1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
|
/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*
* Battery charging task and state machine.
*/
#include "battery.h"
#include "battery_smart.h"
#include "charge_manager.h"
#include "charger_profile_override.h"
#include "charge_state.h"
#include "charger.h"
#include "chipset.h"
#include "common.h"
#include "console.h"
#include "ec_ec_comm_slave.h"
#include "extpower.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "i2c.h"
#include "math_util.h"
#include "printf.h"
#include "system.h"
#include "task.h"
#include "timer.h"
#include "util.h"
/* Console output macros */
#define CPUTS(outstr) cputs(CC_CHARGER, outstr)
#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ## args)
#define CRITICAL_BATTERY_SHUTDOWN_TIMEOUT_US \
(CONFIG_BATTERY_CRITICAL_SHUTDOWN_TIMEOUT * SECOND)
#define PRECHARGE_TIMEOUT_US (PRECHARGE_TIMEOUT * SECOND)
#define LFCC_EVENT_THRESH 5 /* Full-capacity change reqd for host event */
/* Prior to negotiating PD, most PD chargers advertise 15W */
#define LIKELY_PD_USBC_POWER_MW 15000
/*
* State for charger_task(). Here so we can reset it on a HOOK_INIT, and
* because stack space is more limited than .bss
*/
static const struct battery_info *batt_info;
static struct charge_state_data curr;
static int prev_ac, prev_charge, prev_full;
static enum battery_present prev_bp;
static int is_full; /* battery not accepting current */
static enum ec_charge_control_mode chg_ctl_mode;
static int manual_mode; /* volt/curr are no longer maintained by charger */
static unsigned int user_current_limit = -1U;
test_export_static timestamp_t shutdown_warning_time;
static timestamp_t precharge_start_time;
/* Is battery connected but unresponsive after precharge? */
static int battery_seems_to_be_dead;
static int battery_seems_to_be_disconnected;
/*
* Was battery removed? Set when we see BP_NO, cleared after the battery is
* reattached and becomes responsive. Used to indicate an error state after
* removal and trigger re-reading the battery static info when battery is
* reattached and responsive.
*/
static int battery_was_removed;
static int problems_exist;
static int debugging;
/* Track problems in communicating with the battery or charger */
enum problem_type {
PR_STATIC_UPDATE,
PR_SET_VOLTAGE,
PR_SET_CURRENT,
PR_SET_MODE,
PR_SET_INPUT_CURR,
PR_POST_INIT,
PR_CHG_FLAGS,
PR_BATT_FLAGS,
PR_CUSTOM,
NUM_PROBLEM_TYPES
};
static const char * const prob_text[] = {
"static update",
"set voltage",
"set current",
"set mode",
"set input current",
"post init",
"chg params",
"batt params",
"custom profile",
};
BUILD_ASSERT(ARRAY_SIZE(prob_text) == NUM_PROBLEM_TYPES);
/*
* TODO(crosbug.com/p/27639): When do we decide a problem is real and not
* just intermittent? And what do we do about it?
*/
static void problem(enum problem_type p, int v)
{
static int __bss_slow last_prob_val[NUM_PROBLEM_TYPES];
static timestamp_t __bss_slow last_prob_time[NUM_PROBLEM_TYPES];
timestamp_t t_now, t_diff;
if (last_prob_val[p] != v) {
t_now = get_time();
t_diff.val = t_now.val - last_prob_time[p].val;
CPRINTS("charge problem: %s, 0x%x -> 0x%x after %.6lds",
prob_text[p], last_prob_val[p], v, t_diff.val);
last_prob_val[p] = v;
last_prob_time[p] = t_now;
}
problems_exist = 1;
}
#ifdef HAS_TASK_HOSTCMD
/* Returns zero if every item was updated. */
static int update_static_battery_info(void)
{
char *batt_str;
int batt_serial;
/*
* The return values have type enum ec_error_list, but EC_SUCCESS is
* zero. We'll just look for any failures so we can try them all again.
*/
int rv;
/* Smart battery serial number is 16 bits */
batt_str = (char *)host_get_memmap(EC_MEMMAP_BATT_SERIAL);
memset(batt_str, 0, EC_MEMMAP_TEXT_MAX);
rv = battery_serial_number(&batt_serial);
if (!rv)
snprintf(batt_str, EC_MEMMAP_TEXT_MAX, "%04X", batt_serial);
/* Design Capacity of Full */
rv |= battery_design_capacity(
(int *)host_get_memmap(EC_MEMMAP_BATT_DCAP));
/* Design Voltage */
rv |= battery_design_voltage(
(int *)host_get_memmap(EC_MEMMAP_BATT_DVLT));
/* Last Full Charge Capacity (this is only mostly static) */
rv |= battery_full_charge_capacity(
(int *)host_get_memmap(EC_MEMMAP_BATT_LFCC));
/* Cycle Count */
rv |= battery_cycle_count((int *)host_get_memmap(EC_MEMMAP_BATT_CCNT));
/* Battery Manufacturer string */
batt_str = (char *)host_get_memmap(EC_MEMMAP_BATT_MFGR);
memset(batt_str, 0, EC_MEMMAP_TEXT_MAX);
rv |= battery_manufacturer_name(batt_str, EC_MEMMAP_TEXT_MAX);
/* Battery Model string */
batt_str = (char *)host_get_memmap(EC_MEMMAP_BATT_MODEL);
memset(batt_str, 0, EC_MEMMAP_TEXT_MAX);
rv |= battery_device_name(batt_str, EC_MEMMAP_TEXT_MAX);
/* Battery Type string */
batt_str = (char *)host_get_memmap(EC_MEMMAP_BATT_TYPE);
rv |= battery_device_chemistry(batt_str, EC_MEMMAP_TEXT_MAX);
/* Zero the dynamic entries. They'll come next. */
*(int *)host_get_memmap(EC_MEMMAP_BATT_VOLT) = 0;
*(int *)host_get_memmap(EC_MEMMAP_BATT_RATE) = 0;
*(int *)host_get_memmap(EC_MEMMAP_BATT_CAP) = 0;
*(int *)host_get_memmap(EC_MEMMAP_BATT_LFCC) = 0;
*host_get_memmap(EC_MEMMAP_BATT_FLAG) = 0;
if (rv)
problem(PR_STATIC_UPDATE, rv);
else
/* No errors seen. Battery data is now present */
*host_get_memmap(EC_MEMMAP_BATTERY_VERSION) = 1;
return rv;
}
static void update_dynamic_battery_info(void)
{
/* The memmap address is constant. We should fix these calls somehow. */
int *memmap_volt = (int *)host_get_memmap(EC_MEMMAP_BATT_VOLT);
int *memmap_rate = (int *)host_get_memmap(EC_MEMMAP_BATT_RATE);
int *memmap_cap = (int *)host_get_memmap(EC_MEMMAP_BATT_CAP);
int *memmap_lfcc = (int *)host_get_memmap(EC_MEMMAP_BATT_LFCC);
uint8_t *memmap_flags = host_get_memmap(EC_MEMMAP_BATT_FLAG);
uint8_t tmp;
int send_batt_status_event = 0;
int send_batt_info_event = 0;
static int __bss_slow batt_present;
tmp = 0;
if (curr.ac)
tmp |= EC_BATT_FLAG_AC_PRESENT;
if (curr.batt.is_present == BP_YES) {
tmp |= EC_BATT_FLAG_BATT_PRESENT;
batt_present = 1;
/* Tell the AP to read battery info if it is newly present. */
if (!(*memmap_flags & EC_BATT_FLAG_BATT_PRESENT))
send_batt_info_event++;
} else {
/*
* Require two consecutive updates with BP_NOT_SURE
* before reporting it gone to the host.
