1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
|
/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* PWM control module for NPCX.
*
* On this chip, the PWM logic is implemented by the hardware FAN modules.
*/
#include "clock.h"
#include "clock_chip.h"
#include "fan.h"
#include "gpio.h"
#include "hooks.h"
#include "pwm.h"
#include "pwm_chip.h"
#include "registers.h"
#include "util.h"
#include "console.h"
#if !(DEBUG_PWM)
#define CPRINTS(...)
#else
#define CPRINTS(format, args...) cprints(CC_PWM, format, ## args)
#endif
/* PWM clock source */
enum npcx_pwm_source_clock {
NPCX_PWM_CLOCK_APB2_LFCLK = 0,
NPCX_PWM_CLOCK_FX = 1,
NPCX_PWM_CLOCK_FR = 2,
NPCX_PWM_CLOCK_RESERVED = 3,
NPCX_PWM_CLOCK_UNDEF = 0xFF
};
/* PWM heartbeat mode */
enum npcx_pwm_heartbeat_mode {
NPCX_PWM_HBM_NORMAL = 0,
NPCX_PWM_HBM_25 = 1,
NPCX_PWM_HBM_50 = 2,
NPCX_PWM_HBM_100 = 3,
NPCX_PWM_HBM_UNDEF = 0xFF
};
/* Default duty cycle resolution */
#define DUTY_CYCLE_RESOLUTION 100
/**
* Set PWM operation clock.
*
* @param ch operation channel
* @param freq desired PWM frequency
* @param res resolution for duty cycle
* @notes changed when initialization
*/
void pwm_set_freq(enum pwm_channel ch, uint32_t freq, uint32_t res)
{
int mdl = pwm_channels[ch].channel;
uint32_t prescaler_divider = 0;
uint32_t clock;
/* Disable PWM for module configuration */
pwm_enable(ch, 0);
/*
* Get PWM clock frequency. Use internal 32K as PWM clock source if
* the PWM must be active during low-power idle.
*/
if (pwm_channels[ch].flags & PWM_CONFIG_DSLEEP)
clock = INT_32K_CLOCK;
else
clock = clock_get_apb2_freq();
/*
* Using PWM Frequency and Resolution we calculate
* prescaler for input clock
*/
prescaler_divider = ((clock / freq)/res);
/* Set clock prescaler divider to PWM module*/
if (prescaler_divider >= 1)
prescaler_divider = prescaler_divider - 1;
if (prescaler_divider > 0xFFFF)
prescaler_divider = 0xFFFF;
/* Configure computed prescaler and resolution */
NPCX_PRSC(mdl) = (uint16_t)prescaler_divider;
/* Set PWM cycle time */
NPCX_CTR(mdl) = res - 1;
/* Set the duty cycle to 0% since DCR > CTR */
NPCX_DCR(mdl) = res;
}
/**
* Set PWM enabled.
*
* @param ch operation channel
* @param enabled enabled flag
* @return none
*/
void pwm_enable(enum pwm_channel ch, int enabled)
{
int mdl = pwm_channels[ch].channel;
/* Start or close PWM module */
UPDATE_BIT(NPCX_PWMCTL(mdl), NPCX_PWMCTL_PWR, enabled);
}
/**
* Check PWM enabled.
*
* @param ch operation channel
* @return enabled or not
*/
int pwm_get_enabled(enum pwm_channel ch)
{
int mdl = pwm_channels[ch].channel;
return IS_BIT_SET(NPCX_PWMCTL(mdl), NPCX_PWMCTL_PWR);
}
/**
* Set PWM duty cycle.
*
* @param ch operation channel
* @param percent duty cycle percent
* @return none
*/
void pwm_set_duty(enum pwm_channel ch, int percent)
{
int mdl = pwm_channels[ch].channel;
uint32_t dc_res = 0;
uint16_t dc_cnt = 0;
/* Checking duty value first */
if (percent < 0)
percent = 0;
else if (percent > 100)
percent = 100;
CPRINTS("pwm%d, set duty=%d", mdl, percent);
/* Assume the fan control is active high and invert it ourselves */
UPDATE_BIT(NPCX_PWMCTL(mdl), NPCX_PWMCTL_INVP,
(pwm_channels[ch].flags & PWM_CONFIG_ACTIVE_LOW));
dc_res = NPCX_CTR(mdl) + 1;
dc_cnt = (percent*dc_res)/100;
CPRINTS("freq=0x%x", pwm_channels[ch].freq);
CPRINTS("duty_cycle_res=%d", dc_res);
CPRINTS("duty_cycle_cnt=%d", dc_cnt);
/* Set the duty cycle */
if (percent > 0) {
if (percent == 100)
NPCX_DCR(mdl) = NPCX_CTR(mdl);
else
NPCX_DCR(mdl) = (dc_cnt - 1);
pwm_enable(ch, 1);
} else {
/* Output low since DCR > CTR */
NPCX_DCR(mdl) = NPCX_CTR(mdl) + 1;
pwm_enable(ch, 0);
}
}
/**
* Get PWM duty cycle.
*
* @param ch operation channel
* @return duty cycle percent
*/
int pwm_get_duty(enum pwm_channel ch)
{
int mdl = pwm_channels[ch].channel;
/* Return percent */
if ((!pwm_get_enabled(ch)) || (NPCX_DCR(mdl) > NPCX_CTR(mdl)))
return 0;
else
return ((NPCX_DCR(mdl) + 1) * 100) / (NPCX_CTR(mdl) + 1);
}
/**
* PWM configuration.
*
* @param ch operation channel
* @return none
*/
void pwm_config(enum pwm_channel ch)
{
int mdl = pwm_channels[ch].channel;
/* Disable PWM for module configuration */
pwm_enable(ch, 0);
/* Set PWM heartbeat mode is no heartbeat */
SET_FIELD(NPCX_PWMCTL(mdl), NPCX_PWMCTL_HB_DC_CTL_FIELD,
NPCX_PWM_HBM_NORMAL);
/* Select default CLK or LFCLK clock input to PWM module */
SET_FIELD(NPCX_PWMCTLEX(mdl), NPCX_PWMCTLEX_FCK_SEL_FIELD,
NPCX_PWM_CLOCK_APB2_LFCLK);
/* Set PWM polarity normal first */
CLEAR_BIT(NPCX_PWMCTL(mdl), NPCX_PWMCTL_INVP);
/* Select PWM clock source */
UPDATE_BIT(NPCX_PWMCTL(mdl), NPCX_PWMCTL_CKSEL,
(pwm_channels[ch].flags & PWM_CONFIG_DSLEEP));
/* Set PWM operation frequency */
pwm_set_freq(ch, pwm_channels[ch].freq, DUTY_CYCLE_RESOLUTION);
}
/**
* PWM initial.
*
* @param none
* @return none
*/
static void pwm_init(void)
{
int i;
uint8_t pd_mask = 0;
/* Take enabled PWMs out of power-down state */
for (i = 0; i < PWM_CH_COUNT; i++)
pd_mask |= (1 << pwm_channels[i].channel);
clock_enable_peripheral(CGC_OFFSET_PWM, pd_mask, CGC_MODE_ALL);
for (i = 0; i < PWM_CH_COUNT; i++)
pwm_config(i);
}
/* The chip-specific fan module initializes before this. */
DECLARE_HOOK(HOOK_INIT, pwm_init, HOOK_PRIO_INIT_PWM);
|