path: root/core/cortex-m/mpu.c

/* Copyright 2013 The ChromiumOS Authors
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* MPU module for Chrome EC */

#include "builtin/assert.h"
#include "mpu.h"
#include "console.h"
#include "cpu.h"
#include "registers.h"
#include "task.h"
#include "util.h"

/**
 * @return Number of regions supported by the MPU. 0 means the processor does
 * not implement an MPU.
 */
int mpu_num_regions(void)
{
	return MPU_TYPE_REG_COUNT(mpu_get_type());
}

/**
 * @return true if processor has MPU, false otherwise
 */
bool has_mpu(void)
{
	return mpu_num_regions() != 0;
}

/**
 * @return true if MPU has unified instruction and data maps, false otherwise
 */
bool mpu_is_unified(void)
{
	return (mpu_get_type() & MPU_TYPE_UNIFIED_MASK) == 0;
}

/**
 * Update a memory region.
 *
 * region: index of the region to update
 * addr: base address of the region
 * size_bit: size of the region in power of two.
 * attr: attribute bits. Current value will be overwritten if enable is true.
 * enable: enables the region if non zero. Otherwise, disables the region.
 * srd: subregion mask to partition region into 1/8ths, 0 = subregion enabled.
 *
 * Based on 3.1.4.1 'Updating an MPU Region' of Stellaris LM4F232H5QC Datasheet
 */
int mpu_update_region(uint8_t region, uint32_t addr, uint8_t size_bit,
		      uint16_t attr, uint8_t enable, uint8_t srd)
{
	/*
	 * Note that on the Cortex-M3, Cortex-M4, and Cortex-M7, the base
	 * address used for an MPU region must be aligned to the size of the
	 * region:
	 *
	 * https://developer.arm.com/docs/dui0553/a/cortex-m4-peripherals/optional-memory-protection-unit/mpu-region-base-address-register
	 * https://developer.arm.com/docs/dui0552/a/cortex-m3-peripherals/optional-memory-protection-unit/mpu-region-base-address-register
	 * https://developer.arm.com/docs/dui0646/a/cortex-m7-peripherals/optional-memory-protection-unit/mpu-region-base-address-register#BABDAHJG
	 */
	if (!is_aligned(addr, BIT(size_bit)))
		return -EC_ERROR_INVAL;

	if (region >= mpu_num_regions())
		return -EC_ERROR_INVAL;

	if (size_bit < MPU_SIZE_BITS_MIN)
		return -EC_ERROR_INVAL;

	asm volatile("isb; dsb;");

	MPU_NUMBER = region;
	MPU_SIZE &= ~1; /* Disable */
	if (enable) {
		MPU_BASE = addr;
		/*
		 * MPU_ATTR = attr;
		 * MPU_SIZE = (srd << 8) | ((size_bit - 1) << 1) | 1;
		 *
		 * WORKAROUND: the 2 half-word accesses above should work
		 * according to the doc, but they don't ..., do a single 32-bit
		 * one.
		 */
		REG32(&MPU_SIZE) = ((uint32_t)attr << 16) | (srd << 8) |
				   ((size_bit - 1) << 1) | 1;
	}

	asm volatile("isb; dsb;");

	return EC_SUCCESS;
}

/*
 * Greedily configure the largest possible part of the given region from the
 * base address.
 *
 * Returns EC_SUCCESS on success and sets *consumed to the number of bytes
 * mapped from the base address. In case of error, the value of *consumed is
 * unpredictable.
 *
 * For instance, if addr is 0x10070000 and size is 0x30000 then memory in the
 * range 0x10070000-0x10080000 will be configured and *consumed will be set to
 * 0x10000.
 */
static int mpu_config_region_greedy(uint8_t region, uint32_t addr,
				    uint32_t size, uint16_t attr,
				    uint8_t enable, uint32_t *consumed)
{
	/*
	 * Compute candidate alignment to be used for the MPU region.
	 *
	 * This is the minimum of the base address and size alignment, since
	 * regions must be naturally aligned to their size.
	 */
	uint8_t natural_alignment = MIN(addr == 0 ? 32 : alignment_log2(addr),
					alignment_log2(size));
	uint8_t subregion_disable = 0;

