From 5d4c6d95015015bdc10eba4d6687018d2cc172d3 Mon Sep 17 00:00:00 2001 From: Zachary Ware Date: Sat, 17 Sep 2016 01:25:24 -0500 Subject: Closes #27979: Remove bundled copy of libffi An installed copy of libffi is now required for building _ctypes on any platform but OSX and Windows. --- Modules/_ctypes/libffi/aclocal.m4 | 1961 ------------------------------------- 1 file changed, 1961 deletions(-) delete mode 100644 Modules/_ctypes/libffi/aclocal.m4 (limited to 'Modules/_ctypes/libffi/aclocal.m4') diff --git a/Modules/_ctypes/libffi/aclocal.m4 b/Modules/_ctypes/libffi/aclocal.m4 deleted file mode 100644 index 6292fbab7a..0000000000 --- a/Modules/_ctypes/libffi/aclocal.m4 +++ /dev/null @@ -1,1961 +0,0 @@ -# generated automatically by aclocal 1.13.4 -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. - -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, -[m4_warning([this file was generated for autoconf 2.69. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically 'autoreconf'.])]) - -# ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*- -# -# Copyright (C) 1999-2006, 2007, 2008, 2011 Free Software Foundation, Inc. -# Written by Thomas Tanner, 1999 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 18 LTDL_INIT - -# LT_CONFIG_LTDL_DIR(DIRECTORY, [LTDL-MODE]) -# ------------------------------------------ -# DIRECTORY contains the libltdl sources. It is okay to call this -# function multiple times, as long as the same DIRECTORY is always given. -AC_DEFUN([LT_CONFIG_LTDL_DIR], -[AC_BEFORE([$0], [LTDL_INIT]) -_$0($*) -])# LT_CONFIG_LTDL_DIR - -# We break this out into a separate macro, so that we can call it safely -# internally without being caught accidentally by the sed scan in libtoolize. -m4_defun([_LT_CONFIG_LTDL_DIR], -[dnl remove trailing slashes -m4_pushdef([_ARG_DIR], m4_bpatsubst([$1], [/*$])) -m4_case(_LTDL_DIR, - [], [dnl only set lt_ltdl_dir if _ARG_DIR is not simply `.' - m4_if(_ARG_DIR, [.], - [], - [m4_define([_LTDL_DIR], _ARG_DIR) - _LT_SHELL_INIT([lt_ltdl_dir=']_ARG_DIR['])])], - [m4_if(_ARG_DIR, _LTDL_DIR, - [], - [m4_fatal([multiple libltdl directories: `]_LTDL_DIR[', `]_ARG_DIR['])])]) -m4_popdef([_ARG_DIR]) -])# _LT_CONFIG_LTDL_DIR - -# Initialise: -m4_define([_LTDL_DIR], []) - - -# _LT_BUILD_PREFIX -# ---------------- -# If Autoconf is new enough, expand to `${top_build_prefix}', otherwise -# to `${top_builddir}/'. -m4_define([_LT_BUILD_PREFIX], -[m4_ifdef([AC_AUTOCONF_VERSION], - [m4_if(m4_version_compare(m4_defn([AC_AUTOCONF_VERSION]), [2.62]), - [-1], [m4_ifdef([_AC_HAVE_TOP_BUILD_PREFIX], - [${top_build_prefix}], - [${top_builddir}/])], - [${top_build_prefix}])], - [${top_builddir}/])[]dnl -]) - - -# LTDL_CONVENIENCE -# ---------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. LIBLTDL will be prefixed with -# '${top_build_prefix}' if available, otherwise with '${top_builddir}/', -# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single -# quotes!). If your package is not flat and you're not using automake, -# define top_build_prefix, top_builddir, and top_srcdir appropriately -# in your Makefiles. -AC_DEFUN([LTDL_CONVENIENCE], -[AC_BEFORE([$0], [LTDL_INIT])dnl -dnl Although the argument is deprecated and no longer documented, -dnl LTDL_CONVENIENCE used to take a DIRECTORY orgument, if we have one -dnl here make sure it is the same as any other declaration of libltdl's -dnl location! This also ensures lt_ltdl_dir is set when configure.ac is -dnl not yet using an explicit LT_CONFIG_LTDL_DIR. -m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl -_$0() -])# LTDL_CONVENIENCE - -# AC_LIBLTDL_CONVENIENCE accepted a directory argument in older libtools, -# now we have LT_CONFIG_LTDL_DIR: -AU_DEFUN([AC_LIBLTDL_CONVENIENCE], -[_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) -_LTDL_CONVENIENCE]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBLTDL_CONVENIENCE], []) - - -# _LTDL_CONVENIENCE -# ----------------- -# Code shared by LTDL_CONVENIENCE and LTDL_INIT([convenience]). -m4_defun([_LTDL_CONVENIENCE], -[case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; -esac -LIBLTDL='_LT_BUILD_PREFIX'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdlc.la" -LTDLDEPS=$LIBLTDL -LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}" - -AC_SUBST([LIBLTDL]) -AC_SUBST([LTDLDEPS]) -AC_SUBST([LTDLINCL]) - -# For backwards