\section{\module{xmllib} ---
         A parser for XML documents.}
\declaremodule{standard}{xmllib}
\moduleauthor{Sjoerd Mullender}{Sjoerd.Mullender@cwi.nl}
\sectionauthor{Sjoerd Mullender}{Sjoerd.Mullender@cwi.nl}

\modulesynopsis{A parser for XML documents.}

\index{XML}

This module defines a class \class{XMLParser} which serves as the basis 
for parsing text files formatted in XML (eXtended Markup Language).

\begin{classdesc}{XMLParser}{}
The \class{XMLParser} class must be instantiated without arguments.
\end{classdesc}

This class provides the following interface methods and instance variables:

\begin{memberdesc}{attributes}
A mapping of element names to mappings.  The latter mapping maps
attribute names that are valid for the element to the default value of 
the attribute, or if there is no default to \code{None}.  The default
value is the empty dictionary.
\end{memberdesc}

\begin{memberdesc}{elements} 
A mapping of element names to tuples.  The tuples contain a function
for handling the start and end tag respectively of the element, or
\code{None} if the method \method{unknown_starttag()} or
\method{unknown_endtag()} is to be called.  The default value is the
empty dictionary.
\end{memberdesc}

\begin{memberdesc}{entitydefs}
A mapping of entitynames to their values.  The default value contains
definitions for \code{'lt'}, \code{'gt'}, \code{'amp'}, \code{'quot'}, 
and \code{'apos'}.
\end{memberdesc}

\begin{methoddesc}{reset}{}
Reset the instance.  Loses all unprocessed data.  This is called
implicitly at the instantiation time.
\end{methoddesc}

\begin{methoddesc}{setnomoretags}{}
Stop processing tags.  Treat all following input as literal input
(CDATA).
\end{methoddesc}

\begin{methoddesc}{setliteral}{}
Enter literal mode (CDATA mode).  This mode is automatically exited
when the close tag matching the last unclosed open tag is encountered.
\end{methoddesc}

\begin{methoddesc}{feed}{data}
Feed some text to the parser.  It is processed insofar as it consists
of complete tags; incomplete data is buffered until more data is
fed or \method{close()} is called.
\end{methoddesc}

\begin{methoddesc}{close}{}
Force processing of all buffered data as if it were followed by an
end-of-file mark.  This method may be redefined by a derived class to
define additional processing at the end of the input, but the
redefined version should always call \method{close()}.
\end{methoddesc}

\begin{methoddesc}{translate_references}{data}
Translate all entity and character references in \var{data} and
returns the translated string.
\end{methoddesc}

\begin{methoddesc}{handle_xml}{encoding, standalone}
This method is called when the \samp{<?xml ...?>} tag is processed.
The arguments are the values of the encoding and standalone attributes 
in the tag.  Both encoding and standalone are optional.  The values
passed to \method{handle_xml()} default to \code{None} and the string
\code{'no'} respectively.
\end{methoddesc}

\begin{methoddesc}{handle_doctype}{tag, data}
This method is called when the \samp{<!DOCTYPE...>} tag is processed.
The arguments are the name of the root element and the uninterpreted
contents of the tag, starting after the white space after the name of
the root element.
\end{methoddesc}

\begin{methoddesc}{handle_starttag}{tag, method, attributes}
This method is called to handle start tags for which a start tag
handler is defined in the instance variable \member{elements}.  The
\var{tag} argument is the name of the tag, and the \var{method}
argument is the function (method) which should be used to support semantic
interpretation of the start tag.  The \var{attributes} argument is a
dictionary of attributes, the key being the \var{name} and the value
being the \var{value} of the attribute found inside the tag's
\code{<>} brackets.  Character and entity references in the
\var{value} have been interpreted.  For instance, for the start tag
\code{<A HREF="http://www.cwi.nl/">}, this method would be called as
\code{handle_starttag('A', self.elements['A'][0], \{'HREF': 'http://www.cwi.nl/'\})}.
The base implementation simply calls \var{method} with \var{attributes}
as the only argument.
\end{methoddesc}

\begin{methoddesc}{handle_endtag}{tag, method}
This method is called to handle endtags for which an end tag handler
is defined in the instance variable \member{elements}.  The \var{tag}
argument is the name of the tag, and the \var{method} argument is the
function (method) which should be used to support semantic
interpretation of the end tag.  For instance, for the endtag
\code{</A>}, this method would be called as \code{handle_endtag('A',
self.elements['A'][1])}.  The base implementation simply calls
\var{method}.
\end{methoddesc}

\begin{methoddesc}{handle_data}{data}
This method is called to process arbitrary data.  It is intended to be
overridden by a derived class; the base class implementation does
nothing.
\end{methoddesc}

