Coreutils Contribution Guidelines Prerequisites ============= You will need the "git" version control tools. On Fedora-based systems, do "yum install git". On Debian-based ones install the "git-core" package. Then run "git --version". If that says it's older than version 1.4.4, then you'd do well to get a newer version. At worst, just download the latest stable release from https://git-scm.com/ and build from source. For details on building the programs in this package, see the file, README-hacking. Use the latest upstream sources =============================== Base any changes you make on the latest upstream sources. You can get a copy of the latest with this command: git clone https://git.savannah.gnu.org/git/coreutils.git cd coreutils That downloads the entire repository, including revision control history dating back to 1991. The repository (the part you download, and which resides in coreutils/.git) currently weighs in at about 30MB. So you don't want to download it more often than necessary. Once downloaded, you can get incremental updates by running one of these commands from inside your new coreutils/ directory: If you have made *no* changes: git pull If you *have* made changes and mistakenly committed them to "master", do the following to put your changes on a private branch, "br", and to restore master to its unmodified (relative-to-upstream) state: git checkout -b br git checkout master git reset --hard origin Then "git pull" should work. *Before* you commit changes =========================== In this project, we much prefer patches that automatically record authorship. That is important not just to give credit where due, but also from a legal standpoint (see below). To create author-annotated patches with git, you must first tell git who you are. That information is best recorded in your ~/.gitconfig file. Edit that file, creating it if needed, and put your name and email address in place of these example values: [user] name = Joe X. User email = joe.user@example.com Your first commit: the quick and dirty way ========================================== First of all, realize that to "commit" a change in git is a purely local operation. It affects only the local repository (the .git/ dir) in your current coreutils/ hierarchy. To try this out, modify a file or two. If you create a new file, you'll need to tell git about it with "git add new-file.c". Commit all changes with "git commit -a". That prompts you for a log message, which should include a one-line summary, a blank line, and ChangeLog-style entries for all affected files. More on that below. Once your change is committed, you can create a proper patch that includes a log message and authorship information as well as any permissions changes. Use this command to save that single, most-recent change set: git format-patch --stdout -1 > DIFF The trouble with this approach is that you've just checked in a change (remember, it's only local) on the "master" branch, and that's where new changes would normally appear when you pull the latest from "upstream". When you "pull" from a remote repository to get the latest, your local changes on "master" may well induce conflicts. For this reason, you may want to keep "master" free of any local changes, so that you can use it to track unadulterated upstream sources. However, if your cloned directory is for a one-shot patch submission and you're going to remove it right afterwards, then this approach is fine. Otherwise, for a more sustainable (and more generally useful, IMHO) process, read on about "topic" branches. Make your changes on a private "topic" branch ============================================= So you checked out coreutils like this: git clone https://git.savannah.gnu.org/git/coreutils.git Now, cd into the coreutils/ directory and run: git checkout -b my-topic That creates the my-topic branch and puts you on it. To see which branch you're on, type "git branch". Right after the clone, you were on "master" (aka the trunk). To get back to the trunk, do this: git checkout master Note 1: Be careful to run "git pull" only when on the "master" branch, not when on a branch. With newer versions of git, you can't cause trouble if you forget, so this is a good reason to ensure you're using 1.5.3.1 or newer. Note 2: It's best not to try to switch from one branch to another if you have pending (uncommitted) changes. Sometimes it works, sometimes the checkout will fail, telling you that your local modifications conflict with changes required to switch branches. However, in any case, you will *not* lose your uncommitted changes. Run "git stash" to temporarily hide uncommitted changes in your local directory, restoring a clean working directory. Anyhow, get back onto your just-created branch: git checkout my-topic Now, modify some file and commit it: git commit some-file.c Personally, no matter what package I'm working on, I find it useful to put the ChangeLog entries *only* in the commit log, initially, unless I plan to commit/push right away. Otherwise, I tend to get unnecessary merge conflicts with each rebase (see below). In coreutils, I've gone a step further, and no longer maintain an explicit ChangeLog file in version control. Instead, in a git working directory, you can view ChangeLog information via "git log". However, each distribution tarball does include a ChangeLog file that is automatically generated from the git logs. So, you've committed a change. But it's only in your local repository, and only on your "my-topic" branch. Let's say you wait a day, and then see that someone else changed something and pushed it