blob: 4e5ef82cd593e49240f6e8fcf9498da49de57e25 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
|
/* Copyright 2020 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*
* TCPC driver for Renesas RAA489000 Buck-boost charger with TCPC
*/
#include "compile_time_macros.h"
#include "usb_pd_tcpm.h"
#ifndef __CROS_EC_USB_PD_TCPM_RAA489000_H
#define __CROS_EC_USB_PD_TCPM_RAA489000_H
#define RAA489000_TCPC0_I2C_FLAGS 0x22
#define RAA489000_TCPC1_I2C_FLAGS 0x23
#define RAA489000_TCPC2_I2C_FLAGS 0x24
#define RAA489000_TCPC3_I2C_FLAGS 0x25
/* Vendor registers */
#define RAA489000_TCPC_SETTING1 0x80
#define RAA489000_VBUS_VOLTAGE_TARGET 0x90
#define RAA489000_VBUS_CURRENT_TARGET 0x92
#define RAA489000_VBUS_OCP_UV_THRESHOLD 0x94
#define RAA489000_TYPEC_SETTING1 0xC0
#define RAA489000_PD_PHYSICAL_SETTING1 0xE0
#define RAA489000_PD_PHYSICAL_PARAMETER1 0xE8
/* TCPC_SETTING_1 */
#define RAA489000_TCPCV1_0_EN BIT(0)
#define RAA489000_TCPC_PWR_CNTRL BIT(4)
/* VBUS_CURRENT_TARGET */
#define RAA489000_VBUS_CURRENT_TARGET_3A 0x66 /* 3.0A + iOvershoot */
#define RAA489000_VBUS_CURRENT_TARGET_1_5A 0x38 /* 1.5A + iOvershoot */
/* VBUS_VOLTAGE_TARGET */
#define RAA489000_VBUS_VOLTAGE_TARGET_5160MV 0x102 /* 5.16V */
#define RAA489000_VBUS_VOLTAGE_TARGET_5220MV 0x105 /* 5.22V */
/* VBUS_OCP_UV_THRESHOLD */
/* Detect voltage level of overcurrent protection during Sourcing VBUS */
#define RAA489000_OCP_THRESHOLD_VALUE 0x00BE /* 4.75V */
/* TYPEC_SETTING1 - only older silicon */
/* Enables for reverse current protection */
#define RAA489000_SETTING1_IP2_EN BIT(9)
#define RAA489000_SETTING1_IP1_EN BIT(8)
/* Switches from dead-battery Rd */
#define RAA489000_SETTING1_RDOE BIT(7)
/* CC comparator enables */
#define RAA489000_SETTING1_CC2_CMP3_EN BIT(6)
#define RAA489000_SETTING1_CC2_CMP2_EN BIT(5)
#define RAA489000_SETTING1_CC2_CMP1_EN BIT(4)
#define RAA489000_SETTING1_CC1_CMP3_EN BIT(3)
#define RAA489000_SETTING1_CC1_CMP2_EN BIT(2)
#define RAA489000_SETTING1_CC1_CMP1_EN BIT(1)
/* CC debounce enable */
#define RAA489000_SETTING1_CC_DB_EN BIT(0)
/* PD_PHYSICAL_SETTING_1 */
#define RAA489000_PD_PHY_SETTING1_RECEIVER_EN BIT(9)
#define RAA489000_PD_PHY_SETTING1_SQUELCH_EN BIT(8)
#define RAA489000_PD_PHY_SETTING1_TX_LDO11_EN BIT(0)
/* PD_PHYSICAL_PARMETER_1 */
#define PD_PHY_PARAM1_NOISE_FILTER_CNT_MASK (GENMASK(4, 0))
/**
*
* Set output current limit on the TCPC. Note, this chip also offers an OTG
* current level register in the charger i2c page but we must use the TCPC
* current limit because the TCPC is controlling Vbus.
*
* @param port USB-C port number
* @param rp Rp value for current limit (either 1.5A or 3A)
*
* @return Zero if the current limit set was successful, non-zero otherwise
*/
int raa489000_set_output_current(int port, enum tcpc_rp_value rp);
extern const struct tcpm_drv raa489000_tcpm_drv;
#endif
|