*/
if (batt_present)
tmp |= EC_BATT_FLAG_BATT_PRESENT;
else if (*memmap_flags & EC_BATT_FLAG_BATT_PRESENT)
send_batt_info_event++;
batt_present = 0;
}
if (!(curr.batt.flags & BATT_FLAG_BAD_VOLTAGE))
*memmap_volt = curr.batt.voltage;
if (!(curr.batt.flags & BATT_FLAG_BAD_CURRENT))
*memmap_rate = ABS(curr.batt.current);
if (!(curr.batt.flags & BATT_FLAG_BAD_REMAINING_CAPACITY)) {
/*
* If we're running off the battery, it must have some charge.
* Don't report zero charge, as that has special meaning
* to Chrome OS powerd.
*/
if (curr.batt.remaining_capacity == 0 && !curr.batt_is_charging)
*memmap_cap = 1;
else
*memmap_cap = curr.batt.remaining_capacity;
}
if (!(curr.batt.flags & BATT_FLAG_BAD_FULL_CAPACITY) &&
(curr.batt.full_capacity <= (*memmap_lfcc - LFCC_EVENT_THRESH) ||
curr.batt.full_capacity >= (*memmap_lfcc + LFCC_EVENT_THRESH))) {
*memmap_lfcc = curr.batt.full_capacity;
/* Poke the AP if the full_capacity changes. */
send_batt_info_event++;
}
if (curr.batt.is_present == BP_YES &&
!(curr.batt.flags & BATT_FLAG_BAD_STATE_OF_CHARGE) &&
curr.batt.state_of_charge <= BATTERY_LEVEL_CRITICAL)
tmp |= EC_BATT_FLAG_LEVEL_CRITICAL;
tmp |= curr.batt_is_charging ? EC_BATT_FLAG_CHARGING :
EC_BATT_FLAG_DISCHARGING;
/* Tell the AP to re-read battery status if charge state changes */
if (*memmap_flags != tmp)
send_batt_status_event++;
/* Update flags before sending host events. */
*memmap_flags = tmp;
if (send_batt_info_event)
host_set_single_event(EC_HOST_EVENT_BATTERY);
if (send_batt_status_event)
host_set_single_event(EC_HOST_EVENT_BATTERY_STATUS);
}
#elif defined(CONFIG_EC_EC_COMM_BATTERY_SLAVE)
/*
* TODO(b:65697620): Make this depend on a separate config option instead, so
* that, even on systems that would typically use memmap, we can decide to use
* these structures, and pass battery information via a host command instead.
*/
static int update_static_battery_info(void)
{
int batt_serial;
int val;
/*
* The return values have type enum ec_error_list, but EC_SUCCESS is
* zero. We'll just look for any failures so we can try them all again.
*/
int rv, ret;
/* Clear all static information. */
memset(&base_battery_static, 0, sizeof(base_battery_static));
/* Smart battery serial number is 16 bits */
rv = battery_serial_number(&batt_serial);
if (!rv)
snprintf(base_battery_static.serial,
sizeof(base_battery_static.serial),
"%04X", batt_serial);
/* Design Capacity of Full */
ret = battery_design_capacity(&val);
if (!ret)
base_battery_static.design_capacity = val;
rv |= ret;
/* Design Voltage */
ret = battery_design_voltage(&val);
if (!ret)
base_battery_static.design_voltage = val;
rv |= ret;
/* Cycle Count */
ret = battery_cycle_count(&val);
if (!ret)
base_battery_static.cycle_count = val;
rv |= ret;
/* Battery Manufacturer string */
rv |= battery_manufacturer_name(base_battery_static.manufacturer,
sizeof(base_battery_static.manufacturer));
/* Battery Model string */
rv |= battery_device_name(base_battery_static.model,
sizeof(base_battery_static.model));
/* Battery Type string */
rv |= battery_device_chemistry(base_battery_static.type,
sizeof(base_battery_static.type));
/* Zero the dynamic entries. They'll come next. */
memset(&base_battery_dynamic, 0, sizeof(base_battery_dynamic));
if (rv)
problem(PR_STATIC_UPDATE, rv);
else
; /*
* TODO(b:65697620): Do we need to set a flag to indicate that
* the information is now valid?
*/
return rv;
}
static void update_dynamic_battery_info(void)
{
static int __bss_slow batt_present;
uint8_t tmp;
tmp = 0;
if (curr.ac)
tmp |= EC_BATT_FLAG_AC_PRESENT;
if (curr.batt.is_present == BP_YES) {
tmp |= EC_BATT_FLAG_BATT_PRESENT;
batt_present = 1;
} else {
/*
* Require two consecutive updates with BP_NOT_SURE
* before reporting it gone to the host.
*/
if (batt_present)
tmp |= EC_BATT_FLAG_BATT_PRESENT;
batt_present = 0;
}
if (!(curr.batt.flags & BATT_FLAG_BAD_VOLTAGE))
base_battery_dynamic.actual_voltage = curr.batt.voltage;
if (!(curr.batt.flags & BATT_FLAG_BAD_CURRENT))
base_battery_dynamic.actual_current = curr.batt.current;
if (!(curr.batt.flags & BATT_FLAG_BAD_DESIRED_VOLTAGE))
base_battery_dynamic.desired_voltage =
curr.batt.desired_voltage;
if (!(curr.batt.flags & BATT_FLAG_BAD_DESIRED_CURRENT))
base_battery_dynamic.desired_current =
curr.batt.desired_current;
if (!(curr.batt.flags & BATT_FLAG_BAD_REMAINING_CAPACITY)) {
/*
* If we're running off the battery, it must have some charge.
* Don't report zero charge, as that has special meaning
* to Chrome OS powerd.
