blob: f94a3e8e109ca10f6b89b011892e0d13f5048650 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
|
/* Copyright 2017 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* TI SN5S330 Type-C Power Path Controller */
#ifndef __CROS_EC_SN5S330_H
#define __CROS_EC_SN5S330_H
#include "common.h"
#include "driver/ppc/sn5s330_public.h"
struct sn5s330_config {
uint8_t i2c_port;
uint8_t i2c_addr_flags;
};
extern const struct sn5s330_config sn5s330_chips[];
extern const unsigned int sn5s330_cnt;
/* Power Path Indices */
enum sn5s330_pp_idx {
SN5S330_PP1,
SN5S330_PP2,
SN5S330_PP_COUNT,
};
#define SN5S330_FUNC_SET1 0x50
#define SN5S330_FUNC_SET2 0x51
#define SN5S330_FUNC_SET3 0x52
#define SN5S330_FUNC_SET4 0x53
#define SN5S330_FUNC_SET5 0x54
#define SN5S330_FUNC_SET6 0x55
#define SN5S330_FUNC_SET7 0x56
#define SN5S330_FUNC_SET8 0x57
#define SN5S330_FUNC_SET9 0x58
#define SN5S330_FUNC_SET10 0x59
#define SN5S330_FUNC_SET11 0x5A
#define SN5S330_FUNC_SET12 0x5B
#define SN5S330_INT_STATUS_REG1 0x2F
#define SN5S330_INT_STATUS_REG2 0x30
#define SN5S330_INT_STATUS_REG3 0x31
#define SN5S330_INT_STATUS_REG4 0x32
#define SN5S330_INT_TRIP_RISE_REG1 0x20
#define SN5S330_INT_TRIP_RISE_REG2 0x21
#define SN5S330_INT_TRIP_RISE_REG3 0x22
#define SN5S330_INT_TRIP_FALL_REG1 0x23
#define SN5S330_INT_TRIP_FALL_REG2 0x24
#define SN5S330_INT_TRIP_FALL_REG3 0x25
#define SN5S330_INT_MASK_RISE_REG1 0x26
#define SN5S330_INT_MASK_RISE_REG2 0x27
#define SN5S330_INT_MASK_RISE_REG3 0x28
#define SN5S330_INT_MASK_FALL_REG1 0x29
#define SN5S330_INT_MASK_FALL_REG2 0x2A
#define SN5S330_INT_MASK_FALL_REG3 0x2B
#define PPX_ILIM_DEGLITCH_0_US_20 0x1
#define PPX_ILIM_DEGLITCH_0_US_50 0x2
#define PPX_ILIM_DEGLITCH_0_US_100 0x3
#define PPX_ILIM_DEGLITCH_0_US_200 0x4
#define PPX_ILIM_DEGLITCH_0_US_1000 0x5
#define PPX_ILIM_DEGLITCH_0_US_2000 0x6
#define PPX_ILIM_DEGLITCH_0_US_10000 0x7
/* Internal VBUS Switch Current Limit Settings (min) */
#define SN5S330_ILIM_0_35 0
#define SN5S330_ILIM_0_63 1
#define SN5S330_ILIM_0_90 2
#define SN5S330_ILIM_1_14 3
#define SN5S330_ILIM_1_38 4
#define SN5S330_ILIM_1_62 5
#define SN5S330_ILIM_1_86 6
#define SN5S330_ILIM_2_10 7
#define SN5S330_ILIM_2_34 8
#define SN5S330_ILIM_2_58 9
#define SN5S330_ILIM_2_82 10
#define SN5S330_ILIM_3_06 11
#define SN5S330_ILIM_3_30 12
/* FUNC_SET_2 */
#define SN5S330_SBU_EN BIT(4)
/* FUNC_SET_3 */
#define SN5S330_PP1_EN BIT(0)
#define SN5S330_PP2_EN BIT(1)
#define SN5S330_VBUS_DISCH_EN BIT(2)
#define SN5S330_SET_RCP_MODE_PP1 BIT(5)
#define SN5S330_SET_RCP_MODE_PP2 BIT(6)
/* FUNC_SET_4 */
#define SN5S330_VCONN_EN BIT(0)
#define SN5S330_CC_POLARITY BIT(1)
#define SN5S330_CC_EN BIT(4)
#define SN5S330_VCONN_ILIM_SEL BIT(5)
/* FUNC_SET_8 */
#define SN5S330_VCONN_DEGLITCH_MASK (3 << 6)
#define SN5S330_VCONN_DEGLITCH_63_US (0 << 6)
#define SN5S330_VCONN_DEGLITCH_125_US BIT(6)
#define SN5S330_VCONN_DEGLITCH_640_US (2 << 6)
#define SN5S330_VCONN_DEGLITCH_1280_US (3 << 6)
/* FUNC_SET_9 */
#define SN5S330_FORCE_OVP_EN_SBU BIT(1)
#define SN5S330_PP2_CONFIG BIT(2)
#define SN5S330_OVP_EN_CC BIT(4)
#define SN5S330_CONFIG_UVP BIT(5)
#define SN5S330_FORCE_ON_VBUS_OVP BIT(6)
#define SN5S330_FORCE_ON_VBUS_UVP BIT(7)
/* INT_STATUS_REG3 */
#define SN5S330_VBUS_GOOD BIT(0)
/* INT_STATUS_REG4 */
#define SN5S330_DIG_RES BIT(0)
#define SN5S330_DB_BOOT BIT(1)
#define SN5S330_VSAFE0V_STAT BIT(2)
#define SN5S330_VSAFE0V_MASK BIT(3)
/*
* INT_MASK_RISE/FALL_EDGE_1
*
* The ILIM_PP1 bit indicates an overcurrent condition when sourcing on power
* path 1. For rising edge registers, this indicates an overcurrent has
* occured; similarly for falling edge, it means the overcurrent condition is no
* longer present.
*/
#define SN5S330_ILIM_PP1_MASK BIT(4)
/*
* INT_MASK_RISE/FALL_EDGE2
*
* The VCONN_ILIM bit indicates an overcurrent condition on VCONN. By default,
* VCONN will be latched off.
*/
#define SN5S330_VCONN_ILIM (1 << 1)
/*
* INT_MASK_RISE/FALL_EDGE2
*
* The OV_CC1_CON/OV_CC2_CON bit indicates an over-voltage occurred on
* C_CC1/C_CC2.
*/
#define SN5S330_CC1_CON (1 << 2)
#define SN5S330_CC2_CON (1 << 3)
/*
* INT_MASK_RISE/FALL_EDGE_3
*
* The VBUS_GOOD bit indicates VBUS has increased beyond a 4.0V threshold.
* For rising edge registers, this indicates VBUS has risen above 4.0V.
* For falling edge registers, this indicates VBUS has fallen below 4.0V.
*/
#define SN5S330_VBUS_GOOD_MASK BIT(0)
#endif /* defined(__CROS_EC_SN5S330_H) */
|
