blob: 65bddf22b1c919ca552f014d856a6cc71f8d18be (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
|
/*
* Copyright 2019 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Nuvoton Type-C port controller */
#ifndef __CROS_EC_USB_PD_TCPM_NCT38XX_H
#define __CROS_EC_USB_PD_TCPM_NCT38XX_H
/* Chip variant ID (Part number) */
#define NCT38XX_VARIANT_MASK 0x1C
#define NCT38XX_VARIANT_3807 0x0
#define NCT38XX_VARIANT_3808 0x2
/* There are two IO ports in NCT3807 */
#define NCT38XX_NCT3807_MAX_IO_PORT 2
/* There is only one IO port in NCT3808 */
#define NCT38XX_NCT3808_MAX_IO_PORT 1
#define NCT38XX_SUPPORT_GPIO_FLAGS (GPIO_OPEN_DRAIN | GPIO_INPUT | \
GPIO_OUTPUT | GPIO_LOW | GPIO_HIGH | GPIO_INT_F_RISING | \
GPIO_INT_F_FALLING | GPIO_INT_F_HIGH | GPIO_INT_F_LOW)
/* I2C interface */
#define NCT38XX_I2C_ADDR1_1_FLAGS 0x70
#define NCT38XX_I2C_ADDR1_2_FLAGS 0x71
#define NCT38XX_I2C_ADDR1_3_FLAGS 0x72
#define NCT38XX_I2C_ADDR1_4_FLAGS 0x73
#define NCT38XX_I2C_ADDR2_1_FLAGS 0x74
#define NCT38XX_I2C_ADDR2_2_FLAGS 0x75
#define NCT38XX_I2C_ADDR2_3_FLAGS 0x76
#define NCT38XX_I2C_ADDR2_4_FLAGS 0x77
#define NCT38XX_REG_VENDOR_ID_L 0x00
#define NCT38XX_REG_VENDOR_ID_H 0x01
#define NCT38XX_VENDOR_ID 0x0416
#define NCT38XX_PRODUCT_ID 0xC301
#define NCT38XX_REG_GPIO_DATA_IN(n) (0xC0 + ((n) * 8))
#define NCT38XX_REG_GPIO_DATA_OUT(n) (0xC1 + ((n) * 8))
#define NCT38XX_REG_GPIO_DIR(n) (0xC2 + ((n) * 8))
#define NCT38XX_REG_GPIO_OD_SEL(n) (0xC3 + ((n) * 8))
#define NCT38XX_REG_GPIO_ALERT_RISE(n) (0xC4 + ((n) * 8))
#define NCT38XX_REG_GPIO_ALERT_FALL(n) (0xC5 + ((n) * 8))
#define NCT38XX_REG_GPIO_ALERT_LEVEL(n) (0xC6 + ((n) * 8))
#define NCT38XX_REG_GPIO_ALERT_MASK(n) (0xC7 + ((n) * 8))
#define NCT38XX_REG_MUX_CONTROL 0xD0
#define NCT38XX_REG_GPIO_ALERT_STAT(n) (0xD4 + (n))
/* NCT3808 only supports GPIO 2/3/4/6/7 */
#define NCT38XXX_3808_VALID_GPIO_MASK 0xDC
#define NCT38XX_REG_CTRL_OUT_EN 0xD2
#define NCT38XX_REG_CTRL_OUT_EN_SRCEN (1 << 0)
#define NCT38XX_REG_CTRL_OUT_EN_FASTEN (1 << 1)
#define NCT38XX_REG_CTRL_OUT_EN_SNKEN (1 << 2)
#define NCT38XX_REG_CTRL_OUT_EN_CONNDIREN (1 << 6)
#define NCT38XX_RESET_HOLD_DELAY_MS 1
#define NCT38XX_RESET_POST_DELAY_MS 0
extern const struct tcpm_drv nct38xx_tcpm_drv;
/*
* The interrupt handler to handle Vendor Define ALERT event from IOEX chip.
*
* Normally, the Vendor Define event should be checked by the NCT38XX TCPCI
* driver's tcpc_alert function.
* This function is only included when NCT38XX TCPC driver is not included.
* (i.e. CONFIG_USB_PD_TCPM_NCT38XX is not defined)
*/
void nct38xx_ioex_handle_alert(int ioex);
/*
* Check which IO's interrupt event is triggered. If any, call its
* registered interrupt handler.
*/
int nct38xx_ioex_event_handler(int ioex);
extern const struct ioexpander_drv nct38xx_ioexpander_drv;
#endif /* defined(__CROS_EC_USB_PD_TCPM_NCT38XX_H) */
|