non-gettext consistent compatibility... -INCLTDL="$LTDLINCL" -AC_SUBST([INCLTDL]) -])# _LTDL_CONVENIENCE - - -# LTDL_INSTALLABLE -# ---------------- -# sets LIBLTDL to the link flags for the libltdl installable library -# and LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called from here. If an installed libltdl -# is not found, LIBLTDL will be prefixed with '${top_build_prefix}' if -# available, otherwise with '${top_builddir}/', and LTDLINCL will be -# prefixed with '${top_srcdir}/' (note the single quotes!). If your -# package is not flat and you're not using automake, define top_build_prefix, -# top_builddir, and top_srcdir appropriately in your Makefiles. -# In the future, this macro may have to be called after LT_INIT. -AC_DEFUN([LTDL_INSTALLABLE], -[AC_BEFORE([$0], [LTDL_INIT])dnl -dnl Although the argument is deprecated and no longer documented, -dnl LTDL_INSTALLABLE used to take a DIRECTORY orgument, if we have one -dnl here make sure it is the same as any other declaration of libltdl's -dnl location! This also ensures lt_ltdl_dir is set when configure.ac is -dnl not yet using an explicit LT_CONFIG_LTDL_DIR. -m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl -_$0() -])# LTDL_INSTALLABLE - -# AC_LIBLTDL_INSTALLABLE accepted a directory argument in older libtools, -# now we have LT_CONFIG_LTDL_DIR: -AU_DEFUN([AC_LIBLTDL_INSTALLABLE], -[_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) -_LTDL_INSTALLABLE]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBLTDL_INSTALLABLE], []) - - -# _LTDL_INSTALLABLE -# ----------------- -# Code shared by LTDL_INSTALLABLE and LTDL_INIT([installable]). -m4_defun([_LTDL_INSTALLABLE], -[if test -f $prefix/lib/libltdl.la; then - lt_save_LDFLAGS="$LDFLAGS" - LDFLAGS="-L$prefix/lib $LDFLAGS" - AC_CHECK_LIB([ltdl], [lt_dlinit], [lt_lib_ltdl=yes]) - LDFLAGS="$lt_save_LDFLAGS" - if test x"${lt_lib_ltdl-no}" = xyes; then - if test x"$enable_ltdl_install" != xyes; then - # Don't overwrite $prefix/lib/libltdl.la without --enable-ltdl-install - AC_MSG_WARN([not overwriting libltdl at $prefix, force with `--enable-ltdl-install']) - enable_ltdl_install=no - fi - elif test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - fi -fi - -# If configure.ac declared an installable ltdl, and the user didn't override -# with --disable-ltdl-install, we will install the shipped libltdl. -case $enable_ltdl_install in - no) ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLDEPS= - LTDLINCL= - ;; - *) enable_ltdl_install=yes - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='_LT_BUILD_PREFIX'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdl.la" - LTDLDEPS=$LIBLTDL - LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}" - ;; -esac - -AC_SUBST([LIBLTDL]) -AC_SUBST([LTDLDEPS]) -AC_SUBST([LTDLINCL]) - -# For backwards non-gettext consistent compatibility... -INCLTDL="$LTDLINCL" -AC_SUBST([INCLTDL]) -])# LTDL_INSTALLABLE - - -# _LTDL_MODE_DISPATCH -# ------------------- -m4_define([_LTDL_MODE_DISPATCH], -[dnl If _LTDL_DIR is `.', then we are configuring libltdl itself: -m4_if(_LTDL_DIR, [], - [], - dnl if _LTDL_MODE was not set already, the default value is `subproject': - [m4_case(m4_default(_LTDL_MODE, [subproject]), - [subproject], [AC_CONFIG_SUBDIRS(_LTDL_DIR) - _LT_SHELL_INIT([lt_dlopen_dir="$lt_ltdl_dir"])], - [nonrecursive], [_LT_SHELL_INIT([lt_dlopen_dir="$lt_ltdl_dir"; lt_libobj_prefix="$lt_ltdl_dir/"])], - [recursive], [], - [m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])])dnl -dnl Be careful not to expand twice: -m4_define([$0], []) -])# _LTDL_MODE_DISPATCH - - -# _LT_LIBOBJ(MODULE_NAME) -# ----------------------- -# Like AC_LIBOBJ, except that MODULE_NAME goes into _LT_LIBOBJS instead -# of into LIBOBJS. -AC_DEFUN([_LT_LIBOBJ], [ - m4_pattern_allow([^_LT_LIBOBJS$]) - _LT_LIBOBJS="$_LT_LIBOBJS $1.