*/
if (curr.batt.remaining_capacity == 0 && !curr.batt_is_charging)
base_battery_dynamic.remaining_capacity = 1;
else
base_battery_dynamic.remaining_capacity =
curr.batt.remaining_capacity;
}
if (!(curr.batt.flags & BATT_FLAG_BAD_FULL_CAPACITY) &&
(curr.batt.full_capacity <=
(base_battery_dynamic.full_capacity - LFCC_EVENT_THRESH) ||
curr.batt.full_capacity >=
(base_battery_dynamic.full_capacity + LFCC_EVENT_THRESH))) {
base_battery_dynamic.full_capacity = curr.batt.full_capacity;
}
if (curr.batt.is_present == BP_YES &&
!(curr.batt.flags & BATT_FLAG_BAD_STATE_OF_CHARGE) &&
curr.batt.state_of_charge <= BATTERY_LEVEL_CRITICAL)
tmp |= EC_BATT_FLAG_LEVEL_CRITICAL;
tmp |= curr.batt_is_charging ? EC_BATT_FLAG_CHARGING :
EC_BATT_FLAG_DISCHARGING;
base_battery_dynamic.flags = tmp;
}
#endif
static const char * const state_list[] = {
"idle", "discharge", "charge", "precharge"
};
BUILD_ASSERT(ARRAY_SIZE(state_list) == NUM_STATES_V2);
static const char * const batt_pres[] = {
"NO", "YES", "NOT_SURE",
};
static void dump_charge_state(void)
{
#define DUMP(FLD, FMT) ccprintf(#FLD " = " FMT "\n", curr.FLD)
#define DUMP_CHG(FLD, FMT) ccprintf("\t" #FLD " = " FMT "\n", curr.chg. FLD)
#define DUMP_BATT(FLD, FMT) ccprintf("\t" #FLD " = " FMT "\n", curr.batt. FLD)
ccprintf("state = %s\n", state_list[curr.state]);
DUMP(ac, "%d");
DUMP(batt_is_charging, "%d");
ccprintf("chg.*:\n");
DUMP_CHG(voltage, "%dmV");
DUMP_CHG(current, "%dmA");
DUMP_CHG(input_current, "%dmA");
DUMP_CHG(status, "0x%x");
DUMP_CHG(option, "0x%x");
DUMP_CHG(flags, "0x%x");
cflush();
ccprintf("batt.*:\n");
ccprintf("\ttemperature = %dC\n",
DECI_KELVIN_TO_CELSIUS(curr.batt.temperature));
DUMP_BATT(state_of_charge, "%d%%");
DUMP_BATT(voltage, "%dmV");
DUMP_BATT(current, "%dmA");
DUMP_BATT(desired_voltage, "%dmV");
DUMP_BATT(desired_current, "%dmA");
DUMP_BATT(flags, "0x%x");
DUMP_BATT(remaining_capacity, "%dmAh");
DUMP_BATT(full_capacity, "%dmAh");
ccprintf("\tis_present = %s\n", batt_pres[curr.batt.is_present]);
cflush();
DUMP(requested_voltage, "%dmV");
DUMP(requested_current, "%dmA");
ccprintf("chg_ctl_mode = %d\n", chg_ctl_mode);
ccprintf("manual_mode = %d\n", manual_mode);
ccprintf("user_current_limit = %dmA\n", user_current_limit);
ccprintf("battery_seems_to_be_dead = %d\n", battery_seems_to_be_dead);
ccprintf("battery_seems_to_be_disconnected = %d\n",
battery_seems_to_be_disconnected);
ccprintf("battery_was_removed = %d\n", battery_was_removed);
ccprintf("debug output = %s\n", debugging ? "on" : "off");
#undef DUMP
}
static void show_charging_progress(void)
{
int rv = 0, minutes, to_full;
#ifdef CONFIG_BATTERY_SMART
/*
* Predicted remaining battery capacity based on AverageCurrent().
* 65535 = Battery is not being discharged.
*/
if (!battery_time_to_empty(&minutes) && minutes != 65535)
to_full = 0;
/*
* Predicted time-to-full charge based on AverageCurrent().
* 65535 = Battery is not being discharged.
*/
else if (!battery_time_to_full(&minutes) && minutes != 65535)
to_full = 1;
/*
* If both time to empty and time to full have invalid data, consider
* measured current from the coulomb counter and ac present status to
* decide whether battery is about to full or empty.
*/
else {
to_full = curr.batt_is_charging;
rv = EC_ERROR_UNKNOWN;
}
#else
if (!curr.batt_is_charging) {
rv = battery_time_to_empty(&minutes);
to_full = 0;
} else {
rv = battery_time_to_full(&minutes);
to_full = 1;
}
#endif
if (rv)
CPRINTS("Battery %d%% / ??h:?? %s%s",
curr.batt.state_of_charge,
to_full ? "to full" : "to empty",
is_full ? ", not accepting current" : "");
else
CPRINTS("Battery %d%% / %dh:%d %s%s",
curr.batt.state_of_charge,
minutes / 60, minutes % 60,
to_full ? "to full" : "to empty",
is_full ? ", not accepting current" : "");
if (debugging) {
ccprintf("battery:\n");
print_battery_debug();
ccprintf("charger:\n");
print_charger_debug();
ccprintf("chg:\n");
dump_charge_state();
}
}
/* Calculate if battery is full based on whether it is accepting charge */
static int calc_is_full(void)
{
static int __bss_slow ret;
/* If bad state of charge reading, return last value */
if (curr.batt.flags & BATT_FLAG_BAD_STATE_OF_CHARGE ||
curr.batt.state_of_charge > 100)
return ret;
/*
* Battery is full when SoC is above 90% and battery desired current
* is 0. This is necessary because some batteries stop charging when
* the SoC still reports <100%, so we need to check desired current
* to know if it is actually full.
*/
ret = (curr.batt.state_of_charge >= 90 &&
curr.batt.desired_current == 0);
return ret;
}
/*
* Ask the charger for some voltage and current. If either value is 0,
* charging is disabled; otherwise it's enabled. Negative values are ignored.
*/
static int charge_request(int voltage, int current)
{
int r1 = EC_SUCCESS, r2 = EC_SUCCESS, r3 = EC_SUCCESS;
static int __bss_slow prev_volt, prev_curr;
if (!voltage || !current) {
#ifdef CONFIG_CHARGER_NARROW_VDC
current = 0;
/* With NVDC charger, keep VSYS voltage higher than battery */
voltage = charger_closest_voltage(
curr.batt.voltage + charger_get_info()->voltage_step);
/* If the battery is full, request the max voltage. */
if (is_full)
voltage = battery_get_info()->voltage_max;
/* And handle dead battery case */
voltage = MAX(voltage, battery_get_info()->voltage_min);
#else
voltage = current = 0;
#endif
}
if (curr.ac) {
if (prev_volt != voltage || prev_curr != current)
CPRINTS("%s(%dmV, %dmA)", __func__, voltage, current);
}
/*
* Set current before voltage so that if we are just starting
* to charge, we allow some time (i2c delay) for charging circuit to
* start at a voltage just above battery voltage before jumping
* up. This helps avoid large current spikes when connecting
* battery.