to the public repository. Now, you want to update your trunk and "rebase" your changes on the branch so that they are once again relative to the tip of the trunk. Currently, your branch is attached to the trunk at the next-to-last change set. First: update the trunk from the public repo: [you've first made sure that "git diff" produces no output] git checkout master git pull Now, return to your branch, and "rebase" relative to trunk (master): git checkout my-topic git rebase master If there are no conflicts, this requires no more work from you. However, let's say there was one in ChangeLog, since you didn't follow my advice and modified it anyway. git rebase will tell you there was a conflict and in which file, and instruct you to resolve it and then resume with "git rebase --continue" once that's done. So you resolve as usual, by editing ChangeLog (which has the usual conflict markers), then type "git rebase --continue". That will fail, with a diagnostic telling you to mark the file as "conflict resolved" by doing this: git add ChangeLog Then, finally, you can proceed (possibly onto more conflict resolution, if there are conflicts in other files): git rebase --continue Once it finishes, your changes on the branch are now relative to the tip of the trunk. Now use git format-patch, as above. Amending the most recent change on your private branch ====================================================== Let's say you've just committed a change on your private branch, and then realize that something about it is not right. It's easy to adjust: edit your files # this can include running "git add NEW" or "git rm BAD" git commit --amend -a git format-patch --stdout -1 > your-branch.diff That replaces the most recent change-set with the revised one. Coreutils-specific: No more ChangeLog files ======================= Do not modify any of the ChangeLog files in coreutils. Starting in 2008, the policy changed. Before, we would insert the exact same text (or worse, sometimes slightly differing) into both the ChangeLog file and the commit log. Now we put that information only in the commit log, and generate the top-level ChangeLog file from logs at "make dist" time. As such, there are strict requirements on the form of the commit log messages. Commit log requirements ======================= Your commit log should always start with a one-line summary, the second line should be blank, and the remaining lines are usually ChangeLog-style entries for all affected files. However, it's fine -- even recommended -- to write a few lines of prose describing the change, when the summary and ChangeLog entries don't give enough of the big picture. Omit the leading TABs that you're used to seeing in a "real" ChangeLog file, but keep the maximum line length at 72 or smaller, so that the generated ChangeLog lines, each with its leading TAB, will not exceed 80 columns. As for the ChangeLog-style content, please follow these guidelines: https://www.gnu.org/prep/standards/standards.html#Change-Logs Try to make the summary line fit one of the following forms: program_name: change-description prog1, prog2: change-description doc: change-description tests: change-description build: change-description maint: change-description If your commit fixes a bug, try to find the commit that introduced that bug. If you do that, add a note in your new commit log saying something like "Introduced by commit v8.12-103-g54cbe6e." and add something like [bug introduced in coreutils-8.13] in the corresponding NEWS blurb. Assuming you found the bug in commit 54cbe6e6, "git describe 54cbe6e6" will print the longer tag-relative string that you'll need. Note that we used to use an 8-byte SHA1 prefix like "54cbe6e6", because that was automatically rendered as a clickable link by "gitk", but with git-1.7.10, the more descriptive version-containing "git describe" format that we now require is also highlighted. Curly braces: use judiciously ============================= Omit the curly braces around an "if", "while", "for" etc. body only when that body occupies a single line. In every other case we require the braces. This ensures that it is trivially easy to identify a single-*statement* loop: each has only one *line* in its body. Omitting braces with a single-line body is fine: while (expr) single_line_stmt (); However, the moment your loop/if/else body extends onto a second line, for whatever reason (even if it's just an added comment), then you should add braces. Otherwise, it would be too easy to insert a statement just before that comment (without adding braces), thinking it is already a multi-statement loop: while (true) /* comment... */ // BAD: multi-line body without braces single_line_stmt (); Do this instead: while (true) { /* Always put braces around a multi-line body. */ /* explanation... */ single_line_stmt (); } There is one exception: when the second body line is not at the same indentation level as the first body line. if (expr) error (0, 0, _("a diagnostic that would make this line" " extend past the 80-column limit")); It is safe to omit the braces in the code above, since the further-indented second body line makes it obvious that this is still a single-statement body. To reiterate, don't do this: if (expr) while (expr_2) // BAD: multi-line body without braces { ... } Do this, instead: if (expr) { while (expr_2) { ... } } However, there is one exception in the other direction, when even a one-line block should have braces. That occurs when that one-line, brace-less block is an "else" block, and the corresponding "then" block *does* use braces. In that case, either put