$ac_objext" -])# _LT_LIBOBJS - - -# LTDL_INIT([OPTIONS]) -# -------------------- -# Clients of libltdl can use this macro to allow the installer to -# choose between a shipped copy of the ltdl sources or a preinstalled -# version of the library. If the shipped ltdl sources are not in a -# subdirectory named libltdl, the directory name must be given by -# LT_CONFIG_LTDL_DIR. -AC_DEFUN([LTDL_INIT], -[dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -dnl We need to keep our own list of libobjs separate from our parent project, -dnl and the easiest way to do that is redefine the AC_LIBOBJs macro while -dnl we look for our own LIBOBJs. -m4_pushdef([AC_LIBOBJ], m4_defn([_LT_LIBOBJ])) -m4_pushdef([AC_LIBSOURCES]) - -dnl If not otherwise defined, default to the 1.5.x compatible subproject mode: -m4_if(_LTDL_MODE, [], - [m4_define([_LTDL_MODE], m4_default([$2], [subproject])) - m4_if([-1], [m4_bregexp(_LTDL_MODE, [\(subproject\|\(non\)?recursive\)])], - [m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])]) - -AC_ARG_WITH([included_ltdl], - [AS_HELP_STRING([--with-included-ltdl], - [use the GNU ltdl sources included here])]) - -if test "x$with_included_ltdl" != xyes; then - # We are not being forced to use the included libltdl sources, so - # decide whether there is a useful installed version we can use. - AC_CHECK_HEADER([ltdl.h], - [AC_CHECK_DECL([lt_dlinterface_register], - [AC_CHECK_LIB([ltdl], [lt_dladvise_preload], - [with_included_ltdl=no], - [with_included_ltdl=yes])], - [with_included_ltdl=yes], - [AC_INCLUDES_DEFAULT - #include ])], - [with_included_ltdl=yes], - [AC_INCLUDES_DEFAULT] - ) -fi - -dnl If neither LT_CONFIG_LTDL_DIR, LTDL_CONVENIENCE nor LTDL_INSTALLABLE -dnl was called yet, then for old times' sake, we assume libltdl is in an -dnl eponymous directory: -AC_PROVIDE_IFELSE([LT_CONFIG_LTDL_DIR], [], [_LT_CONFIG_LTDL_DIR([libltdl])]) - -AC_ARG_WITH([ltdl_include], - [AS_HELP_STRING([--with-ltdl-include=DIR], - [use the ltdl headers installed in DIR])]) - -if test -n "$with_ltdl_include"; then - if test -f "$with_ltdl_include/ltdl.h"; then : - else - AC_MSG_ERROR([invalid ltdl include directory: `$with_ltdl_include']) - fi -else - with_ltdl_include=no -fi - -AC_ARG_WITH([ltdl_lib], - [AS_HELP_STRING([--with-ltdl-lib=DIR], - [use the libltdl.la installed in DIR])]) - -if test -n "$with_ltdl_lib"; then - if test -f "$with_ltdl_lib/libltdl.la"; then : - else - AC_MSG_ERROR([invalid ltdl library directory: `$with_ltdl_lib']) - fi -else - with_ltdl_lib=no -fi - -case ,$with_included_ltdl,$with_ltdl_include,$with_ltdl_lib, in - ,yes,no,no,) - m4_case(m4_default(_LTDL_TYPE, [convenience]), - [convenience], [_LTDL_CONVENIENCE], - [installable], [_LTDL_INSTALLABLE], - [m4_fatal([unknown libltdl build type: ]_LTDL_TYPE)]) - ;; - ,no,no,no,) - # If the included ltdl is not to be used, then use the - # preinstalled libltdl we found. - AC_DEFINE([HAVE_LTDL], [1], - [Define this if a modern libltdl is already installed]) - LIBLTDL=-lltdl - LTDLDEPS= - LTDLINCL= - ;; - ,no*,no,*) - AC_MSG_ERROR([`--with-ltdl-include' and `--with-ltdl-lib' options must be used together]) - ;; - *) with_included_ltdl=no - LIBLTDL="-L$with_ltdl_lib -lltdl" - LTDLDEPS= - LTDLINCL="-I$with_ltdl_include" - ;; -esac -INCLTDL="$LTDLINCL" - -# Report our decision... -AC_MSG_CHECKING([where to find libltdl headers]) -AC_MSG_RESULT([$LTDLINCL]) -AC_MSG_CHECKING([where to find libltdl library]) -AC_MSG_RESULT([$LIBLTDL]) - -_LTDL_SETUP - -dnl restore autoconf definition. -m4_popdef([AC_LIBOBJ]) -m4_popdef([AC_LIBSOURCES]) - -AC_CONFIG_COMMANDS_PRE([ - _ltdl_libobjs= - _ltdl_ltlibobjs= - if test -n "$_LT_LIBOBJS"; then - # Remove the extension. - _lt_sed_drop_objext='s/\.o$//;s/\.obj$//' - for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do - _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext" - _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo" - done - fi - AC_SUBST([ltdl_LIBOBJS], [$_ltdl_libobjs]) - AC_SUBST([ltdl_LTLIBOBJS], [$_ltdl_ltlibobjs]) -]) - -# Only expand once: -m4_define([LTDL_INIT]) -])# LTDL_INIT - -# Old names: -AU_DEFUN([AC_LIB_LTDL], [LTDL_INIT($@)]) -AU_DEFUN([AC_WITH_LTDL], [LTDL_INIT($@)]) -AU_DEFUN([LT_WITH_LTDL], [LTDL_INIT($@)]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIB_LTDL], []) -dnl AC_DEFUN([AC_WITH_LTDL], []) -dnl AC_DEFUN([LT_WITH_LTDL], []) - - -# _LTDL_SETUP -# ----------- -# Perform all the checks necessary for compilation of the ltdl objects -# -- including compiler checks and header checks. This is a public -# interface mainly for the benefit of libltdl's own configure.ac, most -# other users should call LTDL_INIT instead. -AC_DEFUN([_LTDL_SETUP], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_SYS_MODULE_EXT])dnl -AC_REQUIRE([LT_SYS_MODULE_PATH])dnl -AC_REQUIRE([LT_SYS_DLSEARCH_PATH])dnl -AC_REQUIRE([LT_LIB_DLLOAD])dnl -AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl -AC_REQUIRE([LT_FUNC_DLSYM_USCORE])dnl -AC_REQUIRE([LT_SYS_DLOPEN_DEPLIBS])dnl -AC_REQUIRE([gl_FUNC_ARGZ])dnl - -m4_require([_LT_CHECK_OBJDIR])dnl -m4_require([_LT_HEADER_DLFCN])dnl -m4_require([_LT_CHECK_DLPREOPEN])dnl -m4_require([_LT_DECL_SED])dnl - -dnl Don't require this, or it will be expanded earlier than the code -dnl that sets the variables it relies on: -_LT_ENABLE_INSTALL - -dnl _LTDL_MODE specific code must be called at least once: -_LTDL_MODE_DISPATCH - -# In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS -# the user used. This is so that ltdl.h can pick up the parent projects -# config.h file, The first file in AC_CONFIG_HEADERS must contain the -# definitions required by ltdl.c. -# FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility). -AC_CONFIG_COMMANDS_PRE([dnl -m4_pattern_allow([^LT_CONFIG_H$])dnl -m4_ifset([AH_HEADER], - [LT_CONFIG_H=AH_HEADER], - [m4_ifset([AC_LIST_HEADERS], - [LT_CONFIG_H=`echo "AC_LIST_HEADERS" | $SED 's,^[[ ]]*,,;s,[[ :]].*$,,'`], - [])])]) -AC_SUBST([LT_CONFIG_H]) - -AC_CHECK_HEADERS([unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h], - [], [], [AC_INCLUDES_DEFAULT]) - -AC_CHECK_FUNCS([closedir opendir readdir], [], [AC_LIBOBJ([lt__dirent])]) -AC_CHECK_FUNCS([strlcat strlcpy], [], [AC_LIBOBJ([lt__strl])]) - -m4_pattern_allow([LT_LIBEXT])dnl -AC_DEFINE_UNQUOTED([LT_LIBEXT],["$libext"],[The archive extension]) - -name= -eval "lt_libprefix=\"$libname_spec\"" -m4_pattern_allow([LT_LIBPREFIX])dnl -AC_DEFINE_UNQUOTED([LT_LIBPREFIX],["$lt_libprefix"],[The archive prefix]) - -name=ltdl -eval "LTDLOPEN=\"$libname_spec\"" -AC_SUBST([LTDLOPEN]) -])# _LTDL_SETUP - - -# _LT_ENABLE_INSTALL -# ------------------ -m4_define([_LT_ENABLE_INSTALL], -[AC_ARG_ENABLE([ltdl-install], - [AS_HELP_STRING([--enable-ltdl-install], [install libltdl])]) - -case ,${enable_ltdl_install},${enable_ltdl_convenience} in - *yes*) ;; - *) enable_ltdl_convenience=yes ;; -esac - -m4_ifdef([AM_CONDITIONAL], -[AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno) - AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno)]) -])# _LT_ENABLE_INSTALL - - -# LT_SYS_DLOPEN_DEPLIBS -# --------------------- -AC_DEFUN([LT_SYS_DLOPEN_DEPLIBS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_CACHE_CHECK([whether deplibs are loaded by dlopen], - [lt_cv_sys_dlopen_deplibs], - [# PORTME does your system automatically load deplibs for dlopen? - # or its logical equivalent (e.g. shl_load for HP-UX < 11) - # For now, we just catch OSes we know something about -- in the - # future, we'll try test this programmatically. - lt_cv_sys_dlopen_deplibs=unknown - case $host_os in - aix3*|aix4.1.*|aix4.2.*) - # Unknown whether this is true for these versions of AIX, but - # we want this `case' here to explicitly catch those versions. - lt_cv_sys_dlopen_deplibs=unknown - ;; - aix[[4-9]]*) - lt_cv_sys_dlopen_deplibs=yes - ;; - amigaos*) - case $host_cpu in - powerpc) - lt_cv_sys_dlopen_deplibs=no - ;; - esac - ;; - darwin*) - # Assuming the user has installed a libdl from somewhere, this is true - # If you are looking for one http://www.opendarwin.org/projects/dlcompat - lt_cv_sys_dlopen_deplibs=yes - ;; - freebsd* | dragonfly*) - lt_cv_sys_dlopen_deplibs=yes - ;; - gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu) - # GNU and its variants, using gnu ld.so (Glibc) - lt_cv_sys_dlopen_deplibs=yes - ;; - hpux10*|hpux11*) - lt_cv_sys_dlopen_deplibs=yes - ;; - interix*) - lt_cv_sys_dlopen_deplibs=yes - ;; - irix[[12345]]*|irix6.[[01]]*) - # Catch all versions of IRIX before 6.2, and indicate that we don't - # know how it worked for any of those versions. - lt_cv_sys_dlopen_deplibs=unknown - ;; - irix*) - # The case above catches anything before 6.2, and it's known that - # at 6.2 and later dlopen does load deplibs. - lt_cv_sys_dlopen_deplibs=yes - ;; - netbsd*) - lt_cv_sys_dlopen_deplibs=yes - ;; - openbsd*) - lt_cv_sys_dlopen_deplibs=yes - ;; - osf[[1234]]*) - # dlopen did load deplibs (at least at 4.x), but until the 5.x series, - # it did *not* use an RPATH in a shared library to find objects the - # library depends on, so we explicitly say `no'. - lt_cv_sys_dlopen_deplibs=no - ;; - osf5.0|osf5.0a|osf5.1) - # dlopen *does* load deplibs and with the right loader patch applied - # it even uses RPATH in a shared library to search for