*/
if (current >= 0)
r2 = charger_set_current(current);
if (r2 != EC_SUCCESS)
problem(PR_SET_CURRENT, r2);
if (voltage >= 0)
r1 = charger_set_voltage(voltage);
if (r1 != EC_SUCCESS)
problem(PR_SET_VOLTAGE, r1);
/*
* Set the charge inhibit bit when possible as it appears to save
* power in some cases (e.g. Nyan with BQ24735).
*/
if (voltage > 0 || current > 0)
r3 = charger_set_mode(0);
else
r3 = charger_set_mode(CHARGE_FLAG_INHIBIT_CHARGE);
if (r3 != EC_SUCCESS)
problem(PR_SET_MODE, r3);
/*
* Only update if the request worked, so we'll keep trying on failures.
*/
if (!r1 && !r2) {
prev_volt = voltage;
prev_curr = current;
}
return r1 ? r1 : r2;
}
/* Force charging off before the battery is full. */
static int set_chg_ctrl_mode(enum ec_charge_control_mode mode)
{
if (mode == CHARGE_CONTROL_NORMAL) {
chg_ctl_mode = mode;
manual_mode = 0;
} else {
/*
* Changing mode is only meaningful if external power is
* present. If it's not present we can't charge anyway.
*/
if (!curr.ac)
return EC_ERROR_NOT_POWERED;
chg_ctl_mode = mode;
charge_request(0, 0);
manual_mode = 1;
}
return EC_SUCCESS;
}
/* True if we know the battery temp is too high or too low */
static inline int battery_too_hot(int batt_temp_c)
{
return (!(curr.batt.flags & BATT_FLAG_BAD_TEMPERATURE) &&
(batt_temp_c > batt_info->discharging_max_c ||
batt_temp_c < batt_info->discharging_min_c));
}
/* True if we know the charge is too low, or we know the voltage is too low. */
static inline int battery_too_low(void)
{
return ((!(curr.batt.flags & BATT_FLAG_BAD_STATE_OF_CHARGE) &&
curr.batt.state_of_charge < BATTERY_LEVEL_SHUTDOWN) ||
(!(curr.batt.flags & BATT_FLAG_BAD_VOLTAGE) &&
curr.batt.voltage <= batt_info->voltage_min));
}
/*
* Send host event to the AP if the battery is temperature or charge level
* is critical. Force-shutdown if the problem isn't corrected after timeout.
*/
static int shutdown_on_critical_battery(void)
{
int batt_temp_c;
int battery_critical = 0;
/*
* TODO(crosbug.com/p/27642): The thermal loop should watch the battery
* temp, so it can turn fans on.
*/
batt_temp_c = DECI_KELVIN_TO_CELSIUS(curr.batt.temperature);
if (battery_too_hot(batt_temp_c)) {
CPRINTS("Batt temp out of range: %dC", batt_temp_c);
battery_critical = 1;
}
if (battery_too_low() && !curr.batt_is_charging) {
CPRINTS("Low battery: %d%%, %dmV",
curr.batt.state_of_charge, curr.batt.voltage);
battery_critical = 1;
}
if (!battery_critical) {
/* Reset shutdown warning time */
shutdown_warning_time.val = 0;
return battery_critical;
}
if (!shutdown_warning_time.val) {
CPRINTS("charge warn shutdown due to critical battery");
shutdown_warning_time = get_time();
#ifdef CONFIG_HOSTCMD_EVENTS
if (!chipset_in_state(CHIPSET_STATE_ANY_OFF))
host_set_single_event(EC_HOST_EVENT_BATTERY_SHUTDOWN);
#endif
} else if (get_time().val > shutdown_warning_time.val +
CRITICAL_BATTERY_SHUTDOWN_TIMEOUT_US) {
if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) {
/* Timeout waiting for charger to provide more power */
#if defined(CONFIG_BATTERY_CRITICAL_SHUTDOWN_CUT_OFF)
CPRINTS(
"charge force battery cut-off due to critical level");
board_cut_off_battery();
#elif defined(CONFIG_HIBERNATE)
CPRINTS(
"charge force EC hibernate due to critical battery");
system_hibernate(0, 0);
#endif
} else {
/* Timeout waiting for AP to shut down, so kill it */
CPRINTS(
"charge force shutdown due to critical battery");
chipset_force_shutdown();
}
}
return battery_critical;
}
/*
* Send host events as the battery charge drops below certain thresholds.
* We handle forced shutdown and other actions elsewhere; this is just for the
* host events. We send these even if the AP is off, since the AP will read and
* discard any events it doesn't care about the next time it wakes up.
*/
static void notify_host_of_low_battery(void)
{
/* We can't tell what the current charge is. Assume it's okay. */
if (curr.batt.flags & BATT_FLAG_BAD_STATE_OF_CHARGE)
return;
#ifdef CONFIG_HOSTCMD_EVENTS
if (curr.batt.state_of_charge <= BATTERY_LEVEL_LOW &&
prev_charge > BATTERY_LEVEL_LOW)
host_set_single_event(EC_HOST_EVENT_BATTERY_LOW);
if (curr.batt.state_of_charge <= BATTERY_LEVEL_CRITICAL &&
prev_charge > BATTERY_LEVEL_CRITICAL)
host_set_single_event(EC_HOST_EVENT_BATTERY_CRITICAL);
#endif
}
const struct batt_params *charger_current_battery_params(void)
{
return &curr.batt;
}
void charger_init(void)
{
/* Initialize current state */
memset(&curr, 0, sizeof(curr));
curr.batt.is_present = BP_NOT_SURE;
}
DECLARE_HOOK(HOOK_INIT, charger_init, HOOK_PRIO_DEFAULT);
static int get_desired_input_current(enum battery_present batt_present,
const struct charger_info * const info)
{
if (batt_present == BP_YES || system_is_locked()) {
#ifdef CONFIG_CHARGE_MANAGER
int ilim = charge_manager_get_charger_current();
return ilim == CHARGE_CURRENT_UNINITIALIZED ?