braces around the "else" block, or negate the "if"-condition and swap the bodies, putting the one-line block first and making the longer, multi-line block be the "else" block. if (expr) { ... ... } else x = y; // BAD: braceless "else" with braced "then" This is preferred, especially when the multi-line body is more than a few lines long, because it is easier to read and grasp the semantics of an if-then-else block when the simpler block occurs first, rather than after the more involved block: if (!expr) x = y; /* more readable */ else { ... ... } If you'd rather not negate the condition, then add braces: if (expr) { ... ... } else { x = y; } Use SPACE-only indentation in all[*] files ========================================== We use space-only indentation in nearly all files. If you use Emacs and your coreutils working directory name matches, this code enables the right mode: ;; In coreutils, indent with spaces everywhere (not TABs). ;; Exceptions: Makefile and ChangeLog modes. (add-hook 'find-file-hook '(lambda () (if (and buffer-file-name (string-match "/coreutils\\>" (buffer-file-name)) (not (string-equal mode-name "Change Log")) (not (string-equal mode-name "Makefile"))) (setq indent-tabs-mode nil)))) If you use vim (7+ compiled with autocommands), and coreutils working directory name also matches, add the following in ~/.vimrc: " Set GNU style indentation, spaces instead of TABs function! CoreutilsIndent() " Check if 'coreutils' is part of the current working directory if match(getcwd(), "coreutils") > 0 " The next 3 lines below set the GNU indentation setlocal cinoptions=>4,n-2,{2,^-2,:2,=2,g0,h2,p5,t0,+2,(0,u0,w1,m1 setlocal shiftwidth=2 setlocal tabstop=8 " Coreutils specific, expand TABs with spaces setlocal expandtab endif endfunction autocmd BufEnter *.c,*.h call CoreutilsIndent() [*] Makefile and ChangeLog files are exempt, of course. Send patches to the address listed in --help output =================================================== Please follow the guidelines in the "Sending your patches." section of git's own SubmittingPatches: https://github.com/git/git/blob/master/Documentation/SubmittingPatches Add documentation ================= If you add a feature or change some user-visible aspect of a program, document it. If you add an option, document it both in --help output (i.e., in the usage function that generates the --help output) and in doc/*.texi. The man pages are generated from --help output, so you shouldn't need to change anything under man/. User-visible changes are usually documented in NEWS, too. When writing prose (documentation, comments, log entries), use an active voice, not a passive one. I.e., say "print the frobnozzle", not "the frobnozzle will be printed". Please add comments per the GNU Coding Standard: https://www.gnu.org/prep/standards/html_node/Comments.html Minor syntactic preferences =========================== [I hesitate to write this one down, because it appears to be an acquired taste, at least for native-English speakers. It seems odd (if not truly backwards) to nearly anyone who doesn't have a strong mathematics background and perhaps a streak of something odd in their character ;-) ] In writing arithmetic comparisons, use "<" and "<=" rather than ">" and ">=". For some justification, read this: http://www.gelato.unsw.edu.au/archives/git/0505/4507.html const placement: Write "Type const *var", not "const Type *var". FIXME: dig up justification Be nice to translators ====================== Don't change translatable strings if you can avoid it. If you must rearrange individual lines (e.g., in multi-line --help strings), extract and create new strings, rather than extracting and moving into existing blocks. This avoids making unnecessary work for translators. Add tests ========== Nearly every significant change must be accompanied by a test suite addition that exercises it. If you fix a bug, add at least one test that fails without the patch, but that succeeds once your patch is applied. If you add a feature, add tests to exercise as much of the new code as possible. If you add a new test file (as opposed to adding a test to an existing test file) add the new test file to 'tests/local.mk'. Note to run tests/misc/new-test in isolation you can do: make check TESTS=tests/misc/new-test SUBDIRS=. VERBOSE=yes Variables that are significant for tests with their default values are: VERBOSE=yes RUN_EXPENSIVE_TESTS=no RUN_VERY_EXPENSIVE_TESTS=no SHELL=/bin/sh NON_ROOT_USERNAME=nobody NON_ROOT_GID=$(id -g $NON_ROOT_USERNAME) COREUTILS_GROUPS=$(id -G) There are hundreds of tests in the tests/ directories. You can use tests/sample-test as a template, or one of the various Perl-based ones in tests/misc. If writing tests is not your thing, don't worry too much about it, but do provide scenarios, input/output pairs, or whatever, along with examples of running the tool to demonstrate the new or changed feature, and someone else will massage that into a test (writing portable tests can be a challenge). Copyright assignment ==================== If your change is significant (i.e., if it adds more than ~10 lines), then you'll have to have a copyright assignment on file with the FSF. Since that involves first an email exchange between you and the FSF, and then the exchange (FSF to you, then back) of an actual sheet of paper with your signature on it, and finally, some administrative processing in Boston, the process can take a few weeks. The forms to choose from are in gnulib's doc/Copyright/ directory. If you want to assign a single change, you should use the file, doc/Copyright/request-assign.changes: https://www.gnu.org/software/gnulib/Copyright/request-assign.changes If you would like to assign past and future contributions to a project, you'd use doc/Copyright/request-assign.future: https://www.gnu.org/software/gnulib/Copyright/request-assign.future You may make assignments for up to four projects at a time. In case you're wondering why we bother with all of this, read this: https://www.gnu.org/licenses/why-assign.html Run "make syntax-check", or even "make distcheck" ================================================ Making either of those targets runs many integrity and project-specific policy-conformance tests. For example, the former ensures that you add no trailing blanks and no uses of certain deprecated functions. The latter performs all "syntax-check" tests, and also ensures that the build completes with no warnings when using a certain set of gcc -W... options. Don't even bother running "make distcheck" unless you have a reasonably up to date installation including recent versions of gcc and the linux kernel, and modern GNU tools. Ensure that your changes are indented properly. =============================================== Format the code the way GNU indent does. Filtering most source files through "indent --no-tabs" should induce no change in indentation. Try not to add any more. Avoid trailing white space ========================== You may notice that the only trailing blanks in coreutils' version-controlled files are in a single directory: tests/pr, which contains expected output from various invocations of pr. Do not add any more trailing blanks anywhere. While "make syntax-check" will alert you if you slip up, it's better to nip any problem in the bud, as you're typing. A good way to help you adapt to this rule is to configure your editor to highlight any offending characters in the files you edit. If you use Emacs, customize its font-lock mode or use its WhiteSpace mode: https://www.emacswiki.org/emacs/WhiteSpace If you use vim, add this to ~/.vimrc: let c_space_errors=1 highlight RedundantSpaces ctermbg=red guibg=red match RedundantSpaces /\s\+$\| \+\ze\t/ Git can help too, by stopping you from committing any change that would add trailing blanks. The example pre-commit hook contains code to check for trailing whitespace and spaces before tabs; enable it by moving it to the right place and making sure it is executable: mv .git/hooks/pre-commit.sample .git/hooks/pre-commit With a repository created by git-1.5.6 or older, use this command: chmod +x .git/hooks/pre-commit To manually check for whitespace errors before committing, you can use git diff --check Git also has some settings to enable suitable internal whitespace checks. See the manpage for git-apply for details. ------------------------------------------- Miscellaneous useful git commands ================================= * gitk: give a graphical view of the revision graph of the current branch * gitk --all: same, but display all branches * git log: to get most of the same info in text form * git log -p: same as above, but with diffs * git log -p SOME_FILE: same as above, but limit to SOME_FILE * git log -p -2 SOME_FILE: same as above, but print only two deltas * git log -p -1: print the most recently committed change set * git format-patch --stdout -1 > FILE: output the most recently committed change set, in a format suitable to be submitted and/or applied via "git am FILE". * git reset --soft HEAD^: Commit the delta required to restore state to the revision just before HEAD (i.e., next-to-last). * git rebase -i master: run this from on a branch, and it gives you an interface with which you can reorder and modify arbitrary change sets on that branch. * if you "misplace" a change set, i.e., via git reset --hard ..., so that it's no longer reachable by any branch, you can use "git fsck" to find its SHA1 and then tag it or cherry-pick it onto an existing branch. For example, run this: git fsck --lost-found HEAD && cd .git/lost-found/commit \ && for i in *; do git show $i|grep SOME_IDENTIFYING_STRING \ && echo $i; done The "git fsck ..." command creates the .git/lost-found/... hierarchy listing all unreachable objects. Then the for loop print SHA1s for commits that match via log or patch. For example, say that found 556fbb57216b119155cdda824c98dc579b8121c8, you could run "git show 556fbb57216b119" to examine the change set, or "git checkout -b found 556fbb5721" to give it a branch name. Finally, you might run "git checkout master && git cherry-pick 556fbb5721" to put that change on the tip of "master". ------------------------------------------- Finding things to do ==================== If you don't know where to start, check out the TODO file for projects that look like they're at your skill-/interest-level. Another good option is always to improve tests. You never know what you might uncover when you improve test coverage, and even if you don't find any bugs your contribution is sure to be appreciated. A good way to quickly assess current test coverage, for standard and root only tests, is to follow these steps (requires lcov to be installed): # Do a standard run as the current user make -j$(nproc) coverage # Add the root only tests sudo make -j$(nproc) build-coverage NON_ROOT_USERNAME=$USER SUBDIRS=. # Generate the report with the combined results make gen-coverage # view the HTML report: xdg-open doc/coverage/index.html ======================================================================== Copyright (C) 2009-2023 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the "GNU Free Documentation License" file as part of this distribution.