shared objects - # that the library depends on, but there's no easy way to know if that - # patch is installed. Since this is the case, all we can really - # say is unknown -- it depends on the patch being installed. If - # it is, this changes to `yes'. Without it, it would be `no'. - lt_cv_sys_dlopen_deplibs=unknown - ;; - osf*) - # the two cases above should catch all versions of osf <= 5.1. Read - # the comments above for what we know about them. - # At > 5.1, deplibs are loaded *and* any RPATH in a shared library - # is used to find them so we can finally say `yes'. - lt_cv_sys_dlopen_deplibs=yes - ;; - qnx*) - lt_cv_sys_dlopen_deplibs=yes - ;; - solaris*) - lt_cv_sys_dlopen_deplibs=yes - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - libltdl_cv_sys_dlopen_deplibs=yes - ;; - esac - ]) -if test "$lt_cv_sys_dlopen_deplibs" != yes; then - AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1], - [Define if the OS needs help to load dependent libraries for dlopen().]) -fi -])# LT_SYS_DLOPEN_DEPLIBS - -# Old name: -AU_ALIAS([AC_LTDL_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], []) - - -# LT_SYS_MODULE_EXT -# ----------------- -AC_DEFUN([LT_SYS_MODULE_EXT], -[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl -AC_CACHE_CHECK([which extension is used for runtime loadable modules], - [libltdl_cv_shlibext], -[ -module=yes -eval libltdl_cv_shlibext=$shrext_cmds -module=no -eval libltdl_cv_shrext=$shrext_cmds - ]) -if test -n "$libltdl_cv_shlibext"; then - m4_pattern_allow([LT_MODULE_EXT])dnl - AC_DEFINE_UNQUOTED([LT_MODULE_EXT], ["$libltdl_cv_shlibext"], - [Define to the extension used for runtime loadable modules, say, ".so".]) -fi -if test "$libltdl_cv_shrext" != "$libltdl_cv_shlibext"; then - m4_pattern_allow([LT_SHARED_EXT])dnl - AC_DEFINE_UNQUOTED([LT_SHARED_EXT], ["$libltdl_cv_shrext"], - [Define to the shared library suffix, say, ".dylib".]) -fi -])# LT_SYS_MODULE_EXT - -# Old name: -AU_ALIAS([AC_LTDL_SHLIBEXT], [LT_SYS_MODULE_EXT]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LTDL_SHLIBEXT], []) - - -# LT_SYS_MODULE_PATH -# ------------------ -AC_DEFUN([LT_SYS_MODULE_PATH], -[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl -AC_CACHE_CHECK([which variable specifies run-time module search path], - [lt_cv_module_path_var], [lt_cv_module_path_var="$shlibpath_var"]) -if test -n "$lt_cv_module_path_var"; then - m4_pattern_allow([LT_MODULE_PATH_VAR])dnl - AC_DEFINE_UNQUOTED([LT_MODULE_PATH_VAR], ["$lt_cv_module_path_var"], - [Define to the name of the environment variable that determines the run-time module search path.]) -fi -])# LT_SYS_MODULE_PATH - -# Old name: -AU_ALIAS([AC_LTDL_SHLIBPATH], [LT_SYS_MODULE_PATH]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LTDL_SHLIBPATH], []) - - -# LT_SYS_DLSEARCH_PATH -# -------------------- -AC_DEFUN([LT_SYS_DLSEARCH_PATH], -[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl -AC_CACHE_CHECK([for the default library search path], - [lt_cv_sys_dlsearch_path], - [lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec"]) -if test -n "$lt_cv_sys_dlsearch_path"; then - sys_dlsearch_path= - for dir in $lt_cv_sys_dlsearch_path; do - if test -z "$sys_dlsearch_path"; then - sys_dlsearch_path="$dir" - else - sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir" - fi - done - m4_pattern_allow([LT_DLSEARCH_PATH])dnl - AC_DEFINE_UNQUOTED([LT_DLSEARCH_PATH], ["$sys_dlsearch_path"], - [Define to the system default library search path.]) -fi -])# LT_SYS_DLSEARCH_PATH - -# Old name: -AU_ALIAS([AC_LTDL_SYSSEARCHPATH], [LT_SYS_DLSEARCH_PATH]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LTDL_SYSSEARCHPATH], []) - - -# _LT_CHECK_DLPREOPEN -# ------------------- -m4_defun([_LT_CHECK_DLPREOPEN], -[m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen], - [libltdl_cv_preloaded_symbols], - [if test -n "$lt_cv_sys_global_symbol_pipe"; then - libltdl_cv_preloaded_symbols=yes - else - libltdl_cv_preloaded_symbols=no - fi - ]) -if test x"$libltdl_cv_preloaded_symbols" = xyes; then - AC_DEFINE([HAVE_PRELOADED_SYMBOLS], [1], - [Define if libtool can extract symbol lists from object files.]) -fi -])# _LT_CHECK_DLPREOPEN - - -# LT_LIB_DLLOAD -# ------------- -AC_DEFUN([LT_LIB_DLLOAD], -[m4_pattern_allow([^LT_DLLOADERS$]) -LT_DLLOADERS= -AC_SUBST([LT_DLLOADERS]) - -AC_LANG_PUSH([C]) - -LIBADD_DLOPEN= -AC_SEARCH_LIBS([dlopen], [dl], - [AC_DEFINE([HAVE_LIBDL], [1], - [Define