CHARGE_CURRENT_UNINITIALIZED :
MAX(CONFIG_CHARGER_INPUT_CURRENT, ilim);
#else
return CONFIG_CHARGER_INPUT_CURRENT;
#endif
} else {
#ifdef CONFIG_USB_POWER_DELIVERY
return MIN(PD_MAX_CURRENT_MA, info->input_current_max);
#else
return info->input_current_max;
#endif
}
}
/* Main loop */
void charger_task(void *u)
{
int sleep_usec;
int battery_critical;
int need_static = 1;
const struct charger_info * const info = charger_get_info();
/* Get the battery-specific values */
batt_info = battery_get_info();
prev_ac = prev_charge = -1;
chg_ctl_mode = CHARGE_CONTROL_NORMAL;
shutdown_warning_time.val = 0UL;
battery_seems_to_be_dead = 0;
/*
* If system is not locked and we don't have a battery to live on,
* then use max input current limit so that we can pull as much power
* as needed.
*/
battery_get_params(&curr.batt);
prev_bp = curr.batt.is_present;
curr.desired_input_current = get_desired_input_current(prev_bp, info);
while (1) {
/* Let's see what's going on... */
curr.ts = get_time();
sleep_usec = 0;
problems_exist = 0;
battery_critical = 0;
curr.ac = extpower_is_present();
if (curr.ac != prev_ac) {
if (curr.ac) {
/*
* Some chargers are unpowered when the AC is
* off, so we'll reinitialize it when AC
* comes back and set the input current limit.
* Try again if it fails.
*/
int rv = charger_post_init();
if (rv != EC_SUCCESS) {
problem(PR_POST_INIT, rv);
} else {
if (curr.desired_input_current !=
CHARGE_CURRENT_UNINITIALIZED)
rv = charger_set_input_current(
curr.desired_input_current);
if (rv != EC_SUCCESS)
problem(PR_SET_INPUT_CURR, rv);
else
prev_ac = curr.ac;
}
} else {
/* Some things are only meaningful on AC */
chg_ctl_mode = CHARGE_CONTROL_NORMAL;
battery_seems_to_be_dead = 0;
prev_ac = curr.ac;
}
}
charger_get_params(&curr.chg);
battery_get_params(&curr.batt);
if (prev_bp != curr.batt.is_present) {
prev_bp = curr.batt.is_present;
/* Update battery info due to change of battery */
batt_info = battery_get_info();
need_static = 1;
curr.desired_input_current =
get_desired_input_current(prev_bp, info);
if (curr.desired_input_current !=
CHARGE_CURRENT_UNINITIALIZED)
charger_set_input_current(
curr.desired_input_current);
hook_notify(HOOK_BATTERY_SOC_CHANGE);
}
/*
* TODO(crosbug.com/p/27527). Sometimes the battery thinks its
* temperature is 6280C, which seems a bit high. Let's ignore
* anything above the boiling point of tungsten until this bug
* is fixed. If the battery is really that warm, we probably
* have more urgent problems.
*/
if (curr.batt.temperature > CELSIUS_TO_DECI_KELVIN(5660)) {
CPRINTS("ignoring ridiculous batt.temp of %dC",
DECI_KELVIN_TO_CELSIUS(curr.batt.temperature));
curr.batt.flags |= BATT_FLAG_BAD_TEMPERATURE;
}
/* If the battery thinks it's above 100%, don't believe it */
if (curr.batt.state_of_charge > 100) {
CPRINTS("ignoring ridiculous batt.soc of %d%%",
curr.batt.state_of_charge);
curr.batt.flags |= BATT_FLAG_BAD_STATE_OF_CHARGE;
}
/*
* Now decide what we want to do about it. We'll normally just
* pass along whatever the battery wants to the charger. Note
* that if battery_get_params() can't get valid values from the
* battery it uses (0, 0), which is probably safer than blindly
* applying power to a battery we can't talk to.
*/
curr.requested_voltage = curr.batt.desired_voltage;
curr.requested_current = curr.batt.desired_current;
/* If we *know* there's no battery, wait for one to appear. */
if (curr.batt.is_present == BP_NO) {
if (!curr.ac)
CPRINTS("running with no battery and no AC");
curr.state = ST_IDLE;
curr.batt_is_charging = 0;
battery_was_removed = 1;
goto wait_for_it;
}
/*
* If we had trouble talking to the battery or the charger, we
* should probably do nothing for a bit, and if it doesn't get
* better then flag it as an error.
*/
if (curr.chg.flags & CHG_FLAG_BAD_ANY)
problem(PR_CHG_FLAGS, curr.chg.flags);
if (curr.batt.flags & BATT_FLAG_BAD_ANY)
problem(PR_BATT_FLAGS, curr.batt.flags);
/*
* If AC is present, check if input current is sufficient to
* actually charge battery.
*/
curr.batt_is_charging = curr.ac && (curr.batt.current >= 0);
/* Don't let the battery hurt itself. */
battery_critical = shutdown_on_critical_battery();
if (!curr.ac) {
curr.state = ST_DISCHARGE;
goto wait_for_it;
}
/* Okay, we're on AC and we should have a battery. */
/* Used for factory tests. */
if (chg_ctl_mode != CHARGE_CONTROL_NORMAL) {
curr.state = ST_IDLE;
goto wait_for_it;
}
/* If the battery is not responsive, try to wake it up. */
if (!(curr.batt.flags & BATT_FLAG_RESPONSIVE)) {
if (battery_seems_to_be_dead || battery_is_cut_off()) {
/* It's dead, do nothing */
curr.state = ST_IDLE;
curr.requested_voltage = 0;
curr.requested_current = 0;
} else if (curr.state == ST_PRECHARGE &&
(get_time().val > precharge_start_time.val +
PRECHARGE_TIMEOUT_US)) {
/* We've tried long enough, give up */
CPRINTS("battery seems to be dead");
battery_seems_to_be_dead = 1;
curr.state = ST_IDLE;
curr.requested_voltage = 0;
curr.requested_current = 0;
} else {
/* See if we can wake it up */
if (curr.state != ST_PRECHARGE) {
CPRINTS("try to wake battery");
precharge_start_time = get_time();
need_static = 1;
}
curr.state = ST_PRECHARGE;
curr.requested_voltage =
batt_info->voltage_max;
curr.requested_current =
batt_info->precharge_current;
}
goto wait_for_it;
} else {
/* The battery is responding. Yay. Try to use it. */
#ifdef CONFIG_BATTERY_REQUESTS_NIL_WHEN_DEAD
/*
* TODO (crosbug.com/p/29467): remove this workaround
* for dead battery that requests no voltage/current
*/
if (curr.requested_voltage == 0 &&
curr.requested_current == 0 &&
curr.batt.state_of_charge == 0) {
/* Battery is dead, give precharge current */
curr.requested_voltage =
batt_info->voltage_max;
curr.requested_current =
batt_info->precharge_current;
} else
#endif
#ifdef CONFIG_BATTERY_REVIVE_DISCONNECT
battery_seems_to_be_disconnected = 0;
if (curr.requested_voltage == 0 &&
curr.requested_current == 0 &&
battery_get_disconnect_state() ==
BATTERY_DISCONNECTED) {
/*
* Battery is in disconnect state. Apply a
* current to kick it out of this state.