	if (natural_alignment >= 5) {
		int sr_idx;
		uint32_t subregion_base, subregion_size;
		/*
		 * For MPU regions larger than 256 bytes we can use subregions,
		 * (which are a minimum of 32 bytes in size) making the actual
		 * MPU region 8x larger. Depending on the address alignment this
		 * can allow us to cover a larger area (and never a smaller
		 * one).
		 */
		natural_alignment += 3;
		/* Region size cannot exceed 4GB. */
		if (natural_alignment > 32)
			natural_alignment = 32;

		/*
		 * Generate the subregion mask by walking through each,
		 * disabling if it is not completely contained in the requested
		 * range.
		 */
		subregion_base = addr & ~((1 << natural_alignment) - 1);
		subregion_size = 1 << (natural_alignment - 3);
		*consumed = 0;
		for (sr_idx = 0; sr_idx < 8; sr_idx++) {
			if (subregion_base < addr ||
			    (subregion_base + subregion_size) > (addr + size))
				/* lsb of subregion mask is lowest address */
				subregion_disable |= 1 << sr_idx;
			else
				/* not disabled means consumed */
				*consumed += subregion_size;

			subregion_base += subregion_size;
		}
	} else {
		/* Not using subregions; all enabled */
		*consumed = 1 << natural_alignment;
	}

	return mpu_update_region(region, addr & ~((1 << natural_alignment) - 1),
				 natural_alignment, attr, enable,
				 subregion_disable);
}

/**
 * Configure a region
 *
 * region: index of the region to update
 * addr: Base address of the region
 * size: Size of the region in bytes
 * attr: Attribute bits. Current value will be overwritten if enable is set.
 * enable: Enables the region if non zero. Otherwise, disables the region.
 *
 * Returns EC_SUCCESS on success, -EC_ERROR_OVERFLOW if it is not possible to
 * fully configure the given region, or -EC_ERROR_INVAL if a parameter is
 * invalid (such as the address or size having unsupported alignment).
 */
int mpu_config_region(uint8_t region, uint32_t addr, uint32_t size,
		      uint16_t attr, uint8_t enable)
{
	int rv;
	uint32_t consumed;

	/* Zero size doesn't require configuration */
	if (size == 0)
		return EC_SUCCESS;

	rv = mpu_config_region_greedy(region, addr, size, attr, enable,
				      &consumed);
	if (rv != EC_SUCCESS)
		return rv;
	ASSERT(consumed <= size);
	addr += consumed;
	size -= consumed;

	/* Regions other than DATA_RAM_TEXT may use two MPU regions */
	if (size > 0 && region != REGION_DATA_RAM_TEXT) {
		rv = mpu_config_region_greedy(region + 1, addr, size, attr,
					      enable, &consumed);
		if (rv != EC_SUCCESS)
			return rv;
		ASSERT(consumed <= size);
		addr += consumed;
		size -= consumed;
	}

	if (size > 0)
		return EC_ERROR_OVERFLOW;
	return EC_SUCCESS;
}

/**
 * Set a region executable and read-write.
 *
 * region: index of the region
 * addr: base address of the region
 * size: size of the region in bytes
 * texscb: TEX and SCB bit field
 */
static int mpu_unlock_region(uint8_t region, uint32_t addr, uint32_t size,
			     uint8_t texscb)
{
	return mpu_config_region(region, addr, size, MPU_ATTR_RW_RW | texscb,
				 1);
}

void mpu_enable(void)
{
	MPU_CTRL |= MPU_CTRL_PRIVDEFEN | MPU_CTRL_HFNMIENA | MPU_CTRL_ENABLE;
}

void mpu_disable(void)
{
	MPU_CTRL &= ~(MPU_CTRL_PRIVDEFEN | MPU_CTRL_HFNMIENA | MPU_CTRL_ENABLE);
}

uint32_t mpu_get_type(void)
{
	return MPU_TYPE;
}

int mpu_protect_data_ram(void)
{
	int ret;