if you have the libdl library or equivalent.]) - if test "$ac_cv_search_dlopen" != "none required" ; then - LIBADD_DLOPEN="-ldl" - fi - libltdl_cv_lib_dl_dlopen="yes" - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"], - [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#if HAVE_DLFCN_H -# include -#endif - ]], [[dlopen(0, 0);]])], - [AC_DEFINE([HAVE_LIBDL], [1], - [Define if you have the libdl library or equivalent.]) - libltdl_cv_func_dlopen="yes" - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"], - [AC_CHECK_LIB([svld], [dlopen], - [AC_DEFINE([HAVE_LIBDL], [1], - [Define if you have the libdl library or equivalent.]) - LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes" - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"])])]) -if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes -then - lt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBADD_DLOPEN" - AC_CHECK_FUNCS([dlerror]) - LIBS="$lt_save_LIBS" -fi -AC_SUBST([LIBADD_DLOPEN]) - -LIBADD_SHL_LOAD= -AC_CHECK_FUNC([shl_load], - [AC_DEFINE([HAVE_SHL_LOAD], [1], - [Define if you have the shl_load function.]) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"], - [AC_CHECK_LIB([dld], [shl_load], - [AC_DEFINE([HAVE_SHL_LOAD], [1], - [Define if you have the shl_load function.]) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la" - LIBADD_SHL_LOAD="-ldld"])]) -AC_SUBST([LIBADD_SHL_LOAD]) - -case $host_os in -darwin[[1567]].*) -# We only want this for pre-Mac OS X 10.4. - AC_CHECK_FUNC([_dyld_func_lookup], - [AC_DEFINE([HAVE_DYLD], [1], - [Define if you have the _dyld_func_lookup function.]) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la"]) - ;; -beos*) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la" - ;; -cygwin* | mingw* | os2* | pw32*) - AC_CHECK_DECLS([cygwin_conv_path], [], [], [[#include ]]) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la" - ;; -esac - -AC_CHECK_LIB([dld], [dld_link], - [AC_DEFINE([HAVE_DLD], [1], - [Define if you have the GNU dld library.]) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la"]) -AC_SUBST([LIBADD_DLD_LINK]) - -m4_pattern_allow([^LT_DLPREOPEN$]) -LT_DLPREOPEN= -if test -n "$LT_DLLOADERS" -then - for lt_loader in $LT_DLLOADERS; do - LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader " - done - AC_DEFINE([HAVE_LIBDLLOADER], [1], - [Define if libdlloader will be built on this platform]) -fi -AC_SUBST([LT_DLPREOPEN]) - -dnl This isn't used anymore, but set it for backwards compatibility -LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD" -AC_SUBST([LIBADD_DL]) - -AC_LANG_POP -])# LT_LIB_DLLOAD - -# Old name: -AU_ALIAS([AC_LTDL_DLLIB], [LT_LIB_DLLOAD]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LTDL_DLLIB], []) - - -# LT_SYS_SYMBOL_USCORE -# -------------------- -# does the compiler prefix global symbols with an underscore? -AC_DEFUN([LT_SYS_SYMBOL_USCORE], -[m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -AC_CACHE_CHECK([for _ prefix in compiled symbols], - [lt_cv_sys_symbol_underscore], - [lt_cv_sys_symbol_underscore=no - cat > conftest.$ac_ext <<_LT_EOF -void nm_test_func(){} -int main(){nm_test_func;return 0;} -_LT_EOF - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - ac_nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then - # See whether the symbols have a leading underscore. - if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then - lt_cv_sys_symbol_underscore=yes - else - if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then - : - else - echo "configure: cannot find nm_test_func in $ac_nlist" >&AS_MESSAGE_LOG_FD - fi - fi - else - echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.c >&AS_MESSAGE_LOG_FD - fi - rm -rf conftest* - ]) - sys_symbol_underscore=$lt_cv_sys_symbol_underscore - AC_SUBST([sys_symbol_underscore]) -])# LT_SYS_SYMBOL_USCORE - -# Old name: -AU_ALIAS([AC_LTDL_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LTDL_SYMBOL_USCORE], []) - - -# LT_FUNC_DLSYM_USCORE -# -------------------- -AC_DEFUN([LT_FUNC_DLSYM_USCORE], -[AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl -if test x"$lt_cv_sys_symbol_underscore" = xyes; then - if test x"$libltdl_cv_func_dlopen" = xyes || - test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then - AC_CACHE_CHECK([whether we have to add an