Common » Base Template Reference $Id: common.xsl 9347 2012-05-11 03:49:49Z bobstayton $ Introduction This is technical reference documentation for the “base” set of common templates in the DocBook XSL Stylesheets. This is not intended to be user documentation. It is provided for developers writing customization layers for the stylesheets. is.component Tests if a given node is a component-level element <xsl:template name="is.component"> <xsl:param name="node" select="."/> ... </xsl:template> Description This template returns '1' if the specified node is a component (Chapter, Appendix, etc.), and '0' otherwise. Parameters node The node which is to be tested. Returns This template returns '1' if the specified node is a component (Chapter, Appendix, etc.), and '0' otherwise. is.section Tests if a given node is a section-level element <xsl:template name="is.section"> <xsl:param name="node" select="."/> ... </xsl:template> Description This template returns '1' if the specified node is a section (Section, Sect1, Sect2, etc.), and '0' otherwise. Parameters node The node which is to be tested. Returns This template returns '1' if the specified node is a section (Section, Sect1, Sect2, etc.), and '0' otherwise. section.level Returns the hierarchical level of a section <xsl:template name="section.level"> <xsl:param name="node" select="."/> ... </xsl:template> Description This template calculates the hierarchical level of a section. The element sect1 is at level 1, sect2 is at level 2, etc. Recursive sections are calculated down to the fifth level. Parameters node The section node for which the level should be calculated. Defaults to the context node. Returns The section level, 1, 2, etc. qanda.section.level Returns the hierarchical level of a QandASet <xsl:template name="qanda.section.level"/> Description This template calculates the hierarchical level of a QandASet. Returns The level, 1, 2, etc. select.mediaobject Selects and processes an appropriate media object from a list <xsl:template name="select.mediaobject"> <xsl:param name="olist" select="imageobject|imageobjectco |videoobject|audioobject|textobject"/> ... </xsl:template> Description This template takes a list of media objects (usually the children of a mediaobject or inlinemediaobject) and processes the "right" object. This template relies on a template named "select.mediaobject.index" to determine which object in the list is appropriate. If no acceptable object is located, nothing happens. Parameters olist The node list of potential objects to examine. Returns Calls <xsl:apply-templates> on the selected object. select.mediaobject.index Selects the position of the appropriate media object from a list <xsl:template name="select.mediaobject.index"> <xsl:param name="olist" select="imageobject|imageobjectco |videoobject|audioobject|textobject"/> <xsl:param name="count">1</xsl:param> ... </xsl:template> Description This template takes a list of media objects (usually the children of a mediaobject or inlinemediaobject) and determines the "right" object. It returns the position of that object to be used by the calling template. If the parameter use.role.for.mediaobject is nonzero, then it first checks for an object with a role attribute of the appropriate value. It takes the first of those. Otherwise, it takes the first acceptable object through a recursive pass through the list. This template relies on a template named "is.acceptable.mediaobject" to determine if a given object is an acceptable graphic. The semantics of media objects is that the first acceptable graphic should be used. If no acceptable object is located, no index is returned. Parameters olist The node list of potential objects to examine. count The position in the list currently being considered by the recursive process. Returns Returns the position in the original list of the selected object. is.acceptable.mediaobject Returns '1' if the specified media object is recognized <xsl:template name="is.acceptable.mediaobject"> <xsl:param name="object"/> ... </xsl:template> Description This template examines a media object and returns '1' if the object is recognized as a graphic. Parameters object The media object to consider. Returns 0 or 1 check.id.unique Warn users about references to non-unique IDs <xsl:template name="check.id.unique"> <xsl:param name="linkend"/> ... </xsl:template> Description If passed an ID in linkend, check.id.unique prints a warning message to the user if either the ID does not exist or the ID is not unique. check.idref.targets Warn users about incorrectly typed references <xsl:template name="check.idref.targets"> <xsl:param name="linkend"/> <xsl:param name="element-list"/> ... </xsl:template> Description If passed an ID in linkend, check.idref.targets makes sure that the element pointed to by the link is one of the elements listed in element-list and warns the user otherwise. copyright.years Print a set of years with collapsed ranges <xsl:template name="copyright.years"> <xsl:param