	/* Prevent code execution from data RAM */
	ret = mpu_config_region(
		REGION_DATA_RAM, CONFIG_RAM_BASE, CONFIG_DATA_RAM_SIZE,
		MPU_ATTR_XN | MPU_ATTR_RW_RW | MPU_ATTR_INTERNAL_SRAM, 1);
	if (ret != EC_SUCCESS)
		return ret;

	/* Exempt the __iram_text section */
	return mpu_unlock_region(
		REGION_DATA_RAM_TEXT, (uint32_t)&__iram_text_start,
		(uint32_t)(&__iram_text_end - &__iram_text_start),
		MPU_ATTR_INTERNAL_SRAM);
}

#if defined(CONFIG_EXTERNAL_STORAGE) || !defined(CONFIG_FLASH_PHYSICAL)
int mpu_protect_code_ram(void)
{
	/* Prevent write access to code RAM */
	return mpu_config_region(REGION_STORAGE,
				 CONFIG_PROGRAM_MEMORY_BASE + CONFIG_RO_MEM_OFF,
				 CONFIG_CODE_RAM_SIZE,
				 MPU_ATTR_RO_NO | MPU_ATTR_INTERNAL_SRAM, 1);
}
#else
int mpu_lock_ro_flash(void)
{
	/* Prevent execution from internal mapped RO flash */
	return mpu_config_region(
		REGION_STORAGE, CONFIG_MAPPED_STORAGE_BASE + CONFIG_RO_MEM_OFF,
		CONFIG_RO_SIZE,
		MPU_ATTR_XN | MPU_ATTR_RW_RW | MPU_ATTR_FLASH_MEMORY, 1);
}

/* Represent RW with at most 2 MPU regions. */
struct mpu_rw_regions mpu_get_rw_regions(void)
{
	int aligned_size_bit;
	struct mpu_rw_regions regions = {};

	regions.addr[0] = CONFIG_MAPPED_STORAGE_BASE + CONFIG_RW_MEM_OFF;

	/*
	 * Least significant set bit of the address determines the max size of
	 * the region because on the Cortex-M3, Cortex-M4 and Cortex-M7, the
	 * address used for an MPU region must be aligned to the size.
	 */
	aligned_size_bit = __fls(regions.addr[0] & -regions.addr[0]);
	regions.size[0] = MIN(BIT(aligned_size_bit), CONFIG_RW_SIZE);
	regions.addr[1] = regions.addr[0] + regions.size[0];
	regions.size[1] = CONFIG_RW_SIZE - regions.size[0];
	regions.num_regions = (regions.size[1] == 0) ? 1 : 2;

	return regions;
}

int mpu_lock_rw_flash(void)
{
	/* Prevent execution from internal mapped RW flash */
	const uint16_t mpu_attr = MPU_ATTR_XN | MPU_ATTR_RW_RW |
				  MPU_ATTR_FLASH_MEMORY;
	const struct mpu_rw_regions regions = mpu_get_rw_regions();
	int rv;

	rv = mpu_config_region(REGION_STORAGE, regions.addr[0], regions.size[0],
			       mpu_attr, 1);
	if ((rv != EC_SUCCESS) || (regions.num_regions == 1))
		return rv;

	/* If this fails then it's impossible to represent with two regions. */
	return mpu_config_region(REGION_STORAGE2, regions.addr[1],
				 regions.size[1], mpu_attr, 1);
}
#endif /* !CONFIG_EXTERNAL_STORAGE */

#ifdef CONFIG_ROLLBACK_MPU_PROTECT
int mpu_lock_rollback(int lock)
{
	int rv;
	int num_mpu_regions = mpu_num_regions();

	const uint32_t rollback_region_start_address =
		CONFIG_MAPPED_STORAGE_BASE + CONFIG_ROLLBACK_OFF;
	const uint32_t rollback_region_total_size = CONFIG_ROLLBACK_SIZE;
	const uint16_t mpu_attr =
		MPU_ATTR_XN /* Execute never */ |
		MPU_ATTR_NO_NO /* No access (privileged or unprivileged */;