underscore for dlsym], - [libltdl_cv_need_uscore], - [libltdl_cv_need_uscore=unknown - save_LIBS="$LIBS" - LIBS="$LIBS $LIBADD_DLOPEN" - _LT_TRY_DLOPEN_SELF( - [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes], - [], [libltdl_cv_need_uscore=cross]) - LIBS="$save_LIBS" - ]) - fi -fi - -if test x"$libltdl_cv_need_uscore" = xyes; then - AC_DEFINE([NEED_USCORE], [1], - [Define if dlsym() requires a leading underscore in symbol names.]) -fi -])# LT_FUNC_DLSYM_USCORE - -# Old name: -AU_ALIAS([AC_LTDL_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LTDL_DLSYM_USCORE], []) - -# Copyright (C) 2002-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.13' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.13.4], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.13.4])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# Figure out how to run the assembler. -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_AS -# ---------- -AC_DEFUN([AM_PROG_AS], -[# By default we simply use the C compiler to build assembly code. -AC_REQUIRE([AC_PROG_CC]) -test "${CCAS+set}" = set || CCAS=$CC -test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS -AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)]) -AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)]) -_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl -]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to -# '$srcdir', '$srcdir/..', or '$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is '.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ([2.52])dnl - m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], - [$1], [CXX], [depcc="$CXX" am_compiler_list=], - [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], - [$1], [UPC], [depcc="$UPC" am_compiler_list=], - [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES. -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE([dependency-tracking], [dnl -AS_HELP_STRING( - [--enable-dependency-tracking], - [do not reject slow dependency extractors]) -AS_HELP_STRING( - [--disable-dependency-tracking], - [speeds up one-time build])]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each '.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.65])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[AC_DIAGNOSE([obsolete], - [$0: two- and three-arguments forms are deprecated.]) -m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if( - m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), - [ok:ok],, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -AM_MISSING_PROG([AUTOCONF], [autoconf]) -AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -AM_MISSING_PROG([AUTOHEADER], [autoheader]) -AM_MISSING_PROG([MAKEINFO], [makeinfo]) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -AC_REQUIRE([AM_SILENT_RULES])dnl -dnl The testsuite driver may need to know about EXEEXT, so add the -dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This -dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl -]) - -dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST([install_sh])]) - -# Copyright (C) 2003-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- -# From Jim Meyering - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAINTAINER_MODE([DEFAULT-MODE]) -# ---------------------------------- -# Control maintainer-specific portions of Makefiles. -# Default is to disable them, unless 'enable' is passed literally. -# For symmetry, 'disable' may be passed as well. Anyway, the user -# can override the default with the --enable/--disable switch. -AC_DEFUN([AM_MAINTAINER_MODE], -[m4_case(m4_default([$1], [disable]), - [enable], [m4_define([am_maintainer_other], [disable])], - [disable], [m4_define([am_maintainer_other], [enable])], - [m4_define([am_maintainer_other], [enable]) - m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) -AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode's default is 'disable' unless 'enable' is passed - AC_ARG_ENABLE([maintainer-mode], - [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], - am_maintainer_other[ make rules and dependencies not useful - (and sometimes confusing) to the casual installer])], - [USE_MAINTAINER_MODE=$enableval], - [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST([MAINT])dnl -] -) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_CC_C_O -# -------------- -# Like