1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
|
/* Copyright 2018 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*
* TI LM3630A LED driver.
*/
#include "i2c.h"
#include "lm3630a.h"
/* 8-bit I2C address */
#define LM3630A_I2C_ADDR (0x36 << 1)
static inline int lm3630a_write(uint8_t reg, uint8_t val)
{
return i2c_write8(I2C_PORT_KBLIGHT, LM3630A_I2C_ADDR, reg, val);
}
static inline int lm3630a_read(uint8_t reg, int *val)
{
return i2c_read8(I2C_PORT_KBLIGHT, LM3630A_I2C_ADDR, reg, val);
}
int lm3630a_poweron(void)
{
int ret = 0;
/* Sample PWM every 8 periods. */
ret |= lm3630a_write(LM3630A_REG_FILTER_STRENGTH, 0x3);
/* Enable feedback and PWM for banks A & B. */
ret |= lm3630a_write(LM3630A_REG_CONFIG,
LM3630A_CFG_BIT_FB_EN_A |
LM3630A_CFG_BIT_FB_EN_B |
LM3630A_CFG_BIT_PWM_EN_A |
LM3630A_CFG_BIT_PWM_EN_B);
/* 24V, 800mA overcurrent protection, 500kHz boost frequency. */
ret |= lm3630a_write(LM3630A_REG_BOOST_CONTROL,
LM3630A_BOOST_OVP_24V |
LM3630A_BOOST_OCP_800MA |
LM3630A_FMODE_500KHZ);
/* Limit current to 24.5mA */
ret |= lm3630a_write(LM3630A_REG_A_CURRENT, 0x1a);
ret |= lm3630a_write(LM3630A_REG_B_CURRENT, 0x1a);
/* Enable both banks, put in linear mode, and connect LED2 to bank A. */
ret |= lm3630a_write(LM3630A_REG_CONTROL,
LM3630A_CTRL_BIT_LINEAR_A |
LM3630A_CTRL_BIT_LINEAR_B |
LM3630A_CTRL_BIT_LED_EN_A |
LM3630A_CTRL_BIT_LED_EN_B |
LM3630A_CTRL_BIT_LED2_ON_A);
/*
* Set full brightness so that PWM will control. This needs to happen
* after setting the control register, because enabling the banks
* resets the value to 0.
*/
ret |= lm3630a_write(LM3630A_REG_A_BRIGHTNESS, 0xff);
return ret;
}
int lm3630a_poweroff(void)
{
return lm3630a_write(LM3630A_REG_CONTROL, LM3630A_CTRL_BIT_SLEEP_CMD);
}
|