	/*
	 * Originally rollback MPU support was added on Cortex-M7, which
	 * supports 16 MPU regions and has rollback region aligned in a way
	 * that we can use a single region.
	 */
	uint8_t rollback_mpu_region = REGION_ROLLBACK;

	if (rollback_mpu_region < num_mpu_regions) {
		rv = mpu_config_region(rollback_mpu_region,
				       rollback_region_start_address,
				       rollback_region_total_size, mpu_attr,
				       lock);
		return rv;
	}

	/*
	 * If we get here, we can't use REGION_ROLLBACK because our MPU doesn't
	 * have enough regions. Instead, we choose unused MPU regions.
	 *
	 * Note that on the Cortex-M3, Cortex-M4, and Cortex-M7, the base
	 * address used for an MPU region must be aligned to the size of the
	 * region, so it's not possible to use a single region to protect the
	 * entire rollback flash on the STM32F412 (bloonchipper); we have to
	 * use two.
	 *
	 * See mpu_update_region for alignment details.
	 */

	rollback_mpu_region = REGION_CHIP_RESERVED;
	rv = mpu_config_region(rollback_mpu_region,
			       rollback_region_start_address,
			       rollback_region_total_size / 2, mpu_attr, lock);
	if (rv != EC_SUCCESS)
		return rv;

	rollback_mpu_region = REGION_CODE_RAM;
	rv = mpu_config_region(rollback_mpu_region,
			       rollback_region_start_address +
				       (rollback_region_total_size / 2),
			       rollback_region_total_size / 2, mpu_attr, lock);
	return rv;
}
#endif

#ifdef CONFIG_CHIP_UNCACHED_REGION
/* Store temporarily the regions ranges to use them for the MPU configuration */
#define REGION(_name, _flag, _start, _size)                           \
	static const uint32_t CONCAT2(_region_start_, _name)          \
		__attribute__((unused, section(".unused"))) = _start; \
	static const uint32_t CONCAT2(_region_size_, _name)           \
		__attribute__((unused, section(".unused"))) = _size;
#include "memory_regions.inc"
#undef REGION
#endif /* CONFIG_CHIP_UNCACHED_REGION */

int mpu_pre_init(void)
{
	int i;
	int num_mpu_regions;
	int rv;

	if (!has_mpu())
		return EC_ERROR_HW_INTERNAL;

	num_mpu_regions = mpu_num_regions();

	/* Supports MPU with 8 or 16 unified regions */
	if (!mpu_is_unified() ||
	    (num_mpu_regions != 8 && num_mpu_regions != 16))
		return EC_ERROR_UNIMPLEMENTED;

	mpu_disable();

	for (i = 0; i < num_mpu_regions; ++i) {
		/*
		 * Disable all regions.
		 *
		 * We use the smallest possible size (32 bytes), but it
		 * doesn't really matter since the regions are disabled.
		 *
		 * Use the fixed SRAM region base to ensure base is aligned
		 * to the region size.
		 */
		rv = mpu_update_region(i, CORTEX_M_SRAM_BASE, MPU_SIZE_BITS_MIN,
				       0, 0, 0);
		if (rv != EC_SUCCESS)
			return rv;
	}

	if (IS_ENABLED(CONFIG_ROLLBACK_MPU_PROTECT)) {
		rv = mpu_lock_rollback(1);
		if (rv != EC_SUCCESS)
			return rv;
	}

	if (IS_ENABLED(CONFIG_ARMV7M_CACHE)) {
#ifdef CONFIG_CHIP_UNCACHED_REGION
		rv = mpu_config_region(
			REGION_UNCACHED_RAM,
			CONCAT2(_region_start_, CONFIG_CHIP_UNCACHED_REGION),
			CONCAT2(_region_size_, CONFIG_CHIP_UNCACHED_REGION),
			MPU_ATTR_XN | MPU_ATTR_RW_RW, 1);
		if (rv != EC_SUCCESS)
			return rv;

#endif
	}

	mpu_enable();

	if (IS_ENABLED(CONFIG_ARMV7M_CACHE))
		cpu_enable_caches();

	return EC_SUCCESS;
}