AC_PROG_CC_C_O, but changed for automake. -AC_DEFUN([AM_PROG_CC_C_O], -[AC_REQUIRE([AC_PROG_CC_C_O])dnl -AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -# FIXME: we rely on the cache variable name because -# there is no other way. -set dummy $CC -am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` -eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o -if test "$am_t" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -dnl Make sure AC_PROG_CC is never called again, or it will override our -dnl setting of CC. -m4_define([AC_PROG_CC], - [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it is modern enough. -# If it is, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - AC_MSG_WARN(['missing' script is too old or missing]) -fi -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# -------------------- -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) - -# _AM_SET_OPTIONS(OPTIONS) -# ------------------------ -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT([yes]) -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi -AC_CONFIG_COMMANDS_PRE( - [AC_MSG_CHECKING([that generated files are newer than configure]) - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - AC_MSG_RESULT([done])]) -rm -f conftest.file -]) - -# Copyright (C) 2009-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl -AS_HELP_STRING( - [--enable-silent-rules], - [less verbose build output (undo: "make V=1")]) -AS_HELP_STRING( - [--disable-silent-rules], - [verbose build output (undo: "make V=0")])dnl -]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -dnl -dnl A few 'make' implementations (e.g., NonStop OS and NextStep) -dnl do not support nested variable expansions. -dnl See automake bug#9928 and bug#10237. -am_make=${MAKE-make} -AC_CACHE_CHECK([whether $am_make supports nested variables], - [am_cv_make_support_nested_variables], - [if AS_ECHO([['TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor 'install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in "make install-strip", and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# -------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of 'v7', 'ustar', or 'pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -# -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AC_SUBST([AMTAR], ['$${TAR-tar}']) - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' - -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - - [m4_case([$1], - [ustar], - [# The POSIX 1988 'ustar' format is defined with fixed-size fields. - # There is notably a 21 bits limit for the UID and the GID. In fact, - # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 - # and bug#13588). - am_max_uid=2097151 # 2^21 - 1 - am_max_gid=$am_max_uid - # The $UID and $GID variables are not portable, so we need to resort - # to the POSIX-mandated id(1) utility. Errors in the 'id' calls - # below are definitely unexpected, so allow the users to see them - # (that is, avoid stderr redirection). - am_uid=`id -u || echo unknown` - am_gid=`id -g || echo unknown` - AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi - AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi], - - [pax], - [], - - [m4_fatal([Unknown tar format])]) - - AC_MSG_CHECKING([how to create a $1 tar archive]) - - # Go ahead even if we have the value already cached. We do so because we - # need to set the values for the 'am__tar' and 'am__untar' variables. - _am_tools=${am_cv_prog_tar_$1-$_am_tools} - - for _am_tool in $_am_tools; do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works. - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi - done - rm -rf conftest.dir - - AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) - AC_MSG_RESULT([$am_cv_prog_tar_$1])]) - -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([m4/asmcfi.m4]) -m4_include([m4/ax_append_flag.m4]) -m4_include([m4/ax_cc_maxopt.m4]) -m4_include([m4/ax_cflags_warn_all.m4]) -m4_include([m4/ax_check_compile_flag.m4]) -m4_include([m4/ax_compiler_vendor.m4]) -m4_include([m4/ax_configure_args.m4]) -m4_include([m4/ax_enable_builddir.m4]) -m4_include([m4/ax_gcc_archflag.m4]) -m4_include([m4/ax_gcc_x86_cpuid.m4]) -m4_include([m4/libtool.m4]) -m4_include([m4/ltoptions.m4]) -m4_include([m4/ltsugar.m4]) -m4_include([m4/ltversion.m4]) -m4_include([m4/lt~obsolete.m4]) -m4_include([acinclude.m4]) -- cgit v1.2.1