1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
|
/* Copyright 2023 The ChromiumOS Authors
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include <zephyr/drivers/emul.h>
#include <zephyr/drivers/gpio.h>
const struct gpio_dt_spec *
sm5803_emul_get_interrupt_gpio(const struct emul *emul);
struct i2c_common_emul_data *sm5803_emul_get_i2c_main(const struct emul *emul);
struct i2c_common_emul_data *sm5803_emul_get_i2c_chg(const struct emul *emul);
struct i2c_common_emul_data *sm5803_emul_get_i2c_meas(const struct emul *emul);
struct i2c_common_emul_data *sm5803_emul_get_i2c_test(const struct emul *emul);
/**
* Read the value of a charger page register, by address.
*
* This is useful to verify that a user has written an expected value to a
* register, without depending on the user's corresponding getter function.
*
* @return negative value on error, otherwise 8-bit register value.
*/
int sm5803_emul_read_chg_reg(const struct emul *emul, uint8_t reg);
/**
* Set the reported VBUS voltage, in mV.
*
* If the VBUS voltage crosses the charger detection threshold as a result,
* a CHG_DET interrupt will automatically be triggered.
*/
void sm5803_emul_set_vbus_voltage(const struct emul *emul, uint16_t mv);
/** Set the reported input current (from VBUS), in mA. */
void sm5803_emul_set_input_current(const struct emul *emul, uint16_t mv);
/** Set the reported battery charge current, in mA. */
void sm5803_emul_set_battery_current(const struct emul *emul, uint16_t ma);
/** Set the reported device ID (default 3). */
void sm5803_emul_set_device_id(const struct emul *emul, uint8_t id);
/** Set the platform ID as configured in hardware by the PMODE resistor. */
void sm5803_emul_set_pmode(const struct emul *emul, uint8_t pmode);
/** Get the register value of ICHG_FAST_SET; the fast charge current limit. */
int sm5803_emul_get_fast_charge_current_limit(const struct emul *emul);
/** Get the values of the GPADC_CONFIG_1 and GPADC_CONFIG_2 registers. */
void sm5803_emul_get_gpadc_conf(const struct emul *emul, uint8_t *conf1,
uint8_t *conf2);
/** Set the GPADC enable bits in GPADC_CONFIG_1 and GPADC_CONFIG_2 registers. */
void sm5803_emul_set_gpadc_conf(const struct emul *emul, uint8_t conf1,
uint8_t conf2);
/** Return whether the main clock is slowed (CLOCK_SEL:LOW_POWER_CLOCK_EN). */
bool sm5803_emul_is_clock_slowed(const struct emul *emul);
/** Get the value of the CC_CONFIG_1 register. */
uint8_t sm5803_emul_get_cc_config(const struct emul *emul);
/** Get the values of the FLOW1..FLOW3 registers. */
void sm5803_emul_get_flow_regs(const struct emul *emul, uint8_t *flow1,
uint8_t *flow2, uint8_t *flow3);
/**
* Set the INT_REQ_* registers to indicate pending interrupts.
*
* This does not clear pending IRQs; it only asserts them. IRQs are cleared only
* when the interrupt status registers are read.
*/
void sm5803_emul_set_irqs(const struct emul *emul, uint8_t irq1, uint8_t irq2,
uint8_t irq3, uint8_t irq4);
/** Get the value of the GPIO_CTRL_1 register, which controls GPIO0. */
uint8_t sm5803_emul_get_gpio_ctrl(const struct emul *emul);
/**
* Get the values of the IR_COMP1 and IR_COMP2 registers.
*
* Register values are concatenated, with COMP1 as MSB and COMP2 as LSB.
*/
uint16_t sm5803_emul_get_ir_comp(const struct emul *emul);
|