*/
CPRINTS("found battery in disconnect state");
curr.requested_voltage =
batt_info->voltage_max;
curr.requested_current =
batt_info->precharge_current;
battery_seems_to_be_disconnected = 1;
} else
#endif
if (curr.state == ST_PRECHARGE ||
battery_seems_to_be_dead ||
battery_was_removed) {
CPRINTS("battery woke up");
/* Update the battery-specific values */
batt_info = battery_get_info();
need_static = 1;
}
battery_seems_to_be_dead = battery_was_removed = 0;
curr.state = ST_CHARGE;
}
wait_for_it:
#ifdef CONFIG_CHARGER_PROFILE_OVERRIDE
if (chg_ctl_mode == CHARGE_CONTROL_NORMAL) {
sleep_usec = charger_profile_override(&curr);
if (sleep_usec < 0)
problem(PR_CUSTOM, sleep_usec);
}
#endif
#ifdef CONFIG_CHARGE_MANAGER
if (curr.batt.state_of_charge >=
CONFIG_CHARGE_MANAGER_BAT_PCT_SAFE_MODE_EXIT &&
!battery_seems_to_be_disconnected)
charge_manager_leave_safe_mode();
#endif
/* Keep the AP informed */
if (need_static)
need_static = update_static_battery_info();
/* Wait on the dynamic info until the static info is good. */
if (!need_static)
update_dynamic_battery_info();
notify_host_of_low_battery();
/* And the EC console */
is_full = calc_is_full();
if ((!(curr.batt.flags & BATT_FLAG_BAD_STATE_OF_CHARGE) &&
curr.batt.state_of_charge != prev_charge) ||
(is_full != prev_full)) {
show_charging_progress();
prev_charge = curr.batt.state_of_charge;
hook_notify(HOOK_BATTERY_SOC_CHANGE);
}
prev_full = is_full;
#ifndef CONFIG_CHARGER_MAINTAIN_VBAT
/* Turn charger off if it's not needed */
if (curr.state == ST_IDLE || curr.state == ST_DISCHARGE) {
curr.requested_voltage = 0;
curr.requested_current = 0;
}
#endif
/* Apply external limits */
if (curr.requested_current > user_current_limit)
curr.requested_current = user_current_limit;
/* Round to valid values */
curr.requested_voltage =
charger_closest_voltage(curr.requested_voltage);
curr.requested_current =
charger_closest_current(curr.requested_current);
/* Charger only accpets request when AC is on. */
if (curr.ac) {
/*
* Some batteries would wake up after cut-off if we keep
* charging it. Thus, we only charge when AC is on and
* battery is not cut off yet.
*/
if (battery_is_cut_off()) {
curr.requested_voltage = 0;
curr.requested_current = 0;
}
/*
* As a safety feature, some chargers will stop
* charging if we don't communicate with it frequently
* enough. In manual mode, we'll just tell it what it
* knows.
*/
else if (manual_mode) {
curr.requested_voltage = curr.chg.voltage;
curr.requested_current = curr.chg.current;
}
} else {
#ifndef CONFIG_CHARGER_MAINTAIN_VBAT
curr.requested_voltage = charger_closest_voltage(
curr.batt.voltage + info->voltage_step);
curr.requested_current = -1;
#endif
#ifdef CONFIG_EC_EC_COMM_BATTERY_SLAVE
/*
* On EC-EC slave, do not charge if curr.ac is 0: there
* might still be some external power available but we
* do not want to use it for charging.
*/
curr.requested_current = 0;
#endif
}
charge_request(curr.requested_voltage, curr.requested_current);
/* How long to sleep? */
if (problems_exist)
/* If there are errors, don't wait very long. */
sleep_usec = CHARGE_POLL_PERIOD_SHORT;
else if (sleep_usec <= 0) {
/* default values depend on the state */
if (!curr.ac &&
(curr.state == ST_IDLE ||
curr.state == ST_DISCHARGE)) {
/* If AP is off, we can sleep a long time */
if (chipset_in_state(CHIPSET_STATE_ANY_OFF |
CHIPSET_STATE_ANY_SUSPEND))
sleep_usec =
CHARGE_POLL_PERIOD_VERY_LONG;
else
/* Discharging, not too urgent */
sleep_usec = CHARGE_POLL_PERIOD_LONG;
} else {
/* AC present, so pay closer attention */
sleep_usec = CHARGE_POLL_PERIOD_CHARGE;
}
}
/* Adjust for time spent in this loop */
sleep_usec -= (int)(get_time().val - curr.ts.val);
if (sleep_usec < CHARGE_MIN_SLEEP_USEC)
sleep_usec = CHARGE_MIN_SLEEP_USEC;
else if (sleep_usec > CHARGE_MAX_SLEEP_USEC)
sleep_usec = CHARGE_MAX_SLEEP_USEC;
/*
* If battery is critical, ensure that the sleep time is not
* very long since we might want to hibernate or cut-off
* battery sooner.
*/
if (battery_critical &&
(sleep_usec > CRITICAL_BATTERY_SHUTDOWN_TIMEOUT_US))
sleep_usec = CRITICAL_BATTERY_SHUTDOWN_TIMEOUT_US;
task_wait_event(sleep_usec);
}
}
/*****************************************************************************/
/* Exported functions */
int charge_want_shutdown(void)
{
return (curr.state == ST_DISCHARGE) &&
!(curr.batt.flags & BATT_FLAG_BAD_STATE_OF_CHARGE) &&
(curr.batt.state_of_charge < BATTERY_LEVEL_SHUTDOWN);
}
int charge_prevent_power_on(int power_button_pressed)
{
int prevent_power_on = 0;
#ifdef CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON
struct batt_params params;
struct batt_params *current_batt_params = &curr.batt;
static int automatic_power_on = 1;
/*
* Remember that a power button was pressed, and assume subsequent
* power-ups are user-requested and non-automatic.
*/
if (power_button_pressed)
automatic_power_on = 0;
/* If battery params seem uninitialized then retrieve them */
if (current_batt_params->is_present == BP_NOT_SURE) {
battery_get_params(¶ms);
current_batt_params = ¶ms;
}
/* Require a minimum battery level to power on */
if (current_batt_params->is_present != BP_YES ||
current_batt_params->state_of_charge <
CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON)
prevent_power_on = 1;
#ifdef CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT
/*
* Allow power-on if our charger advertises more than
* LIKELY_PD_USBC_POWER_MW since it may speak PD and provide
* sufficient power once we enable PD communication.
*/
if (prevent_power_on)
if (charge_manager_get_power_limit_uw() >=
MIN(LIKELY_PD_USBC_POWER_MW * 1000,
CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW * 1000))
prevent_power_on = 0;
#endif
/*
* Factory override: Always allow power on if WP is disabled,
* except when auto-power-on at EC startup and the battery
* is physically present.