name="years"/> <xsl:param name="print.ranges" select="1"/> <xsl:param name="single.year.ranges" select="0"/> <xsl:param name="firstyear" select="0"/> <xsl:param name="nextyear" select="0"/> ... </xsl:template> Description This template prints a list of year elements with consecutive years printed as a range. In other words: <year>1992</year> <year>1993</year> <year>1994</year> is printed 1992-1994, whereas: <year>1992</year> <year>1994</year> is printed 1992, 1994. This template assumes that all the year elements contain only decimal year numbers, that the elements are sorted in increasing numerical order, that there are no duplicates, and that all the years are expressed in full century+year (1999 not 99) notation. Parameters years The initial set of year elements. print.ranges If non-zero, multi-year ranges are collapsed. If zero, all years are printed discretely. single.year.ranges If non-zero, two consecutive years will be printed as a range, otherwise, they will be printed discretely. In other words, a single year range is 1991-1992 but discretely it's 1991, 1992. Returns This template returns the formatted list of years. find.path.params Search in a table for the "best" match for the node <xsl:template name="find.path.params"> <xsl:param name="node" select="."/> <xsl:param name="table" select="''"/> <xsl:param name="location"> <xsl:call-template name="xpath.location"> <xsl:with-param name="node" select="$node"/> </xsl:call-template> </xsl:param> ... </xsl:template> Description This template searches in a table for the value that most-closely (in the typical best-match sense of XSLT) matches the current (element) node location. string.upper Converts a string to all uppercase letters <xsl:template name="string.upper"> <xsl:param name="string" select="''"/> ... </xsl:template> Description Given a string, this template does a language-aware conversion of that string to all uppercase letters, based on the values of the lowercase.alpha and uppercase.alpha gentext keys for the current locale. It affects only those characters found in the values of lowercase.alpha and uppercase.alpha. All other characters are left unchanged. Parameters string The string to convert to uppercase. string.lower Converts a string to all lowercase letters <xsl:template name="string.lower"> <xsl:param name="string" select="''"/> ... </xsl:template> Description Given a string, this template does a language-aware conversion of that string to all lowercase letters, based on the values of the uppercase.alpha and lowercase.alpha gentext keys for the current locale. It affects only those characters found in the values of uppercase.alpha and lowercase.alpha. All other characters are left unchanged. Parameters string The string to convert to lowercase. select.choice.separator Returns localized choice separator <xsl:template name="select.choice.separator"/> Description This template enables auto-generation of an appropriate localized "choice" separator (for example, "and" or "or") before the final item in an inline list (though it could also be useful for generating choice separators for non-inline lists). It currently works by evaluating a processing instruction (PI) of the form <?dbchoice choice="foo"?> : if the value of the choice pseudo-attribute is "and" or "or", returns a localized "and" or "or" otherwise returns the literal value of the choice pseudo-attribute The latter is provided only as a temporary workaround because the locale files do not currently have translations for the word or. So if you want to generate a a logical "or" separator in French (for example), you currently need to do this: <?dbchoice choice="ou"?> The dbchoice processing instruction is an unfortunate hack; support for it may disappear in the future (particularly if and when a more appropriate means for marking up "choice" lists becomes available in DocBook). evaluate.info.profile Evaluates an info profile <xsl:template name="evaluate.info.profile"> <xsl:param name="profile"/> <xsl:param name="info"/> ... </xsl:template> Description This template evaluates an "info profile" matching the XPath expression given by the profile parameter. It relies on the XSLT evaluate() extension function. The value of the profile parameter can include the literal string $info. If found in the value of the profile parameter, the literal string $info string is replaced with the value of the info parameter, which should be a set of *info nodes; the expression is then evaluated using the XSLT evaluate() extension function. Parameters profile A string representing an XPath expression info A set of *info nodes Returns Returns a node (the result of evaluating the profile parameter) graphic.format.content-type Returns mimetype for media format <xsl:template name="graphic.format.content-type"> <xsl:param name="format"/> ... </xsl:template> Description This takes as input a 'format' param and returns a mimetype string. It uses an xsl:choose after first converting the input to all uppercase.