\begin{methoddesc}{handle_charref}{ref}
This method is called to process a character reference of the form
\samp{\&\#\var{ref};}.  \var{ref} can either be a decimal number,
or a hexadecimal number when preceded by an \character{x}.
In the base implementation, \var{ref} must be a number in the
range 0-255.  It translates the character to \ASCII{} and calls the
method \method{handle_data()} with the character as argument.  If
\var{ref} is invalid or out of range, the method
\code{unknown_charref(\var{ref})} is called to handle the error.  A
subclass must override this method to provide support for character
references outside of the \ASCII{} range.
\end{methoddesc}

\begin{methoddesc}{handle_entityref}{ref}
This method is called to process a general entity reference of the
form \samp{\&\var{ref};} where \var{ref} is an general entity
reference.  It looks for \var{ref} in the instance (or class)
variable \member{entitydefs} which should be a mapping from entity
names to corresponding translations.
If a translation is found, it calls the method \method{handle_data()}
with the translation; otherwise, it calls the method
\code{unknown_entityref(\var{ref})}.  The default \member{entitydefs}
defines translations for \code{\&amp;}, \code{\&apos}, \code{\&gt;},
\code{\&lt;}, and \code{\&quot;}.
\end{methoddesc}

\begin{methoddesc}{handle_comment}{comment}
This method is called when a comment is encountered.  The
\var{comment} argument is a string containing the text between the
\samp{<!--} and \samp{-->} delimiters, but not the delimiters
themselves.  For example, the comment \samp{<!--text-->} will
cause this method to be called with the argument \code{'text'}.  The
default method does nothing.
\end{methoddesc}

\begin{methoddesc}{handle_cdata}{data}
This method is called when a CDATA element is encountered.  The
\var{data} argument is a string containing the text between the
\samp{<![CDATA[} and \samp{]]>} delimiters, but not the delimiters
themselves.  For example, the entity \samp{<![CDATA[text]]>} will
cause this method to be called with the argument \code{'text'}.  The
default method does nothing, and is intended to be overridden.
\end{methoddesc}

\begin{methoddesc}{handle_proc}{name, data}
This method is called when a processing instruction (PI) is
encountered.  The \var{name} is the PI target, and the \var{data}
argument is a string containing the text between the PI target and the
closing delimiter, but not the delimiter itself.  For example, the
instruction \samp{<?XML text?>} will cause this method to be called
with the arguments \code{'XML'} and \code{'text'}.  The default method
does nothing.  Note that if a document starts with \samp{<?xml
..?>}, \method{handle_xml()} is called to handle it.
\end{methoddesc}

\begin{methoddesc}{handle_special}{data}
This method is called when a declaration is encountered.  The
\var{data} argument is a string containing the text between the
\samp{<!} and \samp{>} delimiters, but not the delimiters
themselves.  For example, the entity \samp{<!ENTITY text>} will
cause this method to be called with the argument \code{'ENTITY text'}.  The
default method does nothing.  Note that \samp{<!DOCTYPE ...>} is
handled separately if it is located at the start of the document.
\end{methoddesc}

\begin{methoddesc}{syntax_error}{message}
This method is called when a syntax error is encountered.  The
\var{message} is a description of what was wrong.  The default method 
raises a \exception{RuntimeError} exception.  If this method is
overridden, it is permissable for it to return.  This method is only
called when the error can be recovered from.  Unrecoverable errors
raise a \exception{RuntimeError} without first calling
\method{syntax_error()}.
\end{methoddesc}

\begin{methoddesc}{unknown_starttag}{tag, attributes}
This method is called to process an unknown start tag.  It is intended
to be overridden by a derived class; the base class implementation
does nothing.
\end{methoddesc}

\begin{methoddesc}{unknown_endtag}{tag}
This method is called to process an unknown end tag.  It is intended
to be overridden by a derived class; the base class implementation
does nothing.
\end{methoddesc}

\begin{methoddesc}{unknown_charref}{ref}
This method is called to process unresolvable numeric character
references.  It is intended to be overridden by a derived class; the
base class implementation does nothing.
\end{methoddesc}

\begin{methoddesc}{unknown_entityref}{ref}
This method is called to process an unknown entity reference.  It is
intended to be overridden by a derived class; the base class
implementation does nothing.
\end{methoddesc}

\subsection{XML Namespaces}

This module has support for XML namespaces as defined in the XML
Namespaces proposed recommendation.

Tag and attribute names that are defined in an XML namespace are
handled as if the name of the tag or element consisted of the
namespace (i.e. the URL that defines the namespace) followed by a
space and the name of the tag or attribute.  For instance, the tag
\code{<html xmlns='http://www.w3.org/TR/REC-html40'>} is treated as if 
the tag name was \code{'http://www.w3.org/TR/REC-html40 html'}, and
the tag \code{<html:a href='http://frob.com'>} inside the above
mentioned element is treated as if the tag name were
\code{'http://www.w3.org/TR/REC-html40 a'} and the attribute name as
if it were \code{'http://www.w3.org/TR/REC-html40 src'}.

An older draft of the XML Namespaces proposal is also recognized, but
triggers a warning.