1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
|
/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*
* Intersil ILS29035 light sensor driver
*/
#include "driver/als_isl29035.h"
#include "common.h"
#include "i2c.h"
#include "timer.h"
/* I2C interface */
#define ILS29035_I2C_ADDR 0x88
#define ILS29035_REG_COMMAND_I 0
#define ILS29035_REG_COMMAND_II 1
#define ILS29035_REG_DATA_LSB 2
#define ILS29035_REG_DATA_MSB 3
#define ILS29035_REG_INT_LT_LSB 4
#define ILS29035_REG_INT_LT_MSB 5
#define ILS29035_REG_INT_HT_LSB 6
#define ILS29035_REG_INT_HT_MSB 7
#define ILS29035_REG_ID 15
int isl29035_read_lux(int *lux)
{
int rv, lsb, msb, data;
/* Tell it to read once */
rv = i2c_write8(I2C_PORT_ALS, ILS29035_I2C_ADDR,
ILS29035_REG_COMMAND_I, 0x20);
if (rv)
return rv;
/* The highest precision (default) should take ~90ms */
usleep(100 * MSEC);
/* NOTE: It is necessary to read the LSB first, then the MSB. If you do
* it in the opposite order, the results are not correct. This is
* apparently an undocumented "feature".
*/
/* Read lsb */
rv = i2c_read8(I2C_PORT_ALS, ILS29035_I2C_ADDR,
ILS29035_REG_DATA_LSB, &lsb);
if (rv)
return rv;
/* Read msb */
rv = i2c_read8(I2C_PORT_ALS, ILS29035_I2C_ADDR,
ILS29035_REG_DATA_MSB, &msb);
if (rv)
return rv;
data = (msb << 8) | lsb;
/*
* The default power-on values will give 16 bits of precision:
* 0x0000-0xffff indicates 0-1000 lux. If you change the defaults,
* you'll need to change the scale factor accordingly.
*/
*lux = data * 1000 / 0xffff;
return EC_SUCCESS;
}
|