path: root/driver/charger/sm5803.h

/* Copyright 2020 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 *
 * Silicon Mitus SM5803 Buck-Boost Charger
 */

#ifndef __CROS_EC_SM5803_H
#define __CROS_EC_SM5803_H

#include "common.h"

/* Note: configure charger struct with CHARGER_FLAGS */
#define SM5803_ADDR_MAIN_FLAGS		0x30
#define SM5803_ADDR_MEAS_FLAGS		0x31
#define SM5803_ADDR_CHARGER_FLAGS	0x32
#define SM5803_ADDR_TEST_FLAGS		0x37

/* Main registers (address 0x30) */

#define SM5803_REG_CHIP_ID		0x00

#define SM5803_REG_STATUS1		0x01
#define SM5803_STATUS1_VSYS_OK		BIT(0)
#define SM5803_STATUS1_VPWR_OK		BIT(1)
#define SM5803_STATUS1_VBUS_UVL		BIT(3)
#define SM5803_STATUS1_VBUS_SHORT	BIT(4)
#define SM5803_STATUS1_VBUS_OVH		BIT(5)
#define SM5803_STATUS1_CHG_DET		BIT(6)
#define SM5803_STATUS1_BAT_DET		BIT(7)

#define SM5803_REG_STATUS2		0x02
#define SM5803_STATUS2_BAT_DET_FG	BIT(1)
#define SM5803_STATUS2_VBAT_SHORT	BIT(0)

#define SM5803_REG_INT1_REQ			0x05
#define SM5803_REG_INT1_EN			0x0A
#define SM5803_INT1_VBUS_PWR_HWSAFE_LIMIT	BIT(0)
#define SM5803_INT1_CHG				BIT(2)
#define SM5803_INT1_BAT				BIT(3)
#define SM5803_INT1_CLS_OC			BIT(4)
#define SM5803_INT1_SLV_DET			BIT(5)
#define SM5803_INT1_SWL_DISCH			BIT(6)
#define SM5803_INT1_PREREG			BIT(7)

#define SM5803_REG_INT2_REQ		0x06
#define SM5803_REG_INT2_EN		0x0B
#define SM5803_INT2_VBATSNSP		BIT(0)
#define SM5803_INT2_IBAT_DISCHG		BIT(1)
#define SM5803_INT2_IBAT_CHG		BIT(2)
#define SM5803_INT2_IBUS		BIT(3)
#define SM5803_INT2_VBUS		BIT(4)
#define SM5803_INT2_VCHGPWR		BIT(5)
#define SM5803_INT2_VSYS		BIT(6)
#define SM5803_INT2_TINT		BIT(7)

#define SM5803_REG_INT3_REQ			0x07
#define SM5803_REG_INT3_EN			0x0C
#define SM5803_INT3_GPADC0			BIT(0)
#define SM5803_INT3_BFET_PWR_LIMIT		BIT(1)
#define SM5803_INT3_BFET_PWR_HWSAFE_LIMIT	BIT(2)
#define SM5803_INT3_SPARE			BIT(3)
#define SM5803_INT3_VBUS_PWR_LIMIT		BIT(4)
#define SM5803_INT3_IBAT			BIT(5)

#define SM5803_REG_INT4_REQ		0x08
#define SM5803_REG_INT4_EN		0x0D
#define SM5803_INT4_CHG_FAIL		BIT(0)
#define SM5803_INT4_CHG_DONE		BIT(1)
#define SM5803_INT4_CHG_START		BIT(2)
#define SM5803_INT4_SLP_EXIT		BIT(3)
#define SM5803_INT4_OTG_FAIL		BIT(4)
#define SM5803_INT4_CHG_ILIM		BIT(5)
#define SM5803_INT4_IBAT_CC		BIT(6)
#define SM5803_INT4_CC			BIT(7)

#define SM5803_REG_MISC_CONFIG		0x15
#define SM5803_MISC_INV_INT		BIT(0)
#define SM5803_INT_CLEAR_MODE		BIT(1)
#define SM5803_INT_MASK_MODE		BIT(2)

#define SM5803_REG_PLATFORM		0x18
#define SM5803_PLATFORM_ID		GENMASK(4, 0)

#define SM5803_REG_REFERENCE		0x20
#define SM5803_REFERENCE_LDO3P3_PGOOD	BIT(4)
#define SM5803_REFERENCE_LDO5_PGOOD	BIT(5)