*/
prevent_power_on &= (system_is_locked() || (automatic_power_on
#ifdef CONFIG_BATTERY_HW_PRESENT_CUSTOM
&& battery_hw_present() == BP_YES
#endif
));
#endif
#ifdef CONFIG_CHARGE_MANAGER
/* Always prevent power on until charge current is initialized */
if (extpower_is_present() &&
(charge_manager_get_charger_current() ==
CHARGE_CURRENT_UNINITIALIZED))
prevent_power_on = 1;
#ifdef CONFIG_BATTERY_HW_PRESENT_CUSTOM
/*
* If battery is NOT physically present then prevent power on until
* charge manager provides at least LIKELY_PD_USBC_POWER_MW.
*/
if (extpower_is_present() && battery_hw_present() == BP_NO &&
charge_manager_get_power_limit_uw() <
#ifdef CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT
MIN(LIKELY_PD_USBC_POWER_MW * 1000,
CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW * 1000))
#else
(LIKELY_PD_USBC_POWER_MW * 1000))
#endif
prevent_power_on = 1;
#endif
#endif
return prevent_power_on;
}
enum charge_state charge_get_state(void)
{
switch (curr.state) {
case ST_IDLE:
if (battery_seems_to_be_dead || battery_was_removed)
return PWR_STATE_ERROR;
return PWR_STATE_IDLE;
case ST_DISCHARGE:
#ifdef CONFIG_PWR_STATE_DISCHARGE_FULL
if (curr.batt.state_of_charge >= BATTERY_LEVEL_NEAR_FULL)
return PWR_STATE_DISCHARGE_FULL;
else
#endif
return PWR_STATE_DISCHARGE;
case ST_CHARGE:
/* The only difference here is what the LEDs display. */
if (curr.batt.state_of_charge >= BATTERY_LEVEL_NEAR_FULL)
return PWR_STATE_CHARGE_NEAR_FULL;
else
return PWR_STATE_CHARGE;
default:
/* Anything else can be considered an error for LED purposes */
return PWR_STATE_ERROR;
}
}
uint32_t charge_get_flags(void)
{
uint32_t flags = 0;
if (chg_ctl_mode != CHARGE_CONTROL_NORMAL)
flags |= CHARGE_FLAG_FORCE_IDLE;
if (curr.ac)
flags |= CHARGE_FLAG_EXTERNAL_POWER;
if (curr.batt.flags & BATT_FLAG_RESPONSIVE)
flags |= CHARGE_FLAG_BATT_RESPONSIVE;
return flags;
}
int charge_get_percent(void)
{
/*
* Since there's no way to indicate an error to the caller, we'll just
* return the last known value. Even if we've never been able to talk
* to the battery, that'll be zero, which is probably as good as
* anything.
*/
return is_full ? 100 : curr.batt.state_of_charge;
}
int charge_get_battery_temp(int idx, int *temp_ptr)
{
if (curr.batt.flags & BATT_FLAG_BAD_TEMPERATURE)
return EC_ERROR_UNKNOWN;
/* Battery temp is 10ths of degrees K, temp wants degrees K */
*temp_ptr = curr.batt.temperature / 10;
return EC_SUCCESS;
}
int charge_is_consuming_full_input_current(void)
{
int chg_pct = charge_get_percent();
return chg_pct > 2 && chg_pct < 95;
}
int charge_set_input_current_limit(int ma, int mv)
{
/*
* If battery is not present and we are not locked, then allow system
* to pull as much input current as needed. Yes, we might overcurrent
* the charger but this is no worse then browning out due to
* insufficient input current.
*/
if (curr.batt.is_present != BP_YES && !system_is_locked()) {
#ifdef CONFIG_USB_POWER_DELIVERY
#if ((PD_MAX_POWER_MW * 1000) / PD_MAX_VOLTAGE_MV != PD_MAX_CURRENT_MA)
/*
* If battery is not present, input current is set to
* PD_MAX_CURRENT_MA. If the input power set is greater than
* the maximum allowed system power, system might get damaged.
* Hence, limit the input current to meet maximum allowed
* input system power.
*/
if (mv > 0 && mv * curr.desired_input_current >
PD_MAX_POWER_MW * 1000)
ma = (PD_MAX_POWER_MW * 1000) / mv;
else
return EC_SUCCESS;
#else
return EC_SUCCESS;
#endif
#endif /* CONFIG_USB_POWER_DELIVERY */
}
#ifdef CONFIG_CHARGER_MAX_INPUT_CURRENT
/* Limit input current limit to max limit for this board */
ma = MIN(ma, CONFIG_CHARGER_MAX_INPUT_CURRENT);
#endif
curr.desired_input_current = ma;
return charger_set_input_current(ma);
}
/*****************************************************************************/
/* Hooks */
/* Wake up the task when something important happens */
static void charge_wakeup(void)
{
task_wake(TASK_ID_CHARGER);
}
DECLARE_HOOK(HOOK_CHIPSET_RESUME, charge_wakeup, HOOK_PRIO_DEFAULT);
DECLARE_HOOK(HOOK_AC_CHANGE, charge_wakeup, HOOK_PRIO_DEFAULT);
/*****************************************************************************/
/* Host commands */
static int charge_command_charge_control(struct host_cmd_handler_args *args)
{
const struct ec_params_charge_control *p = args->params;
int rv;
rv = set_chg_ctrl_mode(p->mode);
if (rv != EC_SUCCESS)
return EC_RES_ERROR;
#ifdef CONFIG_CHARGER_DISCHARGE_ON_AC
#ifdef CONFIG_CHARGER_DISCHARGE_ON_AC_CUSTOM
rv = board_discharge_on_ac(p->mode == CHARGE_CONTROL_DISCHARGE);
#else
rv = charger_discharge_on_ac(p->mode == CHARGE_CONTROL_DISCHARGE);
#endif
if (rv != EC_SUCCESS)
return EC_RES_ERROR;
#endif
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_CHARGE_CONTROL, charge_command_charge_control,
EC_VER_MASK(1));
static void reset_current_limit(void)
{
user_current_limit = -1U;
}
DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, reset_current_limit, HOOK_PRIO_DEFAULT);
DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, reset_current_limit, HOOK_PRIO_DEFAULT);
static int charge_command_current_limit(struct host_cmd_handler_args *args)
{
const struct ec_params_current_limit *p = args->params;
user_current_limit = p->limit;
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_CHARGE_CURRENT_LIMIT, charge_command_current_limit,
EC_VER_MASK(0));
static int charge_command_charge_state(struct host_cmd_handler_args *args)
{
const struct ec_params_charge_state *in = args->params;
struct ec_response_charge_state *out = args->response;
uint32_t val;
int rv = EC_RES_SUCCESS;
switch (in->cmd) {
case CHARGE_STATE_CMD_GET_STATE:
out->get_state.ac = curr.ac;
out->get_state.chg_voltage = curr.chg.voltage;
out->get_state.chg_current = curr.chg.current;
out->get_state.chg_input_current = curr.chg.input_current;
out->get_state.batt_state_of_charge = curr.batt.state_of_charge;
args->response_size = sizeof(out->get_state);
break;
case CHARGE_STATE_CMD_GET_PARAM:
val = 0;
#ifdef CONFIG_CHARGER_PROFILE_OVERRIDE
/* custom profile params */
if (in->get_param.param >= CS_PARAM_CUSTOM_PROFILE_MIN &&
in->get_param.param <= CS_PARAM_CUSTOM_PROFILE_MAX) {
rv = charger_profile_override_get_param(
in->get_param.param, &val);
} else
#endif
#ifdef CONFIG_CHARGE_STATE_DEBUG
/* debug params */
if (in->get_param.param >= CS_PARAM_DEBUG_MIN &&
in->get_param.param <= CS_PARAM_DEBUG_MAX) {
rv = charge_get_charge_state_debug(
in->get_param.param, &val);
} else
#endif
/* standard params */
switch (in->get_param.param) {
case CS_PARAM_CHG_VOLTAGE:
val = curr.chg.voltage;
break;
case CS_PARAM_CHG_CURRENT:
val = curr.chg.current;
break;
case CS_PARAM_CHG_INPUT_CURRENT:
val = curr.chg.input_current;
break;
case CS_PARAM_CHG_STATUS:
val = curr.chg.status;
break;
case CS_PARAM_CHG_OPTION:
val = curr.chg.option;
break;
case CS_PARAM_LIMIT_POWER:
#ifdef CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT
/*
* LIMIT_POWER status is based on battery level
* and external charger power.
