_TABLE_WKKEY, MIWU_GROUP_WKKEY) = 0xFF;
/* Enable interrupt of WK KBS */
keyboard_raw_enable_interrupt(1);
}
/**
* Finish initialization after task scheduling has started.
*/
void keyboard_raw_task_start(void)
{
/* Enable MIWU to trigger KBS interrupt */
task_enable_irq(NPCX_IRQ_KSI_WKINTC_1);
}
/**
* Drive the specified column low.
*/
test_mockable void keyboard_raw_drive_column(int col)
{
/*
* Nuvoton Keyboard Scan IP supports 18x8 Matrix
* It also support automatic scan functionality
*/
uint32_t mask, col_out;
/* Add support for CONFIG_KEYBOARD_KSO_BASE shifting */
col_out = col + CONFIG_KEYBOARD_KSO_BASE;
/* Drive all lines to high */
if (col == KEYBOARD_COLUMN_NONE) {
mask = ~0;
#if defined(CONFIG_KEYBOARD_CUSTOMIZATION)
board_keyboard_drive_col(col);
#elif defined(CONFIG_KEYBOARD_COL2_INVERTED)
gpio_set_level(GPIO_KBD_KSO2, 0);
#endif
}
/* Set KBSOUT to zero to detect key-press */
else if (col == KEYBOARD_COLUMN_ALL) {
mask = ~(BIT(keyboard_cols) - 1);
#if defined(CONFIG_KEYBOARD_CUSTOMIZATION)
board_keyboard_drive_col(col);
#elif defined(CONFIG_KEYBOARD_COL2_INVERTED)
gpio_set_level(GPIO_KBD_KSO2, 1);
#endif
}
/* Drive one line for detection */
else {
#if defined(CONFIG_KEYBOARD_CUSTOMIZATION)
board_keyboard_drive_col(col);
#elif defined(CONFIG_KEYBOARD_COL2_INVERTED)
if (col == 2)
gpio_set_level(GPIO_KBD_KSO2, 1);
else
gpio_set_level(GPIO_KBD_KSO2, 0);
#endif
mask = ~BIT(col_out);
}
/* Set KBSOUT */
NPCX_KBSOUT0 = (mask & 0xFFFF);
NPCX_KBSOUT1 = ((mask >> 16) & 0x03);
}
/**
* Read raw row state.
* Bits are 1 if signal is present, 0 if not present.
*/
test_mockable int keyboard_raw_read_rows(void)
{
/* Bits are active-low, so invert returned levels */
return (~NPCX_KBSIN) & KB_ROW_MASK;
}
/**
* Enable or disable keyboard interrupts.
*/
void keyboard_raw_enable_interrupt(int enable)
{
if (enable)
task_enable_irq(NPCX_IRQ_KSI_WKINTC_1);
else
task_disable_irq(NPCX_IRQ_KSI_WKINTC_1);
}
/*
* Interrupt handler for the entire GPIO bank of keyboard rows.
*/
void keyboard_raw_interrupt(void)
{
/* Clear pending input sources used by scanner */
NPCX_WKPCL(MIWU_TABLE_WKKEY, MIWU_GROUP_WKKEY) = 0xFF;
/* Wake the scan task */
task_wake(TASK_ID_KEYSCAN);
}
DECLARE_IRQ(NPCX_IRQ_KSI_WKINTC_1, keyboard_raw_interrupt, 5);
int keyboard_raw_is_input_low(int port, int id)
{
return (NPCX_PDIN(port) & BIT(id)) == 0;
}
|
