1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
/* Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Power LED control for Chrome EC */
#include "console.h"
#include "onewire.h"
#include "power_led.h"
#include "timer.h"
#include "uart.h"
#include "util.h"
#define POWERLED_RETRIES 10
static const uint8_t led_masks[POWERLED_COLOR_COUNT] = {0xff, 0xfe, 0xfc, 0xfd};
static const char * const color_names[POWERLED_COLOR_COUNT] = {
"off", "red", "yellow", "green"};
/* Set the power LED GPIO controller outputs to the specified mask. */
static int powerled_set_mask(int mask)
{
int rv;
/* Reset the 1-wire bus */
rv = onewire_reset();
if (rv)
return rv;
/* Skip ROM, since only one device */
onewire_write(0xcc);
/* Write and turn on the LEDs */
onewire_write(0x5a);
onewire_write(mask);
onewire_write(~mask); /* Repeat inverted */
rv = onewire_read(); /* Confirmation byte */
if (rv != 0xaa)
return EC_ERROR_UNKNOWN;
/* The next byte is a read-back of the chip status. Since we're only
* using lines as outputs, we can ignore it. */
return EC_SUCCESS;
}
int powerled_set(enum powerled_color color)
{
int rv = EC_SUCCESS;
int i;
/* 1-wire communication can fail for timing reasons in the current
* system. We have a limited timing window to send/receive bits, but
* we can't disable interrupts for the rest of the system to guarantee
* we hit that window. Instead, simply retry the low-level command a
* few times. */
for (i = 0; i < POWERLED_RETRIES; i++) {
rv = powerled_set_mask(led_masks[color]);
if (rv == EC_SUCCESS)
break;
/* Sleep for a bit between tries. This gives the 1-wire GPIO
* chip time to recover from the failed attempt, and allows
* lower-priority tasks a chance to run. */
usleep(100);
}
return rv;
}
/*****************************************************************************/
/* Console commands */
static int command_powerled(int argc, char **argv)
{
int i = POWERLED_COLOR_COUNT;
/* Pick a color, any color... */
if (argc >= 1) {
for (i = 0; i < POWERLED_COLOR_COUNT; i++) {
if (!strcasecmp(argv[1], color_names[i]))
break;
}
}
if (i >= POWERLED_COLOR_COUNT) {
uart_puts("Please specify a color:");
for (i = 0; i < POWERLED_COLOR_COUNT; i++)
uart_printf(" %s", color_names[i]);
uart_puts("\n");
return EC_ERROR_INVAL;
}
uart_printf("Setting power LED to %s...\n", color_names[i]);
return powerled_set(i);
}
DECLARE_CONSOLE_COMMAND(powerled, command_powerled);
|