*/
if ((curr.batt.is_present != BP_YES ||
curr.batt.state_of_charge <
CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT)
&& charge_manager_get_power_limit_uw() <
CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW
* 1000 && system_is_locked())
val = 1;
else
#endif
val = 0;
break;
default:
rv = EC_RES_INVALID_PARAM;
}
/* got something */
out->get_param.value = val;
args->response_size = sizeof(out->get_param);
break;
case CHARGE_STATE_CMD_SET_PARAM:
if (system_is_locked())
return EC_RES_ACCESS_DENIED;
val = in->set_param.value;
#ifdef CONFIG_CHARGER_PROFILE_OVERRIDE
/* custom profile params */
if (in->set_param.param >= CS_PARAM_CUSTOM_PROFILE_MIN &&
in->set_param.param <= CS_PARAM_CUSTOM_PROFILE_MAX) {
rv = charger_profile_override_set_param(
in->set_param.param, val);
} else
#endif
switch (in->set_param.param) {
case CS_PARAM_CHG_VOLTAGE:
val = charger_closest_voltage(val);
if (charge_request(val, -1))
rv = EC_RES_ERROR;
manual_mode = 1;
break;
case CS_PARAM_CHG_CURRENT:
val = charger_closest_current(val);
if (charge_request(-1, val))
rv = EC_RES_ERROR;
manual_mode = 1;
break;
case CS_PARAM_CHG_INPUT_CURRENT:
if (charger_set_input_current(val))
rv = EC_RES_ERROR;
break;
case CS_PARAM_CHG_STATUS:
case CS_PARAM_LIMIT_POWER:
/* Can't set this */
rv = EC_RES_ACCESS_DENIED;
break;
case CS_PARAM_CHG_OPTION:
if (charger_set_option(val))
rv = EC_RES_ERROR;
break;
default:
rv = EC_RES_INVALID_PARAM;
}
break;
default:
CPRINTS("EC_CMD_CHARGE_STATE: bad cmd 0x%x", in->cmd);
rv = EC_RES_INVALID_PARAM;
}
return rv;
}
DECLARE_HOST_COMMAND(EC_CMD_CHARGE_STATE, charge_command_charge_state,
EC_VER_MASK(0));
/*****************************************************************************/
/* Console commands */
static int command_chgstate(int argc, char **argv)
{
int rv;
int val;
if (argc > 1) {
if (!strcasecmp(argv[1], "idle")) {
if (argc <= 2)
return EC_ERROR_PARAM_COUNT;
if (!parse_bool(argv[2], &val))
return EC_ERROR_PARAM2;
rv = set_chg_ctrl_mode(val ? CHARGE_CONTROL_IDLE :
CHARGE_CONTROL_NORMAL);
if (rv)
return rv;
#ifdef CONFIG_CHARGER_DISCHARGE_ON_AC
} else if (!strcasecmp(argv[1], "discharge")) {
if (argc <= 2)
return EC_ERROR_PARAM_COUNT;
if (!parse_bool(argv[2], &val))
return EC_ERROR_PARAM2;
rv = set_chg_ctrl_mode(val ? CHARGE_CONTROL_DISCHARGE :
CHARGE_CONTROL_NORMAL);
if (rv)
return rv;
#ifdef CONFIG_CHARGER_DISCHARGE_ON_AC_CUSTOM
rv = board_discharge_on_ac(val);
#else
rv = charger_discharge_on_ac(val);
#endif /* CONFIG_CHARGER_DISCHARGE_ON_AC_CUSTOM */
if (rv)
return rv;
#endif /* CONFIG_CHARGER_DISCHARGE_ON_AC */
} else if (!strcasecmp(argv[1], "debug")) {
if (argc <= 2)
return EC_ERROR_PARAM_COUNT;
if (!parse_bool(argv[2], &debugging))
return EC_ERROR_PARAM2;
} else {
return EC_ERROR_PARAM1;
}
}
dump_charge_state();
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(chgstate, command_chgstate,
"[idle|discharge|debug on|off]",
"Get/set charge state machine status");
#ifdef CONFIG_CHARGE_STATE_DEBUG
int charge_get_charge_state_debug(int param, uint32_t *value)
{
switch (param) {
case CS_PARAM_DEBUG_CTL_MODE:
*value = chg_ctl_mode;
break;
case CS_PARAM_DEBUG_MANUAL_MODE:
*value = manual_mode;
break;
case CS_PARAM_DEBUG_SEEMS_DEAD:
*value = battery_seems_to_be_dead;
break;
case CS_PARAM_DEBUG_SEEMS_DISCONNECTED:
*value = battery_seems_to_be_disconnected;
break;
case CS_PARAM_DEBUG_BATT_REMOVED:
*value = battery_was_removed;
break;
default:
*value = 0;
return EC_ERROR_INVAL;
}
return EC_SUCCESS;
}
#endif
|