#define SM5803_REG_CLOCK_SEL		0x2A
#define SM5803_CLOCK_SEL_LOW		BIT(0)

#define SM5803_REG_GPIO0_CTRL		0x30
#define SM5803_GPIO0_VAL		BIT(0)
#define SM5803_GPIO0_MODE_MASK		GENMASK(2, 1)
#define SM5803_GPIO0_OPEN_DRAIN_EN	BIT(6)
#define SM5803_CHG_DET_OPEN_DRAIN_EN	BIT(7)

#define SM5803_REG_VBATSNSP_MEAS_MSB	0x40
#define SM5803_REG_VBATSNSP_MEAS_LSB	0x41

enum sm5803_gpio0_modes {
	GPIO0_MODE_PROCHOT,
	GPIO0_MODE_OUTPUT,
	GPIO0_MODE_INPUT
};

#define SM5803_REG_BFET_PWR_MAX_TH		0x35
#define SM5803_REG_BFET_PWR_HWSAFE_MAX_TH	0x36

#define SM5803_REG_PORTS_CTRL		0x40
#define SM5803_PORTS_VBUS_DISCH		BIT(0)
#define SM5803_PORTS_VBUS_PULLDOWN	BIT(1)
#define SM5803_PORTS_VBUS_SNS_DISCH	BIT(2)
#define SM5803_PORTS_VBUS_SNS_PULLDOWN	BIT(3)

/* ADC Registers (address 0x31) */

/*
 * Note: Some register bits must be enabled for the DC-DC converter to properly
 * handle transitions.
 */
#define SM5803_REG_GPADC_CONFIG1	0x01
#define SM5803_GPADCC1_VBATSNSP_EN	BIT(0)
#define SM5803_GPADCC1_IBAT_DIS_EN	BIT(1)
#define SM5803_GPADCC1_IBAT_CHG_EN	BIT(2)
#define SM5803_GPADCC1_IBUS_EN		BIT(3)
#define SM5803_GPADCC1_VBUS_EN		BIT(4)
#define SM5803_GPADCC1_VCHGPWR_EN	BIT(5)  /* NOTE: DO NOT CLEAR */
#define SM5803_GPADCC1_VSYS_EN		BIT(6)  /* NOTE: DO NOT CLEAR */
#define SM5803_GPADCC1_TINT_EN		BIT(7)

#define SM5803_REG_GPADC_CONFIG2	0x02

#define SM5803_REG_PSYS1		0x04
#define SM5803_PSYS1_DAC_EN		BIT(0)

/* Note: Threshold registers all assume lower 2 bits are 0 */
#define SM5803_REG_VBUS_LOW_TH		0x1A
#define SM5803_REG_VBATSNSP_MAX_TH  0x26
#define SM5803_REG_VBUS_HIGH_TH		0x2A
#define SM5803_REG_VCHG_PWR_LOW_TH	0x1B
#define SM5803_REG_VCHG_PWR_HIGH_TH	0x2B
#define SM5803_REG_TINT_LOW_TH		0x1D
#define SM5803_REG_TINT_HIGH_TH		0x2D

/*
 * Vbus levels increment in 23.4 mV, set thresholds to below 3.5V and above 4.0V
 * to mirror what TCPCI uses for Vbus present indication
 */
#define SM5803_VBUS_LOW_LEVEL		0x25
#define SM5803_VBUS_HIGH_LEVEL		0x2C



/*
 * TINT thresholds.  TINT steps are in 0.43 K with the upper threshold set to
 * 360 K and lower threshold to de-assert PROCHOT at 330 K.
 */
#define SM5803_TINT_LOW_LEVEL		0xBF
#define SM5803_TINT_HIGH_LEVEL		0xD1

#define SM5803_TINT_MAX_LEVEL		0xFF
#define SM5803_TINT_MIN_LEVEL		0x00

/*
 * Set minimum thresholds for VBUS_PWR_LOW_TH interrupt generation
 * 2S battery 9.4v
 * 3S battery 14.1V VBUS_PWR MIN TH
 */
#define SM5803_VBAT_PWR_MINTH_3S_LEVEL 0x9B
#define SM5803_VBAT_PWR_MINTH_2S_LEVEL 0x9B

/*
 * Set thresholds for VBATSNSP_MAX_TH GPADC interrupt generation
 * 2S battery 9v
 * 3S battery 13.3V
 */
#define SM5803_VBAT_SNSP_MAXTH_3S_LEVEL 0xD8
#define SM5803_VBAT_SNSP_MAXTH_2S_LEVEL 0xDC

