1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
|
/* Copyright 2018 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*
* O2 Micro OZ554 LED driver.
*/
#include "console.h"
#include "gpio.h"
#include "hooks.h"
#include "i2c.h"
#include "task.h"
#include "timer.h"
#define CPRINTS(format, args...) cprints(CC_I2C, format, ## args)
#define CPRINTF(format, args...) cprintf(CC_I2C, format, ## args)
#define I2C_ADDR_OZ554 0x62
#define OZ554_DATA_SIZE 6
struct oz554_value {
uint8_t offset;
uint8_t data;
};
/* This ordering is suggested by vendor. */
static const struct oz554_value order[] = {
/*
* Reigster 0x01: Operation frequency control
* Frequency selection: 300(KHz)
* Short circuit protection: 8(V)
*/
{.offset = 1, .data = 0x43},
/*
* Reigster 0x02: LED current amplitude control
* ISET Resistor: 10.2(Kohm)
* Maximum LED current: 1636/10.2 = 160.4(mA)
* Setting LED current: 65(mA)
*/
{.offset = 2, .data = 0x65},
/*
* Reigster 0x03: LED backlight Status
* Status function: Read only
*/
{.offset = 3, .data = 0x00},
/*
* Reigster 0x04: LED current control with SMBus
* SMBus PWM function: None Use
*/
{.offset = 4, .data = 0x00},
/*
* Reigster 0x05: OVP, OCP control
* Over Current Protection: 0.5(V)
* Panel LED Voltage(Max): 47.8(V)
* OVP setting: 54(V)
*/
{.offset = 5, .data = 0x97},
/*
* Reigster 0x00: Dimming mode and string ON/OFF control
* String Selection: 4(Number)
* Interface Selection: 1
* Brightness mode: 3
*/
{.offset = 0, .data = 0xF2},
};
BUILD_ASSERT(ARRAY_SIZE(order) == OZ554_DATA_SIZE);
static void set_oz554_reg(void)
{
int i;
for (i = 0; i < OZ554_DATA_SIZE; ++i) {
int rv = i2c_write8(I2C_PORT_BACKLIGHT, I2C_ADDR_OZ554,
order[i].offset, order[i].data);
if (rv) {
CPRINTS("Write OZ554 register %d failed rv=%d" , i, rv);
return;
}
}
}
static void backlight_enable_deferred(void)
{
if (gpio_get_level(GPIO_PANEL_BACKLIGHT_EN))
set_oz554_reg();
}
DECLARE_DEFERRED(backlight_enable_deferred);
void backlight_enable_interrupt(enum gpio_signal signal)
{
hook_call_deferred(&backlight_enable_deferred_data, 30 * MSEC);
}
static void on_chipset_resume(void)
{
gpio_enable_interrupt(GPIO_PANEL_BACKLIGHT_EN);
}
DECLARE_HOOK(HOOK_CHIPSET_RESUME, on_chipset_resume, HOOK_PRIO_DEFAULT);
static void on_chipset_shutdown(void)
{
gpio_disable_interrupt(GPIO_PANEL_BACKLIGHT_EN);
}
DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, on_chipset_shutdown, HOOK_PRIO_DEFAULT);
|