/* IBAT levels - The IBAT levels increment in 7.32mA */
#define SM5803_REG_IBAT_CHG_MEAS_MSB		0x44
#define SM5803_REG_IBAT_CHG_MEAS_LSB		0x45
#define SM5803_REG_IBAT_CHG_AVG_MEAS_MSB	0xC4
#define SM5803_REG_IBAT_CHG_AVG_MEAS_LSB	0xC5
#define SM5803_IBAT_CHG_MEAS_LSB	GENMASK(1, 0)

/* IBUS levels - The IBUS levels increment in 7.32mA */
#define SM5803_REG_IBUS_CHG_MEAS_MSB	0x46
#define SM5803_REG_IBUS_CHG_MEAS_LSB	0x47
#define SM5803_IBUS_CHG_MEAS_LSB	GENMASK(1, 0)

#define SM5803_REG_VBUS_MEAS_MSB	0x48
#define SM5803_REG_VBUS_MEAS_LSB	0x49
#define SM5803_VBUS_MEAS_LSB		GENMASK(1, 0)
#define SM5803_VBUS_MEAS_BAT_DET	BIT(2)
#define SM5803_VBUS_MEAS_VBUS_SHORT	BIT(4)
#define SM5803_VBUS_MEAS_OV_TEMP	BIT(5)
#define SM5803_VBUS_MEAS_CHG_DET	BIT(6)

/* VCHGPWR levels - The VCHGPWR levels increment in 23.4mV steps. */
#define SM5803_REG_VCHG_PWR_MSB		0x4A

#define SM5803_REG_TINT_MEAS_MSB	0x4E

/* VSYS levels - The VSYS levels increment in  23.4mV steps. */
#define SM5803_REG_VSYS_MEAS_MSB	0x4C
#define SM5803_REG_VSYS_MEAS_LSB	0x4D
#define SM5803_REG_VSYS_AVG_MEAS_MSB	0xCC
#define SM5803_REG_VSYS_AVG_MEAS_LSB	0xCD
#define SM5803_VSYS_MEAS_LSB		GENMASK(1, 0)

/* Charger registers (address 0x32) */

#define SM5803_REG_CC_CONFIG1		0x01
#define SM5803_CC_CONFIG1_SD_PWRUP	BIT(3)

#define SM5803_REG_FLOW1		0x1C
#define SM5803_FLOW1_MODE		GENMASK(1, 0)
#define SM5803_FLOW1_DIRECTCHG_SRC_EN	BIT(2)
#define SM5803_FLOW1_LINEAR_CHARGE_EN	BIT(3)
#define SM5803_FLOW1_USB_SUSP		BIT(7)

enum sm5803_charger_modes {
	CHARGER_MODE_DISABLED,
	CHARGER_MODE_SINK,
	CHARGER_MODE_RESERVED,
	CHARGER_MODE_SOURCE,
};

#define SM5803_REG_FLOW2		0x1D
#define SM5803_FLOW2_AUTO_TRKL_EN	BIT(0)
#define SM5803_FLOW2_AUTO_PRECHG_EN	BIT(1)
#define SM5803_FLOW2_AUTO_FASTCHG_EN	BIT(2)
#define SM5803_FLOW2_AUTO_ENABLED	GENMASK(2, 0)
#define SM5803_FLOW2_FW_TRKL_CMD	BIT(3)
#define SM5803_FLOW2_FW_PRECHG_CMD	BIT(4)
#define SM5803_FLOW2_FW_FASTCHG_CMD	BIT(5)
#define SM5803_FLOW2_HOST_MODE_EN	BIT(6)
#define SM5803_FLOW2_AUTO_CHGEN_SET	BIT(7)

#define SM5803_REG_FLOW3		0x1E
#define SM5803_FLOW3_SWITCH_BCK_BST	BIT(0)
#define SM5803_FLOW3_FW_SWITCH_RESUME	BIT(1)
#define SM5803_FLOW3_FW_SWITCH_PAUSE	BIT(2)
#define SM5803_FLOW3_SOFT_DISABLE_EN	BIT(3)

#define SM5803_REG_SWITCHER_CONF	0x1F
#define SM5803_SW_BCK_BST_CONF_AUTO	BIT(0)

#define SM5803_REG_ANA_EN1		0x21
#define SM5803_ANA_EN1_CLS_DISABLE	BIT(7)

/*
 * Input current limit is CHG_ILIM_RAW *100 mA
 */
#define SM5803_REG_CHG_ILIM		0x24
#define SM5803_CHG_ILIM_RAW		GENMASK(4, 0)
#define SM5803_CURRENT_STEP		100
#define SM5803_REG_TO_CURRENT(r)	((r) * SM5803_CURRENT_STEP)
#define SM5803_CURRENT_TO_REG(c)	((c) / SM5803_CURRENT_STEP)

/*
 * DPM Voltage loop regulation contains the 8 bits with MSB register
 * and the lower 3 bits with LSB register.
 * The regulation value is 2.72 V + DPM_VL_SET * 10mV
 */
#define SM5803_REG_DPM_VL_SET_MSB		0x26
#define SM5803_REG_DPM_VL_SET_LSB		0x27

/*
 * Output voltage uses the same equation as Vsys
 * Lower saturation value is 3 V, upper 20.5 V
 */
#define SM5803_REG_VPWR_MSB		0x30
#define SM5803_REG_DISCH_CONF2		0x31
#define SM5803_DISCH_CONF5_VPWR_LSB	GENMASK(2, 0)

/*
 * Output current limit is CLS_LIMIT * 50 mA and saturates to 3.2 A
 */
#define SM5803_REG_DISCH_CONF5		0x34
#define SM5803_DISCH_CONF5_CLS_LIMIT	GENMASK(6, 0)
#define SM5803_CLS_CURRENT_STEP		50

#define SM5803_REG_DISCH_CONF6		0x35
#define SM5803_DISCH_CONF6_RAMPS_DIS	BIT(0)
#define SM5803_DISCH_CONF6_SMOOTH_DIS	BIT(1)

/*
 * Vsys is 11 bits, with the lower 3 bits in the LSB register.
 * The pre-regulation value is 2.72 V + Vsys_prereg * 10 mV
 * Lower saturation value is 3V, upper is 20V
 */
#define SM5803_REG_VSYS_PREREG_MSB	0x36
#define SM5803_REG_VSYS_PREREG_LSB	0x37
#define SM5803_VOLTAGE_STEP		10
#define SM5803_VOLTAGE_SHIFT		2720
#define SM5803_REG_TO_VOLTAGE(r)	(SM5803_VOLTAGE_SHIFT + \
					 (r) * SM5803_VOLTAGE_STEP)
#define SM5803_VOLTAGE_TO_REG(v)	(((v) - SM5803_VOLTAGE_SHIFT) \
					 / SM5803_VOLTAGE_STEP)

/*
 * Precharge Termination threshold.
 */
#define SM5803_REG_PRE_FAST_CONF_REG1	0x39
#define SM5803_VBAT_PRE_TERM_MIN_DV	23
/* 3.8V+ gets rounded to 4V */
#define SM5803_VBAT_PRE_TERM_MAX_DV	38
#define SM5803_VBAT_PRE_TERM		GENMASK(7, 4)
#define SM5803_VBAT_PRE_TERM_SHIFT	4

/*
 * Vbat for fast charge uses the same equation as Vsys
 * Lower saturation value is 3V, upper is dependent on number of cells
 */
#define SM5803_REG_VBAT_FAST_MSB	0x3A
#define SM5803_REG_VBAT_FAST_LSB	0x3B

/*
 * Fast charge current limit is ICHG_FAST * 100 mA
 * Value read back may be adjusted if tempearture limits are exceeded
 */
#define SM5803_REG_FAST_CONF4		0x3C
#define SM5803_CONF4_ICHG_FAST		GENMASK(5, 0)

/* Fast charge Termination */
#define SM5803_REG_FAST_CONF5		0x3D
#define SM5803_CONF5_IBAT_EOC_TH	GENMASK(3, 0)

/* IR drop compensation */
#define SM5803_REG_IR_COMP1		0x3F
#define SM5803_IR_COMP_RES_SET_MSB	GENMASK(7, 6)
#define SM5803_IR_COMP_RES_SET_MSB_SHIFT 6
#define SM5803_IR_COMP_EN		BIT(5)

/* LSB is in 1.67mOhm steps. */
#define SM5803_REG_IR_COMP2		0x40

/* Precharge current limit is also intervals of 100 mA */
#define SM5803_REG_PRECHG		0x41
#define SM5803_PRECHG_ICHG_PRE_SET	GENMASK(5, 0)

#define SM5803_REG_LOG1			0x42
#define SM5803_BATFET_ON		BIT(2)

#define SM5803_REG_LOG2			0x43
#define SM5803_ISOLOOP_ON		BIT(1)

#define SM5803_REG_STATUS_CHG_REG	0x48
#define SM5803_STATUS_CHG_BATT_REMOVAL	BIT(0)
#define SM5803_STATUS_CHG_CHG_REMOVAL	BIT(1)
#define SM5803_STATUS_CHG_BATTEMP_NOK	BIT(2)
#define SM5803_STATUS_CHG_CHGWDG_EXP	BIT(3)
#define SM5803_STATUS_CHG_VBUS_OC	BIT(4)
#define SM5803_STATUS_CHG_OV_VBAT	BIT(5)
#define SM5803_STATUS_CHG_TIMEOUT	BIT(6)
#define SM5803_STATUS_CHG_OV_ITEMP	BIT(7)

#define SM5803_REG_STATUS_DISCHG	0x49
#define SM5803_STATUS_DISCHG_BATT_REM	BIT(0)
#define SM5803_STATUS_DISCHG_UV_VBAT	BIT(1)
#define SM5803_STATUS_DISCHG_VBUS_OC	BIT(2)
#define SM5803_STATUS_DISCHG_VBUS_PWR	GENMASK(4, 3)
#define SM5803_STATUS_DISCHG_ISO_CURR	BIT(5)
#define SM5803_STATUS_DISCHG_VBUS_SHORT	BIT(6)
#define SM5803_STATUS_DISCHG_OV_ITEMP	BIT(7)

#define SM5803_REG_CHG_MON_REG		0x5C
#define SM5803_DPM_LOOP_EN		BIT(0)

#define SM5803_REG_PHOT1		0x72
#define SM5803_PHOT1_IBAT_PHOT_COMP_EN	BIT(0)
#define SM5803_PHOT1_IBUS_PHOT_COMP_EN	BIT(1)
#define SM5803_PHOT1_VSYS_MON_EN	BIT(2)
#define SM5803_PHOT1_VBUS_MON_EN	BIT(3)
#define SM5803_PHOT1_COMPARATOR_EN	GENMASK(3, 0)
#define SM5803_PHOT1_DURATION		GENMASK(6, 4)
#define SM5803_PHOT1_DURATION_SHIFT	4
#define SM5803_PHOT1_IRQ_MODE		BIT(7)

#define CHARGER_NAME "sm5803"

#define CHARGE_V_MAX 20000
#define CHARGE_V_MIN SM5803_VOLTAGE_SHIFT
#define CHARGE_V_STEP SM5803_VOLTAGE_STEP

#define CHARGE_I_MAX 6300
#define CHARGE_I_MIN 0
#define CHARGE_I_STEP SM5803_CURRENT_STEP

#define INPUT_I_MAX 3100
#define INPUT_I_MIN 0
#define INPUT_I_STEP SM5803_CURRENT_STEP

/* Expose cached Vbus presence */
int sm5803_is_vbus_present(int chgnum);

/* Expose functions to control charger's GPIO and CHG_DET configuration */
enum ec_error_list sm5803_configure_gpio0(int chgnum,
					  enum sm5803_gpio0_modes mode, int od);
enum ec_error_list sm5803_set_gpio0_level(int chgnum, int level);
enum ec_error_list sm5803_configure_chg_det_od(int chgnum, int enable);
enum ec_error_list sm5803_get_chg_det(int chgnum, int *chg_det);

/* Expose Vbus discharge function */
enum ec_error_list sm5803_set_vbus_disch(int chgnum, int enable);
enum ec_error_list sm5803_vbus_sink_enable(int chgnum, int enable);

void sm5803_hibernate(int chgnum);
void sm5803_interrupt(int chgnum);

/**
 * Return whether ACOK is high or low.
 *
 * @param chgnum index into chg_chips table.
 * @param acok will be set to true if ACOK is asserted, otherwise false.
 * @return EC_SUCCESS, error otherwise.
 */
enum ec_error_list sm5803_is_acok(int chgnum, bool *acok);

/* Expose low power mode functions */
void sm5803_disable_low_power_mode(int chgnum);
void sm5803_enable_low_power_mode(int chgnum);

extern const struct charger_drv sm5803_drv;

/* Expose interrupt handler for processing in PD_INT task when needed */
void sm5803_handle_interrupt(int chgnum);

#endif